选择钢衬PE管道厂家定做 钢衬四氟管道 钢衬PO管道 钢衬塑管道 衬塑管道的三大优势：

Three advantages of selecting steel lined PE pipe manufacturers to customize steel lined PTFE pipe, steel lined Po pipe, steel lined plastic pipe and plastic lined pipe:

1、橡胶的性能

衬胶管道内衬胶要根据其使用的环境而定，如果选择的橡胶物理和化学性能与环境不相符就会造成使用寿命大大降低橡胶层脱落等严重后果。

1. Properties of rubber

The rubber lining of rubber lined pipeline shall be determined according to its use environment. If the physical and chemical properties of the selected rubber are inconsistent with the environment, the service life will be greatly reduced and the rubber layer will fall off.

2、橡胶与钢管的粘接强度

非橡胶生产企业器胶浆粘接度不强，会造成衬里层受力不能够很好的分解是，导致局部受力不均，造成了衬胶管道局部快速腐蚀。

2. Adhesive strength between rubber and steel pipe

The poor adhesion of the rubber mortar in non rubber production enterprises will cause the stress of the lining layer to not be well decomposed, resulting in uneven local stress and rapid local corrosion of the rubber lined pipeline.

3、工况条件

使用场所、腐蚀性，温度以及使用强度等都会影响到衬胶管道的使用寿命，因此在选择之初应对衬胶管道做出合理的分析。

3. Operating conditions

The use place, corrosivity, temperature and use strength will affect the service life of the rubber lined pipeline. Therefore, a reasonable analysis should be made for the rubber lined pipeline at the beginning of selection.