四氟管道厂家定做 梓哲衬塑聚乙烯管道厂家定做，是以普通碳素钢管作为基体，内衬化学稳定性优良的热塑性塑料管（常用PE、PO、PVC、PTFE），经冷拉复合或滚塑成型，市场上采用的是滚塑成型。?钢衬塑管道滚塑成型又称旋塑即旋转成型、旋转模塑、旋转铸塑、回转成型等。是先将塑料原料加入模具中，然后模具沿两垂直轴不断旋转并使之加热，使模内的塑料原料在重力和热能的作用下，逐渐均匀地涂布、熔融粘附于模腔的整个表面上，成型为所需要的形状，再经冷却定型、脱模，最后获得制品。从而使得它既有钢管的机械性能，又有塑料管的耐腐蚀，缓结垢，不易生长微生物的特点，是输送酸、碱、盐、有腐蚀性气体等介质的理想管道

Teflon pipes are made to order by Zizhe plastic lined polyethylene pipe manufacturers. It is made to order by ordinary carbon steel pipes as the matrix and lined with thermoplastic pipes (commonly PE, Po, PVC and PTFE) with excellent chemical stability. It is cold drawn composite or rotational molding. Rotational molding is used in the market.? Rotational molding of steel lined plastic pipe is also called rotational molding, that is, rotational molding, rotational casting, rotational molding, etc. Firstly, the plastic raw materials are added into the mold, and then the mold rotates continuously along the two vertical axes and heats it, so that the plastic raw materials in the mold are gradually and evenly coated, melted and adhered to the whole surface of the mold cavity under the action of gravity and heat energy, formed into the required shape, cooled, shaped and demoulded, and finally obtained the product. Therefore, it not only has the mechanical properties of steel pipe, but also has the characteristics of corrosion resistance, scale inhibition and difficult growth of microorganisms of plastic pipe. It is an ideal pipeline for transporting acid, alkali, salt, corrosive gas and other media

四氟管道厂家定做 梓哲衬塑聚乙烯管道厂家定做是乙烯、丙烯和丁烯共聚而成的一种烯烃共聚物。

Teflon pipe manufacturer's custom-made Zizhe plastic lined polyethylene pipe manufacturer's custom-made is an olefin copolymer copolymerized with ethylene, propylene and butene.

中文名

四氟管道 衬塑聚乙烯管道

乙烯、丙烯和丁烯共聚

Chinese name

Teflon lined polyethylene pipe

Copolymerization of ethylene, propylene and butene

介质工作温度

-60℃～110℃

介质工作压力

正压0.6Mpa~2.5Mpa

Medium operating temperature

-60℃～110℃

Medium working pressure

Positive pressure 0.6MPa ~ 2.5MP

衬四氟管道 钢衬四氟管道 衬塑聚乙烯复合管道的4个性能优势

Four performance advantages of PTFE lined steel PTFE lined plastic lined polyethylene composite pipe

1.结构优良Excellent structure

管材的增强骨架钢管与橡胶层使用高性能的粘合剂复合为一个整体，克服了钢管耐压不耐磨,塑料、橡胶耐磨不耐压以及玻璃钢脆抗冲击性能差等缺点，同时具备钢管和耐磨橡胶的共同优点，综合性价比卓越。

The reinforced skeleton steel pipe and rubber layer of the pipe are combined into a whole with high-performance adhesive, which overcomes the shortcomings of pressure resistance of steel pipe, wear resistance of plastic and rubber and poor brittleness and impact resistance of FRP. At the same time, it has the common advantages of steel pipe and wear-resistant rubber, and has excellent comprehensive cost performance.

2.强度高,抗冲击性高High strength and impact resistance

橡胶弹性体的密度低，重量轻，具有较好的吸振性能和优异的耐机械冲击性能，高强度,刚性好,不产生蠕变，抗冲击，抗震,抗水锤性能强，便于运输,安装和维护。

Rubber elastomer has low density, light weight, good vibration absorption performance and excellent mechanical impact resistance, high strength, good rigidity, no creep, strong impact resistance, earthquake resistance and water hammer resistance, and is convenient for transportation, installation and maintenance.

3.温度适应范围广Wide temperature range

脱硫衬胶管道可以在-50°C～ 150°C的范围内长期使用，衬胶层不会因温度变化而与钢架脱开。

The desulfurization rubber lining pipeline can be used for a long time in the range of - 50 ° C ~ 150 ° C, and the rubber lining layer will not be separated from the steel frame due to temperature change.

4．抗老化性能优越，在正常使用压力温度下一般使用寿命达到15年以上(理论值)。管道使用6-8年后近90°转动一次，使用寿命会更长，衬胶管道可反复衬胶使用4次，降低成本，制作周期短，可确保工期。

aging resistance is superior, and the service life at normal service pressure and temperature is above 15 years. After 6-8 years of service, the pipeline will rotate at nearly 90 ° once, and the service life will be longer. The rubber lined pipeline can be used repeatedly for 4 times, reducing the cost and short production cycle, which can ensure the construction period.