东莞市常平浩云塑胶经营部
RheTech Polypropylene GC30P100-00 PP
RheTech Polypropylene GC30P100-01 PP
RheTech Polypropylene GC30P100-01UV PP
RheTech Polypropylene GC30P105-08FA PP
RheTech Polypropylene GC30P200-00 PP
RheTech Polypropylene GC30P200-01 PP
RheTech Polypropylene GC30P200-01BG PP
RheTech Polypropylene GC30P200-01UV PP
RheTech Polypropylene GC30P200-523 PP
RheTech Polypropylene GC30P250-01UVEG PP
RheTech Polypropylene GC40P100-00 PP
RheTech Polypropylene GC40P100-01 PP
RheTech Polypropylene GC40P101-00 PP
RheTech Polypropylene GC43P250-00 PP
RheTech Polypropylene GC43P250-01 PP
RheTech Polypropylene GC43P250-777 PP
RheTech Polypropylene GC8P200-00EG PP
RheTech Polypropylene HP501-00 PP
RheTech Polypropylene HP501-01 PP
RheTech Polypropylene HP505-01 PP
RheTech Polypropylene HP506-01 PP
RheTech Polypropylene HP507-01 PP
RheTech Polypropylene HP508-01UV PP
RheTech Polypropylene HP510-01UV PP
RheTech Polypropylene HP511-00 PP
RheTech Polypropylene HP512-00 PP
RheTech Polypropylene HP512-01UV PP
RheTech Polypropylene HP513-00 PP
RheTech Polypropylene HP513-01UV PP
RheTech Polypropylene HP513-538UV PP
RheTech Polypropylene HP501-00
聚丙烯共聚物
RheTech, Inc.
产品说明：
High Performance, Non-UV Stabilized, Polypropylene Copolymer, Natural.
RheTech Polypropylene HP501-00 物性表
| 基本信息 | |
|---|---|
| 特性 |
|
| 外观 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 比重 | 0.898 | g/cm3 | ASTM D792 |
| 熔流率（熔体流动速率）(230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 肖氏硬度(邵氏 D) | 73 | ASTM D2240 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 抗张强度 | 32.4 | MPa | ASTM D638 |
| 弯曲模量 | 1410 | MPa | ASTM D790 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 悬壁梁缺口冲击强度 | 37 | J/m | ASTM D256 |
| 落锤冲击 | 1.24 | J | ASTM D5420 |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 载荷下热变形温度 | ASTM D648 | ||
| 0.45 MPa, 未退火 | 101 | °C | ASTM D648 |
| 1.8 MPa, 未退火 | 57.8 | °C | ASTM D648 |
| 注射 | 额定值 | 单位制 | |
|---|---|---|---|
| 干燥温度 | 65.6 到 82.2 | °C | |
| 干燥时间 | 1.0 到 2.0 | hr | |
| 建议的最大水分含量 | 0.050 | % | |
| 料筒后部温度 | 188 到 216 | °C | |
| 料筒中部温度 | 193 到 221 | °C | |
| 料筒前部温度 | 199 到 227 | °C | |
| 射嘴温度 | 204 到 216 | °C | |
| 模具温度 | 26.7 到 48.9 | °C | |
| 注塑压力 | 2.76 到 10.3 | MPa | |
| 保压 | 2.07 到 8.27 | MPa | |
| 背压 | 0.345 到 1.03 | MPa |
| 注射说明 |
|---|
| Injection Speed: Variable - Application DependantScrew RPM: Recovery 3 seconds before mold opensCycle Time: Wall Thickness Dependant |
