耐光性ABS|台湾奇美PA-764B|阻燃级

ABS台湾奇美PA-777B耐热性、高冲击强度。

ABS/台湾奇美/PA-777D 规格：耐热级

ABS台湾奇美PA-777D PA-777E超耐热性、中冲击强度

ABS台湾奇美PA-756 PA-756H高流动性、高刚性、高光泽性。

ABS台湾奇美PA-756H超高流动性、高刚性、高光泽性。

ABS台湾奇美PA-756S超高流动性、中冲击强度。

ABS台湾奇美PA-757高刚性、高光泽性、中冲击强度 通用级。

ABS台湾奇美PA-758高透明性。

ABS台湾奇美PA-764B耐光性，耐热性 防火级UL94 1/10” V-0，1/8”5VA。

ABS台湾奇美PA-765 PA-765A 高流动性 阻燃级UL94 1/16” V-0，1/10”5V。

ABS台湾奇美PA-765B耐冲击强度 防火级UL94 1/16” V-0，1/8”5VA。

ABS台湾奇美PA-766难燃、耐热、高冲击 防火级。

ABS注塑工艺

注塑。ABS是常用的工程塑料，广泛应用于制造齿轮、轴承、把手、泵叶轮、电视机、计算机、打字机壳体、键盘、电器仪表、储电池槽、冰箱部件等及机械工业部件、各种日用品、消费品包装等制品。ABS注塑成型温度160~220℃之间，注射压力在70~130Mpa之间，模具温度为55~75℃。

ABS树脂是目前产量，应用最广泛的聚合物，它将PS，SAN，BS的各种性能有机地统一起来，兼具韧，硬，刚相均衡的优良力学性能

ABS是丙烯腈、丁二烯和苯乙烯的三元共聚物，A代表丙烯腈，B代表丁二烯，S代表苯乙烯。

Huayun plastic company ABS Resin is acrylic nitrile (ACR) , 1,3-Butadiene (Butadiene) , Styrene (Styrene) three monomer graft copolymer. Its molecular formula can be written as (C8H8) x (C4H6) Y (C3H3N) Z, but in fact it is often a mixture of graft copolymer containing butadiene and acrylonitrile-styrene Copolymer, in which acrylonitrile is 15% ~ 35% , butadiene is 5% ~ 30% , styrene is 40% ~ 60% , the most common ratio is a: B: s = 20:30:50, at this time the melting point of ABS Resin is 175 °C. 1, comprehensive performance is good, impact strength is high, chemical stability, electrical performance is good; 2, with 372 plexiglass fusion of good, made of two-color plastic parts, and can be surface chrome plating, spray paint treatment; 3, have high impact resistance, high heat resistance, flame retardant, enhancement, transparency and so on; 4, mobility than HIPS slightly, better than PMMA, PC, good, flexible.