超高耐热ABS|台湾奇美PA-777E|高抗冲|高光泽

ABS台湾奇美//

简要概述：ABS台湾奇美塑料每种单体都具有不同特性，从形态上看，ABS是非结晶性材料。这就决定了ABS材料的耐低温性、抗冲击性，外观特性，低蠕变性，优异的尺寸稳定性及易加工性等多种特性。且表面硬度高、耐化学性好，同时通过改变上述三种组分的比例，可改变ABS的各种性能，故ABS工程塑料具有广泛用途。合成的ABS有中冲击型、高冲击型、超高冲击型及耐热型四类。由于其具有韧、刚、硬的优点，应用范围已远远超过PS，成为一种***的塑料品种。ABS既可用于普通塑料又可用于工程塑料。

POLYLAC供应ABS台湾奇美PA-747R

POLYLAC供应ABS台湾奇美PA-747S

POLYLAC供应ABS台湾奇美PA-749

POLYLAC供应ABS台湾奇美PA-756H

POLYLAC供应ABS台湾奇美PA-756S

POLYLAC供应ABS台湾奇美PA-757

POLYLAC供应ABS台湾奇美PA-758

POLYLAC供应ABS台湾奇美PA-758R

POLYLAC供应ABS台湾奇美PA-763

POLYLAC供应ABS台湾奇美PA-763A

POLYLAC供应ABS台湾奇美PA-764

ABS台湾奇美//

注塑工艺: 干燥处理：ABS材料具有吸湿性，要求在加工之前进行干燥处理。建议干燥条件为80～90℃下最少干燥2小时。材料温度应保证小于0.1%。 熔化温度：210～280℃；建议温度：245℃。 模具温度：25～70℃。（模具温度将影响塑件光洁度，温度较低则导致光洁度较低）。 ***压力：500～1000bar。 ***速度：中高速度。

POLYLAC供应ABS台湾奇美PA-764B

POLYLAC供应ABS台湾奇美PA-765

POLYLAC供应ABS台湾奇美PA-765A

POLYLAC供应ABS台湾奇美PA-765B

POLYLAC供应ABS台湾奇美PA-777B

POLYLAC供应ABS台湾奇美PA-777D

POLYLAC供应ABS台湾奇美PA-777E

Abs Taiwan Chi Mei / / excellent performance: ABS has excellent mechanical properties, its impact strength is super good, can be used at extremely low temperatures; ABS excellent wear resistance, dimensional stability, and oil resistance, can Be used for medium load and speed bearings. The creep resistance of ABS is larger than PSF AND PC, but smaller than PA and POM. The bending strength and compression strength of ABS are poor in plastic raw materials. The mechanical strength of ABS changes with temperature. ABS is not affected by water, inorganic salts, alkali and many kinds of acids, but it is soluble in ketones, aldehydes and chlorinated hydrocarbons. ABS Weather Resistance is poor, easy to degrade under the action of ultraviolet light; after half a year in the open air, the impact strength is reduced by half.