Physical PropertiesMetricEnglishCommentsMechanical PropertiesMetricEnglishCommentsThermal PropertiesMetricEnglishComments

Specific Gravity	1.06g/cc	1.06g/cc	ASTM D 792
Density	1.09g/cc	0.0394lb/in3	ISO 1183
Moisture Absorption	0.200 % @Temperature 23.0 °C	0.200 % @Temperature 73.4 °F	50% RH; ISO 62
Water Absorption at Saturation	0.55 % @Temperature 23.0 °C	0.55 % @Temperature 73.4 °F	ISO 62
Linear Mold Shrinkage, Flow	0.0050-0.0070cm/cm @Thickness 3.20 mm	0.0050-0.0070in/in @Thickness 0.126 in	SABIC Method
Linear Mold Shrinkage, Transverse	0.0050-0.0070cm/cm @Thickness 3.20 mm	0.0050-0.0070in/in @Thickness 0.126 in	SABIC Method
Melt Flow	7.0g/10 min @Load 10.0 kg, Temperature 220 °C	7.0g/10 min @Load 22.0 lb, Temperature 428 °F	cm^3/10 min Melt Volume Rate; ISO 1133
	7.0g/10 min @Load 10.0 kg, Temperature 220 °C	7.0g/10 min @Load 22.0 lb, Temperature 428 °F	ASTM D 1238
	8.0g/10 min @Load 5.00 kg, Temperature 260 °C	8.0g/10 min @Load 11.0 lb, Temperature 500 °F	cm^3/10 min Melt Volume Rate; ISO 1133
Hardness, Rockwell R	95	95	ISO 2039-2
Tensile Strength at Break	30.0MPa	4350psi	50 mm/min; ISO 527
	30.0MPa	4350psi	Type I, 50 mm/min; ASTM D 638
Tensile Strength, Yield	38.0MPa	5510psi	50 mm/min; ISO 527
	38.0MPa	5510psi	Type I, 50 mm/min; ASTM D 638
Elongation at Break	4.0 %	4.0 %	50 mm/min; ISO 527
	4.0 %	4.0 %	Type I, 50 mm/min; ASTM D 638
Elongation at Yield	2.5 %	2.5 %	50 mm/min; ISO 527
	2.5 %	2.5 %	Type I, 50 mm/min; ASTM D 638
Tensile Modulus	1.79GPa	260ksi	5 mm/min; ASTM D 638
	1.90GPa	276ksi	1 mm/min; ISO 527
Flexural Yield Strength	50.0MPa	7250psi	2 mm/min; ISO 178
	55.0MPa	7980psi	1.3 mm/min, 50 mm span; ASTM D 790
Flexural Modulus	1.79GPa	260ksi	1.3 mm/min, 50 mm span; ASTM D 790
	1.90GPa	276ksi	2 mm/min; ISO 178
Izod Impact, Notched	0.560J/cm @Temperature -30.0 °C	1.05ft-lb/in @Temperature -22.0 °F	ASTM D 256
	1.34J/cm @Temperature 23.0 °C	2.51ft-lb/in @Temperature 73.4 °F	ASTM D 256
Izod Impact, Notched (ISO)	5.00kJ/m2 @Temperature -30.0 °C	2.38ft-lb/in2 @Temperature -22.0 °F	80*10*4; ISO 180/1A
	12.0kJ/m2 @Temperature 23.0 °C	5.71ft-lb/in2 @Temperature 73.4 °F	80*10*4; ISO 180/1A
Charpy Impact, Notched	0.400J/cm2 @Temperature -30.0 °C	1.90ft-lb/in2 @Temperature -22.0 °F	V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA
	1.20J/cm2 @Temperature 23.0 °C	5.71ft-lb/in2 @Temperature 73.4 °F	V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA
Impact Test	17.0J @Temperature 23.0 °C	12.5ft-lb @Temperature 73.4 °F	Instrumented Impact Total Energy; ASTM D 3763
CTE, linear, Parallel to Flow	86.4μm/m-°C @Temperature -40.0 - 40.0 °C	48.0μin/in-°F @Temperature -40.0 - 104 °F	ASTM E 831
	90.0μm/m-°C @Temperature 23.0 - 60.0 °C	50.0μin/in-°F @Temperature 73.4 - 140 °F	ISO 11359-2
CTE, linear, Transverse to Flow	91.8μm/m-°C @Temperature -40.0 - 40.0 °C	51.0μin/in-°F @Temperature -40.0 - 104 °F	ASTM E 831
	100μm/m-°C @Temperature 23.0 - 60.0 °C	55.6μin/in-°F @Temperature 73.4 - 140 °F	ISO 11359-2
Hot Ball Pressure Test	75.0°C	167°F	Pass; IEC 60695-10-2
Deflection Temperature at 0.46 MPa (66 psi)	88.0°C	190°F	Edgew 120*10*4 sp=100mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi)	75.0°C	167°F	Edgew 120*10*4 sp=100mm; ISO 75/Ae
	77.0°C @Thickness 3.20 mm	171°F @Thickness 0.126 in	unannealed; ASTM D 648
Vicat Softening Point	86.0°C	187°F	Rate B/50; ISO 306
	91.0°C	196°F	Rate B/120; ISO 306
	99.0°C	210°F	Rate B/50; ASTM D 1525