深圳市国华电气有限公司
标题:艾默生PLC IC695CPU310处理器 重庆批发|艾默生PLC重庆代理商|艾默生PLC重庆厂家|深圳市国华电气有限公司
IC694CBL030 | 3.0 meter Cable between IC694TBC032 and IC694RTB032 |
IC694CBL130 | 3 meter Cable with IC694TBC032 connector on one end and open wire on other end |
IC694CEE001 | RX3i CEP EXPANSION CARRIER |
IC694CHS392 | Base Expansion 10 Slots |
IC694CHS392CA | Conformal Coated 10 slot I/O expansion base. |
IC694CHS398 | Base Expansion 5 Slots |
IC694CHS398CA | Conformal Coated 5 slot expansion base. |
IC694DNM200 | DeviceNet Master Module for RX3i. Module can only be located in the CPUbase. The module is on the high speed serial bus. |
IC694DSM314 | MOTION CONTROLLERMODULE 1-2 axis Digital Servo or 1-4 Axis Analog Servo |
IC694DSM324 | DSM324 motion controller module for the RX3i |
IC694MDL230 | Input module, 120 VAC 8 point, isolated per point. |
IC694MDL230CA | Conformal Coated Input module, 120VAC 8 point isolated. |
IC694MDL231 | Input module, 240 VAC 8 point, isolated per point. |
IC694MDL240 | Input module 120 VAC, 16 points. |
IC694MDL240CA | Conformal Coated Input module 120 VAC 16 point |
IC694MDL241 | Input module 24 VAC, 16 points. |
IC694MDL241CA | Conformal Coated Input 24 VAC 16 points. |
IC694MDL250 | 120 Vac Isolated Input (16 points). Module requires a terminal block IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard expansion base. Requires firmware 3.5 and ME |
IC694MDL260 | Input module 120 VAC, 32 points. Module requires a terminal block IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard expansion base. Requires firmware 3.5 and above |
IC694MDL310 | Output module, 120 VAC 0.5 amps 12 points. |
IC694MDL330 | Output module 120/240 VAC 2amps 8 Points. |
IC694MDL340 | Output module 120 VAC 0.5 amps 16 Points. |
IC694MDL340CA | Conformal Coated 120/240 Output module, 0.5A,16 points |
IC694MDL350 | 120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal block (IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard. Requires firmware 3.5 and ME 5.5 |
IC694MDL390 | Output module 120/240VAC 2 amps 5 point isolated. |
IC694MDL390CA | Conformal Coated OUTPUT module 120/240 VAC 2A 5 point, isolated per point |
IC694MDL632 | Input module 125 VDC 8 point POS/NEG logic. |