TECHNOMELT AS 5375

Technomelt AS 5375 (Known as Macro-melt Q 5375)

Polyolefins Hotemelt

Features and Benefits

Polyolefin hotmelt used for general assembly applications, especially for bonding and coating polypropylene or similar polyolefins.

TECHNOMELT? AS 5375 is a white to light beige, polyolefin hotmelt used for general assembly applications, especially for bonding and

coating polypropylene or similar polyolefins. It is also suitable for bonding metals, especially copper and aluminum.

- Used in general assembly

- Also suitable for metals, especially copper and aluminum

聚烯烃热熔胶，适合一般装配，尤其适用于粘接与涂覆聚丙烯或类似聚烯烃。

TECHNOMELT AS 5375是一种白色至浅米色、聚烯烃热熔胶，适合一般装配，尤其适用于粘接与涂覆聚丙烯或类似聚烯烃。它还适用于粘接金属，尤其是铜和铝。

用于一般装配

还适用于粘接金属，尤其是铜和铝

技术信息

基材 : 金属, 金属：铝镍钴, 金属：铜

技术类型 : 聚烯烃 (PO)

组分数量 : 单组份

颜色 : 棕色, 灰棕色, 白

Technology : Polyolefin

Appearance : White to light beige

Components : One-component

Operating Temperature Range : -40 to 100℃

Application : Molding compound thermoplastic

Cure : Physical setting

nourde low pressure molding material solutions

Softening Point, 0℃

ASTM E28 (in glycerine)

141

Viscosity @ 180 0℃, mPa.s (cP) 4,500

Elongation, % 300

Temperature creep resistance, ℃

Henkel method MH 11

90

Polyamide adhesive - nourde Adhesives

Application:

Application Temperature: 180 to 200℃

Application System: Hotmelt application system with gear pump

When bonding to a substrate with high thermal conductivity the use of

a specific application temperature is required for good wetting. Do not

heat the product above the specified application temperature range.

When the product is not in use do not apply heat, this will degrade the

quality of the product and in extreme cases cause carbonization.

---

如需TDS（Technical Data Sheets）, SDS（Safety Data Sheets）, RoHS（RoHS Data Sheets）…等资料或申请样品，请联系我们。

质量属性和版权声明：

1. 图片或视频，均来自产品实物拍摄；

2. 产品数据参数TDS，全部来自原厂官方文件。未作任何修改；

3. 工艺应用产品的图片、文字、视频，可能会牵涉到商业保密，如有发现请及时联系as@nourde.com协商处理；

4. 工艺技术经验，仅用于交流和分享；

5. 所有图文、视频，未经允许，禁止用于任何商业用途；

---