东莞市常平浩云塑胶经营部
CYCOLAC BDT5510 ABS
CYCOLAC BDT6500 ABS
CYCOLAC CRT3370 ABS
CYCOLAC CRT3370F ABS
CYCOLAC DL100 ABS
CYCOLAC DL100LG ABS
CYCOLAC EXABS01 ABS
CYCOLAC FR15 ABS
CYCOLAC FR15 ABS
CYCOLAC FR15U ABS
CYCOLAC FR15U ABS
CYCOLAC FR23 ABS
CYCOLAC FR23 ABS
CYCOLAC FR30U ABS
CYCOLAC FR30U ABS
CYCOLAC FXS600AR ABS
CYCOLAC FXS610SK ABS
CYCOLAC G151 ABS
CYCOLAC G320 ABS
CYCOLAC G360 ABS
CYCOLAC G366 ABS
CYCOLAC GHT3330 ABS
CYCOLAC GPM5500 ABS
CYCOLAC GPM5500F ABS
CYCOLAC GPM5500S ABS
CYCOLAC GPM5500U ABS
CYCOLAC GX3800F ABS
CYCOLAC HMG47MD ABS
CYCOLAC HMG94MD ABS
CYCOLAC INP108 ABS
CYCOLAC INP222 ABS
CYCOLAC INP338T ABS
CYCOLAC INP362 ABS
CYCOLAC INP562 ABS
CYCOLAC INP563 ABS
CYCOLAC INP564 ABS
CYCOLAC INP572 ABS
CYCOLAC INP576 ABS
CYCOLAC INP581 ABS
CYCOLAC INP630 ABS
CYCOLAC INP703 ABS
CYCOLAC INPBMAT ABS
CYCOLAC MG29 ABS
CYCOLAC MG29 ABS
CYCOLAC MG34LG ABS
CYCOLAC MG34LGHF ABS
CYCOLAC MG37CR ABS
CYCOLAC MG37CR ABS
CYCOLAC MG37EPX ABS
CYCOLAC MG38 ABS
CYCOLAC MG38F ABS
CYCOLAC MG38F ABS
CYCOLAC MG38N ABS
CYCOLAC MG38N ABS
CYCOLAC MG47 ABS
CYCOLAC MG47 ABS
CYCOLAC MG47N ABS
CYCOLAC MG47N ABS
CYCOLAC MG8000SR ABS
CYCOLAC MG8000SR ABS
CYCOLAC MG8000SR ABS
CYCOLAC MG94 ABS
CYCOLAC MG94 ABS
CYCOLAC MG94U ABS
CYCOLAC S157 ABS
CYCOLAC S701 ABS
CYCOLAC S701S ABS
CYCOLAC S701SU ABS
CYCOLAC S702 ABS
CYCOLAC S702S ABS
CYCOLAC S703T ABS
CYCOLAC S705 ABS
CYCOLAC S708C ABS
CYCOLAC X11 ABS
CYCOLAC X15 ABS
CYCOLAC X17 ABS
CYCOLAC X37 ABS
CYCOLAC X37 ABS
CYCOLAC Z48 ABS
SABIC Innovative Plastics Cycolac X15 ABS
Polymer,Thermoplastic,ABS Polymer,Acrylonitrile Butadiene Styrene (ABS), Heat Resistant, Molded
SABIC Innovative Plastics (GE Plastics)
产品说明:
Automotive. Very high heat resistance with high impact. UL94 HB rated. High gloss.
This data was supplied by SABIC-IP for the Americas region.
SABIC Innovative Plastics Cycolac X15 ABS 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 比重 | 1.05 g/cc | 1.05 g/cc | ASTM D 792 |
| 粘度 | 255000 cP
@Temperature 260 °C
|
255000 cP
@Temperature 500 °F
|
melt; 1000 sec-1; ASTM D 3825 |
| 线性成型收缩率,Flow | 0.0050 - 0.0080 cm/cm
@Thickness 3.20 mm
|
0.0050 - 0.0080 in/in
@Thickness 0.126 in
|
SABIC Method |
| 熔体流动速率 | 1.0 g/10 min
@Load 3.80 kg, Temperature 230 °C
|
1.0 g/10 min
@Load 8.38 lb, Temperature 446 °F
|
ASTM D 1238 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 洛氏硬度（R 级） | 108 | 108 | ASTM D 785 |
| 抗张强度(屈服) | 45.0 MPa | 6530 psi | Type I, 5 mm/min; ASTM D 638 |
| 拉伸模量 | 2.20 GPa | 319 ksi | 5 mm/min; ASTM D 638 |
| 弯曲强度 | 77.0 MPa | 11200 psi | 1.3 mm/min, 50 mm span; ASTM D 790 |
| 弯曲模量 | 2.34 GPa | 339 ksi | 1.3 mm/min, 50 mm span; ASTM D 790 |
| 悬壁梁缺口冲击强度 | 0.850 J/cm
@Temperature -40.0 °C
|
1.59 ft-lb/in
@Temperature -40.0 °F
|
ASTM D 256 |
| 2.67 J/cm
@Temperature 23.0 °C
|
5.00 ft-lb/in
@Temperature 73.4 °F
|
ASTM D 256 |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 耐电弧性 | 60 - 120 sec | 60 - 120 sec | Tungsten, PLC code 6; ASTM D 495 |
| 相比耐漏电起痕指数(CTI) | = 600 V | = 600 V | PLC code 0; UL 746A |
| 热丝引燃 (HWI) | 7.0 - 15 sec | 7.0 - 15 sec | PLC code 4; UL 746A |
| 高电弧燃烧，HAI | = 120 arcs | = 120 arcs | surface, PLC code 0; UL 746A |
| 高压电弧跟踪率，HVTR | 25.4 - 80.0 mm/min | 1.00 - 3.15 in/min | PLC code 2; UL 746A |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 107 °C
@Thickness 3.20 mm
|
225 °F
@Thickness 0.126 in
|
unannealed; ASTM D 648 |
| 110 °C
@Thickness 6.40 mm
|
230 °F
@Thickness 0.252 in
|
unannealed; ASTM D 648 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 94.0 °C
@Thickness 3.20 mm
|
201 °F
@Thickness 0.126 in
|
unannealed; ASTM D 648 |
| 100 °C
@Thickness 6.40 mm
|
212 °F
@Thickness 0.252 in
|
unannealed; ASTM D 648 | |
| UL RTI | 60.0 °C | 140 °F | UL 746B |
| UL RTI，机械冲击 | 60.0 °C | 140 °F | UL 746B |
| UL RTI，机械无冲击 | 60.0 °C | 140 °F | UL 746B |
| 可燃性(UL94) | HB
@Thickness 1.47 mm
|
HB
@Thickness 0.0579 in
|
UL 94 |
