东莞市高创塑胶原料有限公司
美国杜邦PA66 8018HS 14%玻纤增强，超韧抗冲击良好的热稳定PA66
DuPont Performance Polymers Zytel? 8018HS NC010 Nylon 66 (Unverified Data )
Polymer,Thermoplastic,Nylon,Nylon 66,Nylon 66, 10% Glass Fiber Filled
DuPont Performance Polymers
产品说明:
14% Glass Reinforced Toughened Heat Stabilized Polyamide 66
Zytel 8018HS NC010 is a 14% glass reinforced heat stabilized toughened polyamide 66 resin.
Information provided by DuPont Performance Polymers
外观颜色：本色
DuPont Performance Polymers Zytel? 8018HS NC010 Nylon 66 (Unverified Data ) 物性表
物理性能
额定值 (公制)
额定值 (英制)
测试
密度
1.19 g/cc
0.0430 lb/in3
DAM; ISO 1183
吸水率
6.3 %@Thickness 2.00 mm
6.3 %@Thickness 0.0787 in
DAM; Sim. to ISO 62
水分吸收
1.90 %@Thickness 2.00 mm
1.90 %@Thickness 0.0787 in
DAM; Sim. to ISO 62
粘度测试
145 cm3/g
145 cm3/g
DAM; ISO 307 1157 1628
线性成型收缩率,Flow
0.0080 cm/cm
0.0080 in/in
DAM; ISO 294-4 2577
线性成型收缩率，横向
0.0070 cm/cm
0.0070 in/in
DAM; ISO 294-4 2577
机械性能
额定值 (公制)
额定值 (英制)
测试
抗张强度(断裂)
58.0 MPa
8410 psi
50%RH; ISO 527-1/-2
85.0 MPa
12300 psi
DAM; ISO 527-1/-2
伸长率 (断裂)
9.0 %
9.0 %
DAM; ISO 527-1/-2
14 %
14 %
50%RH; ISO 527-1/-2
拉伸模量
2.30 GPa
334 ksi
50%RH; ISO 527-1/-2
4.20 GPa
609 ksi
DAM; ISO 527-1/-2
弯曲模量
2.00 GPa
290 ksi
50%RH; ISO 178
3.60 GPa
522 ksi
DAM; ISO 178
悬壁梁缺口冲击强度
13.0 kJ/m2
6.19 ft-lb/in2
DAM; ISO 180/1A
18.0 kJ/m2
8.57 ft-lb/in2
50%RH; ISO 180/1A
5.00 kJ/m2@Temperature -40.0 °C
2.38 ft-lb/in2@Temperature -40.0 °F
50%RH; ISO 180/1A
5.00 kJ/m2@Temperature -30.0 °C
2.38 ft-lb/in2@Temperature -22.0 °F
50%RH; ISO 180/1A
7.00 kJ/m2@Temperature -40.0 °C
3.33 ft-lb/in2@Temperature -40.0 °F
DAM; ISO 180/1A
10.0 kJ/m2@Temperature -30.0 °C
4.76 ft-lb/in2@Temperature -22.0 °F
DAM; ISO 180/1A
悬壁梁无缺口冲击强度
90.0 kJ/m2
42.8 ft-lb/in2
DAM; ISO 180/1U
100 kJ/m2
47.6 ft-lb/in2
50%RH; ISO 180/1U
70.0 kJ/m2@Temperature -30.0 °C
33.3 ft-lb/in2@Temperature -22.0 °F
50%RH; ISO 180/1U
90.0 kJ/m2@Temperature -30.0 °C
42.8 ft-lb/in2@Temperature -22.0 °F
DAM; ISO 180/1U
简支梁无缺口冲击强度
8.00 J/cm2
38.1 ft-lb/in2
DAM; ISO 179/1eU
10.0 J/cm2
47.6 ft-lb/in2
50%RH; ISO 179/1eU
7.50 J/cm2@Temperature -30.0 °C
35.7 ft-lb/in2@Temperature -22.0 °F
50%RH; ISO 179/1eU
8.00 J/cm2@Temperature -30.0 °C
38.1 ft-lb/in2@Temperature -22.0 °F
DAM; ISO 179/1eU
简支梁缺口冲击强度
1.20 J/cm2
5.71 ft-lb/in2
DAM; ISO 179/1eA
1.80 J/cm2
8.57 ft-lb/in2
50%RH; ISO 179/1eA
0.400 J/cm2@Temperature -40.0 °C
1.90 ft-lb/in2@Temperature -40.0 °F
DAM; ISO 179/1eA
0.400 J/cm2@Temperature -40.0 °C
1.90 ft-lb/in2@Temperature -40.0 °F
50%RH; ISO 179/1eA
0.600 J/cm2@Temperature -30.0 °C
2.86 ft-lb/in2@Temperature -22.0 °F
DAM; ISO 179/1eA
0.600 J/cm2@Temperature -30.0 °C
2.86 ft-lb/in2@Temperature -22.0 °F
50%RH; ISO 179/1eA
电气性能
额定值 (公制)
额定值 (英制)
测试
相比耐漏电起痕指数(CTI)
580 V
580 V
DAM; IEC 60112
热性能
额定值 (公制)
额定值 (英制)
测试
线形热膨胀系数 - 流动
50.0 μm/m-°C
27.8 μin/in-°F
DAM; ISO 11359-1/-2
线性热膨胀系数,横向流动
118 μm/m-°C
65.6 μin/in-°F
DAM; ISO 11359-1/-2
熔融温度
263 °C
505 °F
DAM; 10°C/min; ISO 11357-1/-3
载荷下热变形温度(0.46 MPa)
246 °C
475 °F
DAM; ISO 75-1/-2
载荷下热变形温度(1.8 MPa)
195 °C
383 °F
DAM; ISO 75-1/-2
可燃性(UL94)
HB@Thickness 1.50 mm
HB@Thickness 0.0591 in
DAM; IEC 60695-11-10
HB@Thickness 0.800 mm
HB@Thickness 0.0315 in
DAM; IEC 60695-11-10
极限氧指数
21 %
21 %
DAM; ISO 4589-1/-2
材料描述
测试
Additives
Release agent
Delivery Form
Pellets
部件标识代码
PA66-IGF14
ISO 11469
加工
Injection Moulding
供货地区
North America
South and Central America
树脂识别
PA66-IGF14
特殊特性
Heat stabilised or stable to heat
UL recognition
UL
DAM
高创塑胶供应:PP，PE，PVC，ABS，PC，PC/ABS，PA6，PA66，,PA6T，PA9T，PAMXD6，IXEF，PA11，PA12，PBT，PET，PPS，LCP，PEI,PPSU，PSU，PVDF，PEEK，TPU，TPV，TPE，食品级降解塑料（PBAT，PLA，PBS，PBST）等。免费提供原料：物性表，UL黄卡，随货同行(提供)SGS,MSDS,FDA,LFGB,USP,COA,PFOS,REACH, ROSH/SONY等资料。
美国杜邦PA66 8018HS 14%玻纤增强，超韧抗冲击良好的热稳定PA66
DuPont Performance Polymers Zytel? 8018HS NC010 Nylon 66 (Unverified Data )
Polymer,Thermoplastic,Nylon,Nylon 66,Nylon 66, 10% Glass Fiber Filled
DuPont Performance Polymers
产品说明:
14% Glass Reinforced Toughened Heat Stabilized Polyamide 66
Zytel 8018HS NC010 is a 14% glass reinforced heat stabilized toughened polyamide 66 resin.
Information provided by DuPont Performance Polymers
外观颜色：本色
DuPont Performance Polymers Zytel? 8018HS NC010 Nylon 66 (Unverified Data ) 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试 |
|---|---|---|---|
| 密度 | 1.19 g/cc | 0.0430 lb/in3 | DAM; ISO 1183 |
| 吸水率 | 6.3 % @Thickness 2.00 mm |
6.3 % @Thickness 0.0787 in |
DAM; Sim. to ISO 62 |
| 水分吸收 | 1.90 % @Thickness 2.00 mm |
1.90 % @Thickness 0.0787 in |
DAM; Sim. to ISO 62 |
| 粘度测试 | 145 cm3/g | 145 cm3/g | DAM; ISO 307 1157 1628 |
| 线性成型收缩率,Flow | 0.0080 cm/cm | 0.0080 in/in | DAM; ISO 294-4 2577 |
| 线性成型收缩率，横向 | 0.0070 cm/cm | 0.0070 in/in | DAM; ISO 294-4 2577 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试 |
|---|---|---|---|
| 抗张强度(断裂) | 58.0 MPa | 8410 psi | 50%RH; ISO 527-1/-2 |
| 85.0 MPa | 12300 psi | DAM; ISO 527-1/-2 | |
| 伸长率 (断裂) | 9.0 % | 9.0 % | DAM; ISO 527-1/-2 |
| 14 % | 14 % | 50%RH; ISO 527-1/-2 | |
| 拉伸模量 | 2.30 GPa | 334 ksi | 50%RH; ISO 527-1/-2 |
| 4.20 GPa | 609 ksi | DAM; ISO 527-1/-2 | |
| 弯曲模量 | 2.00 GPa | 290 ksi | 50%RH; ISO 178 |
| 3.60 GPa | 522 ksi | DAM; ISO 178 | |
| 悬壁梁缺口冲击强度 | 13.0 kJ/m2 | 6.19 ft-lb/in2 | DAM; ISO 180/1A |
| 18.0 kJ/m2 | 8.57 ft-lb/in2 | 50%RH; ISO 180/1A | |
| 5.00 kJ/m2 @Temperature -40.0 °C |
2.38 ft-lb/in2 @Temperature -40.0 °F |
50%RH; ISO 180/1A | |
| 5.00 kJ/m2 @Temperature -30.0 °C |
2.38 ft-lb/in2 @Temperature -22.0 °F |
50%RH; ISO 180/1A | |
| 7.00 kJ/m2 @Temperature -40.0 °C |
3.33 ft-lb/in2 @Temperature -40.0 °F |
DAM; ISO 180/1A | |
| 10.0 kJ/m2 @Temperature -30.0 °C |
4.76 ft-lb/in2 @Temperature -22.0 °F |
DAM; ISO 180/1A | |
| 悬壁梁无缺口冲击强度 | 90.0 kJ/m2 | 42.8 ft-lb/in2 | DAM; ISO 180/1U |
| 100 kJ/m2 | 47.6 ft-lb/in2 | 50%RH; ISO 180/1U | |
| 70.0 kJ/m2 @Temperature -30.0 °C |
33.3 ft-lb/in2 @Temperature -22.0 °F |
50%RH; ISO 180/1U | |
| 90.0 kJ/m2 @Temperature -30.0 °C |
42.8 ft-lb/in2 @Temperature -22.0 °F |
DAM; ISO 180/1U | |
| 简支梁无缺口冲击强度 | 8.00 J/cm2 | 38.1 ft-lb/in2 | DAM; ISO 179/1eU |
| 10.0 J/cm2 | 47.6 ft-lb/in2 | 50%RH; ISO 179/1eU | |
| 7.50 J/cm2 @Temperature -30.0 °C |
35.7 ft-lb/in2 @Temperature -22.0 °F |
50%RH; ISO 179/1eU | |
| 8.00 J/cm2 @Temperature -30.0 °C |
38.1 ft-lb/in2 @Temperature -22.0 °F |
DAM; ISO 179/1eU | |
| 简支梁缺口冲击强度 | 1.20 J/cm2 | 5.71 ft-lb/in2 | DAM; ISO 179/1eA |
| 1.80 J/cm2 | 8.57 ft-lb/in2 | 50%RH; ISO 179/1eA | |
| 0.400 J/cm2 @Temperature -40.0 °C |
1.90 ft-lb/in2 @Temperature -40.0 °F |
DAM; ISO 179/1eA | |
| 0.400 J/cm2 @Temperature -40.0 °C |
1.90 ft-lb/in2 @Temperature -40.0 °F |
50%RH; ISO 179/1eA | |
| 0.600 J/cm2 @Temperature -30.0 °C |
2.86 ft-lb/in2 @Temperature -22.0 °F |
DAM; ISO 179/1eA | |
| 0.600 J/cm2 @Temperature -30.0 °C |
2.86 ft-lb/in2 @Temperature -22.0 °F |
50%RH; ISO 179/1eA |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试 |
|---|---|---|---|
| 相比耐漏电起痕指数(CTI) | 580 V | 580 V | DAM; IEC 60112 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试 |
|---|---|---|---|
| 线形热膨胀系数 - 流动 | 50.0 μm/m-°C | 27.8 μin/in-°F | DAM; ISO 11359-1/-2 |
| 线性热膨胀系数,横向流动 | 118 μm/m-°C | 65.6 μin/in-°F | DAM; ISO 11359-1/-2 |
| 熔融温度 | 263 °C | 505 °F | DAM; 10°C/min; ISO 11357-1/-3 |
| 载荷下热变形温度(0.46 MPa) | 246 °C | 475 °F | DAM; ISO 75-1/-2 |
| 载荷下热变形温度(1.8 MPa) | 195 °C | 383 °F | DAM; ISO 75-1/-2 |
| 可燃性(UL94) | HB @Thickness 1.50 mm |
HB @Thickness 0.0591 in |
DAM; IEC 60695-11-10 |
| HB @Thickness 0.800 mm |
HB @Thickness 0.0315 in |
DAM; IEC 60695-11-10 | |
| 极限氧指数 | 21 % | 21 % | DAM; ISO 4589-1/-2 |
| 材料描述 | 测试 | |
|---|---|---|
| Additives | Release agent | |
| Delivery Form | Pellets | |
| 部件标识代码 | PA66-IGF14 | ISO 11469 |
| 加工 | Injection Moulding | |
| 供货地区 | North America | |
| South and Central America | ||
| 树脂识别 | PA66-IGF14 | |
| 特殊特性 | Heat stabilised or stable to heat | |
| UL recognition | UL | DAM |
高创塑胶供应:PP，PE，PVC，ABS，PC，PC/ABS，PA6，PA66，,PA6T，PA9T，PAMXD6，IXEF，PA11，PA12，PBT，PET，PPS，LCP，PEI,PPSU，PSU，PVDF，PEEK，TPU，TPV，TPE，食品级降解塑料（PBAT，PLA，PBS，PBST）等。免费提供原料：物性表，UL黄卡，随货同行(提供)SGS,MSDS,FDA,LFGB,USP,COA,PFOS,REACH, ROSH/SONY等资料。
