PP(聚丙烯)英文名称:Polypropylene。它是一种高密度、无侧链、高结晶必的线性聚合物，具有优良的综合性能。未着色时呈白色半透明，蜡状；比聚乙烯轻。透明度也较聚乙烯好，比聚乙烯刚硬。

PP是一种半结晶性材料。它比PE要更坚硬并且有更高的熔点。由于均聚物型的PP温度高于0℃以上时非常脆，因此许多商业的PP材料是加入1~4%乙烯的无规则共聚物或更高比率乙烯含量的钳段式共聚物。共聚物型的PP材料有较低的热扭曲温度（100℃）、更高的透明度、低光泽度、低刚性，但是有有更强的抗冲击强度。PP的冲击强度随着乙烯含量的增加而增大。PP的维卡软化温度为150℃。由于结晶度较高，这种材料的表面刚度和抗划痕特性很好

PP1013H1 A homopolymer resin that meets certified requirements for use in Medical

PP1014H1 A homopolymer resin that meets certified requirements for use in Medical

PP1024E4 A medium melt flow rate homopolymer resin designed for general-purpose injection molding.

PP1044L1 A homopolymer resin with good flowability and antistatic properties.

PP1055E2 A nucleated homopolymer resin with good flowability and antistatic properties.

PP1095E1 A clarified homopolymer resin designed for applications requiring very good transparency

PP1222F A medium melt flow rate, 20% mineral-filled compounded resin suitable for injection molded

PP1304E3 A homopolymer resin designed for injection molding applications requiring excellent flow

PP1572 A nucleated homopolymer resin designed for general-purpose compression molding

PP2252E1 A medium melt flow rate homopolymer resin designed for woven fabric applications

PP4712E1 An easy-processing homopolymer resin designed primarily for oriented film.

PP5032E3 is a polypropylene homopolymer type designed for production of monofilaments

PP5341E1 A low mel