基本参数.jpg

Ixef? GS-1022

聚丙烯酰胺

50% 玻璃纤维增强材料

Solvay Specialty Polymers

产品说明：

Ixef? GS-1022 is a 50% glass-fiber reinforced grade of polyarylamide (PARA) available in several colors. Parts molded from these colored resins can withstand high-energy gamma radiation without significant change in appearance and physical properties. Ixef? GS-1022 resins demonstrate no evidence of cytotoxicity, sensitization, intracutaneous reactivity or acute systemic toxicity, based on biocompatibility testing as defined by ISO 10993-1.

This resin offers superior strength and stiffness combined with outstanding surface gloss and exceptional flow and is well suited for medical applications, such as single use surgical instruments and structural device housings, and applications in food service equipment.

Colors available:

Brown: GS-1022 BN01

Blue: GS-1022 BU01

Green: GS-1022 GN01

Grey: GS-1022 GY01

Grey: GS-1022 GY02
Grey: GS-1022 GY51

White: GS-1022 WH01
Ixef? GS-1022 物性表

基本信息
填料/增强材料
添加剂
特性
用途
机构评级
RoHS 合规性
外观
形式
加工方法

物理性能	额定值	单位制	测试方法
密度	1.78	g/cm3	ISO 1183
收缩率	0.10 到 0.30	%	ISO 294-4
吸水率(23°C, 24 hr)	0.16	%	ISO 62
吸水性 - Equil, 65% RH	1.5	%	内部方法

机械性能	额定值	单位制	测试方法
拉伸模量	22000	MPa	ISO 527-2
拉伸应力(断裂)	265	MPa	ISO 527-2
拉伸应变(断裂)	1.8	%	ISO 527-2
弯曲模量	22000	MPa	ISO 178
弯曲应力	380	MPa	ISO 178

冲击性能	额定值	单位制	测试方法
无缺口伊佐德冲击强度	50	kJ/m2	ISO 180

热性能	额定值	单位制	测试方法
热变形温度(1.8 MPa, 未退火)	230	°C	ISO 75-2/A
线形热膨胀系数 - 流动	1.5E-5	cm/cm/°C	ISO 11359-2

补充信息
Property values for individual batches will vary within specification limits. Values shown are typical of Ixef GS-1022/WH01 resin; other colorants may alter values.There will be a shift in color when comparing pre-gamma sterilization and postgamma sterilization colors. It is also expected that the colors will revert to some degree, back toward the as-molded color. Lighter colors may display the greatest variation.

补充信息

Property values for individual batches will vary within specification limits. Values shown are typical of Ixef GS-1022/WH01 resin; other colorants may alter values.There will be a shift in color when comparing pre-gamma sterilization and postgamma sterilization colors. It is also expected that the colors will revert to some degree, back toward the as-molded color. Lighter colors may display the greatest variation.

注射	额定值	单位制
干燥温度	120	°C
干燥时间	0.50 到 1.5	hr
料筒后部温度	250 到 260	°C
料筒前部温度	260 到 290	°C
射嘴温度	260 到 290	°C
加工（熔体）温度	280	°C
模具温度	120 到 140	°C
注射速度	快速

注射说明
Hot runners: 250° to 260°C (482° to 500°F)StorageIxef? compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Ixef? resins be dried prior to molding following the recommendations found in this datasheet and/or in the Ixef? processing guide.

注射说明

Hot runners: 250° to 260°C (482° to 500°F)StorageIxef? compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Ixef? resins be dried prior to molding following the recommendations found in this datasheet and/or in the Ixef? processing guide.

注射成型
粒子
可用颜色
联系制造商

ISO 10993
外科器械
牙齿应用领域
医疗/护理用品
医疗器材
医疗器械

超强刚性
尺寸稳定性良好
出色的外观
低吸湿性
电子束消毒
放射性可透的
辐射消毒
高强度
好的消毒性
环氧乙烷消毒
抗伽马辐射
良好的抗蠕变性
流动性高
耐化学性良好
生物兼容性
伽玛稳定剂

玻璃纤维增强材料, 50% 填料按重量