上海亿骋塑胶科技有限公司
PEI/Resin 1010 - Europe/SABIC 物性表
PEI/Resin 1010 - Europe/SABIC
规格用途
| 规格级别 | |
| 外观颜色 | |
| 该料用途 | Automotive Lighting; Lighting Applications; Rail A... |
| 备注说明 | ULTEM 1010 resin is an amorphous, transparent polyetherimide (PEI) plastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. This inherently flame retarant resin has UL94 V0 and 5VA ratings. ULTEM 1010 resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 注射 | 干燥温度 | 150 | °C | ||
| 干燥时间 | 4.0 到 6.0 | hr | |||
| 建议的最大水分含量 | 0.020 | % | |||
| 料斗温度 | 80 到 120 | °C | |||
| 料筒后部温度 | 340 到 395 | °C | |||
| 料筒中部温度 | 350 到 405 | °C | |||
| 料筒前部温度 | 360 到 415 | °C | |||
| 射嘴温度 | 350 到 405 | °C | |||
| 加工（熔体）温度 | 370 到 410 | °C | |||
| 模具温度 | 140 到 180 | °C |
