东莞市常平浩云塑胶经营部
Lustran ABS 1146 ABS
Lustran ABS 1152 ABS
Lustran ABS 130 ABS
Lustran ABS 150G10 ABS
Lustran ABS 150G22 ABS
Lustran ABS 240 ABS
Lustran ABS 241 ABS
Lustran ABS 248 ABS
Lustran ABS 248FC ABS
Lustran ABS 250 ABS
Lustran ABS 256 ABS
Lustran ABS 261 ABS
Lustran ABS 266 ABS
Lustran ABS 288 ABS
Lustran ABS 308 ABS
Lustran ABS 348 ABS
Lustran ABS 349 ABS
Lustran ABS 377 ABS
Lustran ABS 427 ABS
Lustran ABS 433 ABS
Lustran ABS 440 ABS
Lustran ABS 446 ABS
Lustran ABS 448 ABS
Lustran ABS 450 ABS
Lustran ABS 451 ABS
Lustran ABS 488 ABS
Lustran ABS 552 ABS
Lustran ABS 556 ABS
Lustran ABS 595CP ABS
Lustran ABS 633 ABS
Lustran ABS 648 ABS
Lustran ABS 650 ABS
Lustran ABS 680 LNS503 ABS
Lustran ABS 682 INEOS ABS
Lustran ABS 720 INEOS ABS
Lustran ABS 750 INEOS ABS
Lustran ABS 752 INEOS ABS
Lustran ABS 786 INEOS ABS
Lustran ABS 970 INEOS ABS
Lustran ABS E112LG ABS
Lustran ABS E211 LNS013 ABS
Lustran ABS E401 ABS
Lustran ABS Guardian 620 ABS
Lustran ABS Guardian 732 ABS
Lustran ABS H604 ABS
Lustran ABS H605 ABS
Lustran ABS H606LS ABS
Lustran ABS H607AS ABS
Lustran ABS H701 ABS
Lustran ABS H702 ABS
Lustran ABS H801 ABS
Lustran ABS H802 ABS
Lustran ABS H950 ABS
Lustran ABS LGA ABS
Lustran ABS LGM ABS
Lustran ABS LK197 ABS
Lustran ABS M201AS ABS
Lustran ABS M202AS ABS
Lustran ABS M203FC ABS
Lustran ABS M205FC ABS
Lustran ABS M210TF ABS
Lustran ABS M305 ABS
Lustran ABS M406 ABS
Lustran ABS PG 298 ABS
Lustran Elite HH 1827 ABS
Lustran Elite HH 1891 ABS
Lustran Ultra 4000 PG ABS
Ineos ABS Lustran 130
Polymer,Thermoplastic,ABS Polymer,Acrylonitrile Butadiene Styrene (ABS), Impact Grade, Molded
Ineos ABS
产品说明:
Key Features:
- Unfilled
- High impact or high impact modified
Suitable processing methods:
- Injection molding
- Sheet extrusion
- Blow molding
- Thermoforming
Ineos ABS Lustran 130 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.05 g/cc | 0.0379 lb/in3 | |
| 熔体流动速率 | 3.5 g/10 min
@Load 10.0 kg, Temperature 220 °C
|
3.5 g/10 min
@Load 22.0 lb, Temperature 428 °F
|
cm3/10 min. |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(屈服) | 35.1 MPa | 5090 psi | |
| 伸长率 (断裂) | 29 % | 29 % | Nominal |
| 屈服伸长率 | 3.3 % | 3.3 % | |
| 拉伸模量 | 2.14 GPa | 310 ksi | |
| 简支梁缺口冲击强度 | 3.80 J/cm2 | 18.1 ft-lb/in2 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线形热膨胀系数 - 流动 | 94.0 μm/m-°C
@Temperature 20.0 °C
|
52.2 μin/in-°F
@Temperature 68.0 °F
|
|
| 载荷下热变形温度(0.46 MPa) | 94.0 °C | 201 °F | |
| 载荷下热变形温度(1.8 MPa) | 84.0 °C | 183 °F | |
| 可燃性(UL94) | HB
@Thickness 1.50 mm
|
HB
@Thickness 0.0591 in
|
UL Recognized |
| HB
@Thickness 3.00 mm
|
HB
@Thickness 0.118 in
|
UL Recognized |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工（熔体）温度 | 250 °C | 482 °F | Injection Molding |
| 模具温度 | 60.0 °C | 140 °F | Injection Molding |
| 射速 | 200 mm/sec | 7.87 in/sec | |
| 注射压力 | 55.0 MPa | 7980 psi |
