东莞市常平平治塑胶原料贸易行
AFFINITY PL 1888G
Polyolefin Plastomer
产品说明:
AFFINITY* PL 1888G Polyolefin Plastomer for Packaging films is used for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of 0.2 for an ~1.0 mil sealant layer in a coextruded film and run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps.
Complies with:
- For use in monolayer films and as the sealant layer in multilayer films
- For fresh-cut produce, meat, cheese, and other high speed packaging applications requiring good machinability
- Fast processing on narrow die gaps
Complies with:
- U.S. FDA FCN 424
- EU, No 10/2011
AFFINITY PL 1888G 包装薄膜用聚烯烃塑性体用于需要低密封起始温度和良好机械加工性(低一致摩擦系数和低阻滞力)的高速包装应用。这种树脂旨在为共挤出薄膜中的约 1.0 密耳密封胶层提供 0.2 的 COF,并且在大多数挤出设备上运行快速且无故障,包括配备窄模口的吹膜模头。用于单层薄膜和多层薄膜的密封层 用于鲜切农产品、肉类、奶酪和其他需要良好机械加工性的高速包装应用 在狭窄的模具间隙上快速加工
。
![平治公司 演示文稿_02.jpg](https://img.51pla.com/uploadpm/2021/0121/1615/9a72d4f8838648a0932e208d06e7377b.jpg)