• General purpose plastomer

• Excellent impact properties in blends with polypropylene and polyethylene

• Highly flexible with good elastic recovery

• High clarity

• Breathable (high O2 and CO2 transmission rates)

• Low temperature sealability

• Complies with U.S. FDA FCN 424 (See NOTES 1)

• Consult the regulations for complete details. (See NOTES 2)

• 通用塑性体 与聚丙烯和聚乙烯的共混物具有优异的冲击性能 高度柔韧，具有良好的弹性恢复 高透明度 透气（高 O2 和 CO2 传输率） 低温密封性 符合美国 FDA FCN 424（参见注释 1） 完整详细信息请参阅法规。（见注释 2）
  

AFFINITY EG 8100G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is a general purpose ethylene-octene copolymer exhibiting high flexibility and elasticity. AFFINITY EG 8100G can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance clarity, sealability and toughness of the structure.

Complies with:
CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS)

• EU No 10/2011

• U.S. FDA FCN 424

Consult the regulations for complete details.

AFFINITY EG 8100G 聚烯烃塑性体 (POP) 是通过 INSITE* 技术生产的。它是一种具有高柔韧性和弹性的通用乙烯-辛烯共聚物。AFFINITY EG 8100G 可用于单层和共挤薄膜以及与其他聚烯烃共混，以提高结构的透明度、密封性和韧性。符合：加拿大 HPFB 无异议（有限制） EU No 10/2011 US FDA FCN 424 有关完整详细信息，请参阅法规。