东莞市常平浩云塑胶经营部
THERMOLAST A TA4AON TPE
THERMOLAST A TA4AOZ TPE
THERMOLAST A TA5AON KRAIBURG TPE
THERMOLAST A TA5AOZ TPE
THERMOLAST A TA6AON TPE
THERMOLAST A TA6AOZ TPE
THERMOLAST A TA7AON TPE
THERMOLAST A TA7AOZ TPE
THERMOLAST A TA8AON TPE
THERMOLAST A TA8AOZ TPE
THERMOLAST K HTC0459/70 TPE
THERMOLAST K HTC0459/71 TPE
THERMOLAST K HTC8715/55 TPE
THERMOLAST K HTC9371/67 TPE
THERMOLAST K HTF8586/58 TPE
THERMOLAST K HTF8586/59 TPE
THERMOLAST K HTF8586/62 TPE
THERMOLAST K HTO8402/68 TPE
THERMOLAST K STC8677/0 TPE
THERMOLAST K STC8677/05 KRAIBURG TPE
THERMOLAST K TA5AAA TPE
THERMOLAST K TA5FAA TPE
THERMOLAST K TA6AAA TPE
THERMOLAST K TA6AAD TPE
THERMOLAST K TA6FAA TPE
THERMOLAST K TA6PAA TPE
THERMOLAST K TA6TAA TPE
THERMOLAST K TA7AAA TPE
THERMOLAST K TA7AAD TPE
THERMOLAST K TA7FAA TPE
THERMOLAST K TA7PAA TPE
THERMOLAST K TA8AAC TPE
THERMOLAST K TA8HAI TPE
THERMOLAST K TA8TAA TPE
THERMOLAST K TC0COZ TPE
THERMOLAST K TC2PAZ TPE
THERMOLAST K TC2YNA TPE
THERMOLAST K TC3AAZ TPE
THERMOLAST K TC3CHT TPE
THERMOLAST K TC3CSN TPE
THERMOLAST K TC3CSZ TPE
THERMOLAST K TC3HTT TPE
THERMOLAST K TC3MSB TPE
THERMOLAST K TC3MSZ TPE
THERMOLAST K TC3PAZ TPE
THERMOLAST K TC3YCA TPE
THERMOLAST K TC3YCZ TPE
THERMOLAST K TC3YNA TPE
THERMOLAST K TC3YNZ TPE
THERMOLAST K TC4AAE TPE
THERMOLAST K TC4ABZ TPE
THERMOLAST K TC4CHT TPE
THERMOLAST K TC4CSN TPE
THERMOLAST K TC4CSZ TPE
THERMOLAST K TC4FAR TPE
THERMOLAST K TC4FRN TPE
THERMOLAST K TC4FRZ TPE
THERMOLAST K TC4HAA TPE
THERMOLAST K TC4HAZ TPE
THERMOLAST K TC4HTT TPE
THERMOLAST K TC4MGA TPE
THERMOLAST K TC4MGZ TPE
THERMOLAST K TC4MSB TPE
THERMOLAST K TC4MSZ TPE
THERMOLAST K TC4PAN TPE
THERMOLAST K TC4PAZ TPE
THERMOLAST K TC4YCA TPE
THERMOLAST K TC4YCZ TPE
THERMOLAST K TC4YNA TPE
THERMOLAST K TC4YNZ TPE
THERMOLAST K TC5AAF TPE
THERMOLAST K TC5AEZ TPE
THERMOLAST K TC5AMA TPE
THERMOLAST K TC5CHT TPE
THERMOLAST K TC5CSN TPE
THERMOLAST K TC5CSZ TPE
THERMOLAST K TC5FRN TPE
THERMOLAST K TC5FRZ TPE
THERMOLAST K TC5HAA TPE
THERMOLAST K TC5HAZ TPE
THERMOLAST K TC5HTT TPE
THERMOLAST K TC5MGA TPE
THERMOLAST K TC5MNO TPE
THERMOLAST K TC5MGZ TPE
THERMOLAST K TC5PAN TPE
THERMOLAST K TC5PAZ TPE
THERMOLAST K TC5YCA TPE
THERMOLAST K TC5YCZ TPE
THERMOLAST K TC5YNA TPE
THERMOLAST K TC5YNZ TPE
THERMOLAST K TC6ABZ TPE
THERMOLAST K TC6CAA TPE
THERMOLAST K TC6CHT TPE
THERMOLAST K TC6CSN TPE
THERMOLAST K TC6CSZ TPE
THERMOLAST K TC6FRA TPE
THERMOLAST K TC6FRN TPE
THERMOLAST K TC6FRZ TPE
THERMOLAST K TC6HAA TPE
THERMOLAST K TC6HAZ TPE
THERMOLAST K TC6HBA TPE
THERMOLAST K TC6HBZ TPE
THERMOLAST K TC6HTT TPE
THERMOLAST K TC6MGA TPE
THERMOLAST K TC6MGZ TPE
THERMOLAST K TC6MLZ TPE
THERMOLAST K TC6PAN TPE
THERMOLAST K TC6PAZ TPE
THERMOLAST K TC6YBA TPE
THERMOLAST K TC6YBZ TPE
THERMOLAST K TC6YCA TPE
THERMOLAST K TC6YCZ TPE
THERMOLAST K TC6YNA TPE
THERMOLAST K TC6YNZ TPE
温馨提示;因塑料行情波动频繁,网页上的报价会与当天实际报价有差异,
Kraiburg TPE THERMOLAST K TC5AAF Natural Sealing TPE
Polymer,Thermoplastic,Elastomer, TPE,Styrenic TPE
Kraiburg TPE
产品说明:
- Natural compound for sealing applications
- Seals under static and dynamic load
Typical Applications:
- Applications in automotive and electric industries with high requirements to compression set (e.g. sealing in junction, electronic boxes and connectors, automotive air drag sealing
Material Advantages:
- Good sealing properties to ensure IP 65 or higher
- Adhesion to PP
- High service temperature
- Easy to color
Processing:
- Like polyolefins
- High injection speed and pressure
- No predrying
- Easy demolding
Information provided by Kraiburg TPE.
Kraiburg TPE THERMOLAST K TC5AAF Natural Sealing TPE 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.16 g/cc | 0.0419 lb/in3 | DIN 53479 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 肖氏硬度 (邵氏 A) | 45 | 45 | DIN 53505 |
| 抗张强度(断裂) | 7.00 MPa | 1020 psi | DIN 53504 |
| 伸长率 (断裂) | 400 % | 400 % | DIN 53504 |
| 撕裂强度 | 15.0 kN/m | 85.6 pli | DIN 53515 |
| 永久压缩 | 10 % | 10 % | 72 hours at 23°C; ISO 815 |
| 18 %
@Temperature 70.0 °C
|
18 %
@Temperature 158 °F
|
24 hours; ISO 815 | |
| 32 %
@Temperature 100 °C
|
32 %
@Temperature 212 °F
|
24 hours; ISO 815 |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工温度 | 180 - 220 °C | 356 - 428 °F |
| 材料描述 | 测试方法 | |
|---|---|---|
| 颜色 | Natural |
