东莞市常平浩云塑胶经营部
THERMOLAST A TA4AON TPE
THERMOLAST A TA4AOZ TPE
THERMOLAST A TA5AON KRAIBURG TPE
THERMOLAST A TA5AOZ TPE
THERMOLAST A TA6AON TPE
THERMOLAST A TA6AOZ TPE
THERMOLAST A TA7AON TPE
THERMOLAST A TA7AOZ TPE
THERMOLAST A TA8AON TPE
THERMOLAST A TA8AOZ TPE
THERMOLAST K HTC0459/70 TPE
THERMOLAST K HTC0459/71 TPE
THERMOLAST K HTC8715/55 TPE
THERMOLAST K HTC9371/67 TPE
THERMOLAST K HTF8586/58 TPE
THERMOLAST K HTF8586/59 TPE
THERMOLAST K HTF8586/62 TPE
THERMOLAST K HTO8402/68 TPE
THERMOLAST K STC8677/0 TPE
THERMOLAST K STC8677/05 KRAIBURG TPE
THERMOLAST K TA5AAA TPE
THERMOLAST K TA5FAA TPE
THERMOLAST K TA6AAA TPE
THERMOLAST K TA6AAD TPE
THERMOLAST K TA6FAA TPE
THERMOLAST K TA6PAA TPE
THERMOLAST K TA6TAA TPE
THERMOLAST K TA7AAA TPE
THERMOLAST K TA7AAD TPE
THERMOLAST K TA7FAA TPE
THERMOLAST K TA7PAA TPE
THERMOLAST K TA8AAC TPE
THERMOLAST K TA8HAI TPE
THERMOLAST K TA8TAA TPE
THERMOLAST K TC0COZ TPE
THERMOLAST K TC2PAZ TPE
THERMOLAST K TC2YNA TPE
THERMOLAST K TC3AAZ TPE
THERMOLAST K TC3CHT TPE
THERMOLAST K TC3CSN TPE
THERMOLAST K TC3CSZ TPE
THERMOLAST K TC3HTT TPE
THERMOLAST K TC3MSB TPE
THERMOLAST K TC3MSZ TPE
THERMOLAST K TC3PAZ TPE
THERMOLAST K TC3YCA TPE
THERMOLAST K TC3YCZ TPE
THERMOLAST K TC3YNA TPE
THERMOLAST K TC3YNZ TPE
THERMOLAST K TC4AAE TPE
THERMOLAST K TC4ABZ TPE
THERMOLAST K TC4CHT TPE
THERMOLAST K TC4CSN TPE
THERMOLAST K TC4CSZ TPE
THERMOLAST K TC4FAR TPE
THERMOLAST K TC4FRN TPE
THERMOLAST K TC4FRZ TPE
THERMOLAST K TC4HAA TPE
THERMOLAST K TC4HAZ TPE
THERMOLAST K TC4HTT TPE
THERMOLAST K TC4MGA TPE
THERMOLAST K TC4MGZ TPE
THERMOLAST K TC4MSB TPE
THERMOLAST K TC4MSZ TPE
THERMOLAST K TC4PAN TPE
THERMOLAST K TC4PAZ TPE
THERMOLAST K TC4YCA TPE
THERMOLAST K TC4YCZ TPE
THERMOLAST K TC4YNA TPE
THERMOLAST K TC4YNZ TPE
THERMOLAST K TC5AAF TPE
THERMOLAST K TC5AEZ TPE
THERMOLAST K TC5AMA TPE
THERMOLAST K TC5CHT TPE
THERMOLAST K TC5CSN TPE
THERMOLAST K TC5CSZ TPE
THERMOLAST K TC5FRN TPE
THERMOLAST K TC5FRZ TPE
THERMOLAST K TC5HAA TPE
THERMOLAST K TC5HAZ TPE
THERMOLAST K TC5HTT TPE
THERMOLAST K TC5MGA TPE
THERMOLAST K TC5MNO TPE
THERMOLAST K TC5MGZ TPE
THERMOLAST K TC5PAN TPE
THERMOLAST K TC5PAZ TPE
THERMOLAST K TC5YCA TPE
THERMOLAST K TC5YCZ TPE
THERMOLAST K TC5YNA TPE
THERMOLAST K TC5YNZ TPE
THERMOLAST K TC6ABZ TPE
THERMOLAST K TC6CAA TPE
THERMOLAST K TC6CHT TPE
THERMOLAST K TC6CSN TPE
THERMOLAST K TC6CSZ TPE
THERMOLAST K TC6FRA TPE
THERMOLAST K TC6FRN TPE
THERMOLAST K TC6FRZ TPE
THERMOLAST K TC6HAA TPE
THERMOLAST K TC6HAZ TPE
THERMOLAST K TC6HBA TPE
THERMOLAST K TC6HBZ TPE
THERMOLAST K TC6HTT TPE
THERMOLAST K TC6MGA TPE
THERMOLAST K TC6MGZ TPE
THERMOLAST K TC6MLZ TPE
THERMOLAST K TC6PAN TPE
THERMOLAST K TC6PAZ TPE
THERMOLAST K TC6YBA TPE
THERMOLAST K TC6YBZ TPE
THERMOLAST K TC6YCA TPE
THERMOLAST K TC6YCZ TPE
THERMOLAST K TC6YNA TPE
THERMOLAST K TC6YNZ TPE
温馨提示;因塑料行情波动频繁,网页上的报价会与当天实际报价有差异,
THERMOLAST K TC4CSN (Series: CS)
热塑性弹性体
KRAIBURG TPE
产品说明：
The CS Series is your material solution for sealing applications, providing an excellent compression set. The compounds are available in natural and black colors.
Typical applications
Material advantages
Typical applications
- Fastenings
- Grommets
- Membranes
- Seals
Material advantages
- Adhesion to PP
- Easy coloring (compounds in natural colors)
- Excellent compression set
- Excellent heat stability
THERMOLAST K TC4CSN (Series: CS) 物性表
| 基本信息 | |
|---|---|
| 特性 |
|
| 用途 |
|
| 外观 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 1.10 | g/cm3 | ISO 1183 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 肖氏硬度(邵氏 A) | 38 | ISO 7619 |
| 弹性体 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 拉伸应力1(屈服) | 5.00 | MPa | ISO 37 |
| 伸长率2(断裂) | 550 | % | ISO 37 |
| 撕裂强度3 | 10 | kN/m | ISO 34-1 |
| 压缩永久变形4 | ISO 815 | ||
| 23°C, 72 hr | 9.0 | % | ISO 815 |
| 70°C, 24 hr | 17 | % | ISO 815 |
| 100°C, 24 hr | 34 | % | ISO 815 |
| 120°C, 24 hr | 50 | % | ISO 815 |
| 挤出 | 额定值 | 单位制 | |
|---|---|---|---|
| 干燥温度 | 60.0 到 80.0 | °C | |
| 干燥时间 | 2.0 到 4.0 | hr | |
| 料筒1区温度 | 160 | °C | |
| 料筒2区温度 | 180 | °C | |
| 料筒3区温度 | 200 | °C | |
| 口模温度 | 200 到 230 | °C |
| 备注 | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | B 方法，直角形试样（割口） |
| 4 . | Method A |
