东莞市崀峰塑胶原料有限公司
POLYFLON M-392
聚四氟乙烯
Daikin Fluorochemicals (China) Co., Ltd.
产品说明：
POLYFLON PTFE M-series is a granular powder for compression molding. As melt viscosity is extremely high, it cannot be used for molding applied to general plastic. Therefore basically at first it is compressed in the mold and is fused by sintering over its melting point. Various molding methods are developed.
There are many types of POLYFLON PTFE to be applied the methods, conditions in mold processing and application.
Features
There are many types of POLYFLON PTFE to be applied the methods, conditions in mold processing and application.
Features
Good flowability, small particle size, sharp particle size distribution and low electrostatic charging property. Suited for thin-walled mold gap and iso static molding because of the excellent filling property.
POLYFLON M-392 物性表
| 基本信息 | |
|---|---|
| 特性 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | |
|---|---|---|---|
| 表观密度 | 0.86 | g/cm3 | |
| 平均颗粒尺寸 | 400 | μm |
PTFE(聚四氟乙烯) M-18/大金
特性：通用
用途：棒材
加工方法：压缩模塑
参数： 密度 / 比重：2.15 到 2.16g/cm3 表观密度：0.49g/cm3 收缩率：2.6到3.6% 拉伸强度：40到60MPa 伸长率：300 到 450%
PTFE(聚四氟乙烯) M-112/大金
特性：可焊接，抗蠕变，柔韧性
用途：隔膜
加工方法：压缩模塑
参数： 比重：2.14 到 2.16g/cm3 表观密度：0.34g/cm3 收缩率：4.0到5.0% 拉伸强度：35MPa 伸长率：350%
