加纤防火PBT台湾长春4115/本色塑胶

加纤防火PBT台湾长春4115/本色塑胶

公司经营的塑胶原料品种齐全、价格合理、实力雄厚、重信用、守合约、保证产品质量，以多品种经营特色和薄利多销的原则，赢得了广大客户的信任。 销售品牌：美国杜邦、陶氏、科腾...日本宝理、东丽、三井...韩国三星、湖南、LG..德国巴斯夫、拜耳、嬴创得固赛..台湾奇美、耐特、南亚...中石化......本公司还可为客户订购全世界各大品牌的偏门材料。 本公司经营的产品都能提供 《ROHS(SGS) 食品认证（FDA) 防火阻燃报告(UL) 产品安全数据表（MSDS)》 符合条件的相关资料证明。

PBT台湾长春3015-2015%玻纤增强，耐热性佳，耐候性，耐化学品

PBT台湾长春3020 M20%玻纤增强，中粘度

PBT台湾长春302020%玻纤增强，中粘度，成型性佳，强度佳

PBT台湾长春3020-10420%玻纤增强，耐磨，耐热稳定

PBT台湾长春3030 M30%玻纤增强，强度坚韧，良好的耐热性，耐磨

PBT台湾长春303030%玻纤增强，强度坚韧，良好的耐热性，耐化学品

PBT台湾长春3030-10430%玻纤增强，强度坚韧，良好的耐热性

PBT台湾长春3030-20130%玻纤增强，强度坚韧，良好的耐热性

PBT台湾长春2000 F流动性佳，阻燃等级V-0

汽车零件、OA器材部品、瓦斯盒零件

PBT台湾长春2000-104D耐磨，耐油性，耐候性

PBT台湾长春2000-201D耐化学品，耐热稳定

PBT台湾长春2100 F成型性良好，阻燃等级V-0

PBT台湾长春4115 F15%玻纤增强，强度大，易成型，阻燃V-0

连接器、冷却风扇、插座、线圈轴、汽机车零件、开关、电视机零件、整流器

PBT台湾长春4115-104D15%玻纤增强，强度大，易成型，阻燃V-0，耐磨

PBT LONGLITE 塑胶原料简介聚对苯二甲酸丁二醇酯，英文名polybutylece terephthalate（简称PBT），属于聚酯系列，是由1.4-丁二醇(1.4-Butylene glycol)与对苯二甲酸(PTA)或者对苯二甲酸酯(DMT)聚缩合而成，并经由混炼程序制成的乳白色半透明到不透明、结晶型热塑性聚酯树脂。与PET一起统称为热塑性聚酯，或饱和聚酯。

Huayun Plastics company PBT 4115longlite physical and chemical properties of PBT Milky Translucent to opaque, crystalline thermoplastic polyester. With high heat resistance, toughness, fatigue resistance, self-lubrication, low friction coefficient, weather resistance, water absorption rate is only 0.1% , in wet environment still maintain a variety of physical properties (including electrical properties) , electrical insulation, but large volume resistance, dielectric loss. Resistant to hot water, Alkali, acid, oil, but vulnerable to halogenated hydrocarbon erosion, poor resistance to hydrolysis, low temperature crystallization can be rapid, good formability. The disadvantage is the notch impact intensity is low, the molding shrinkage rate is big. Therefore, most of the glass fiber reinforced or inorganic filler modification, its tensile strength, bending strength can be increased by more than one time, thermal deformation temperature is also greatly increased. It can work at 140 °C for a long time. The Longitudinal and transverse shrinkage of glass fiber reinforced products are not consistent, and the products are easy to warp.