美国杜邦PFA 340 挤出级 电气性能良好 绝缘材料 压缩模塑 注射成型
PFA塑料为少量全氟丙基全氟乙烯基醚与聚四氟乙烯的共聚物。熔融粘结性增强,溶体粘度下降,而性能与聚四氟乙烯相比无变化。此种树脂可以直接采用普通热塑性成型方法加工成制品。适于制作耐腐蚀件,减磨耐磨件、密封件、绝缘件和医疗器械零件,高温电线、电缆绝缘层,防腐设备、密封材料、泵阀衬套,和化学容器。
Teflon? PFA 340
全氟烷氧基
DuPont Fluoropolymers
产品说明:
For inventory control purposes product name may be followed by an X.
Products labeled PFA 340 and PFA 340 X are equivalent and all information in this document is applicable to both.
Typical Application
Applications for DuPont? Teflon ? PFA 340 include extruded tubing and other profiles for hose, wire and cable insulation, and sleeving; industrial film; and injection or compression molded articles requiring superior electrical, chemical, and thermal properties.
DuPont? Teflon ? PFA 340 is a general-purpose fluoroplastic resin available in pellet form. Compared with other grades of Teflon ? PFA, its most unique features are a relatively high melt flow rate (typical MFR of 14) and properties that make it suitable for a variety of processes and demanding end uses. Table 1 shows the typical property data for Teflon ? PFA 340.
Teflon ? PFA 340 is used when traditional extrusion and molding processes are required for producing products with the superior properties of a fluoroplastic resin. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ? PFA 340 can be used to improve processing rates. Compared with other fluoroplastics, creep resistance at high service temperatures provides a superior balance and level of end-use properties. Teflon ? PFA 340 combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene.
Properly processed products made from neat Teflon ? PFA 340 resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.
In a flame situation, products of Teflon ? PFA 340 resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
Teflon ? PFA 340 meets the requirements of ASTM D3307, Type I
Products labeled PFA 340 and PFA 340 X are equivalent and all information in this document is applicable to both.
Typical Application
Applications for DuPont? Teflon ? PFA 340 include extruded tubing and other profiles for hose, wire and cable insulation, and sleeving; industrial film; and injection or compression molded articles requiring superior electrical, chemical, and thermal properties.
DuPont? Teflon ? PFA 340 is a general-purpose fluoroplastic resin available in pellet form. Compared with other grades of Teflon ? PFA, its most unique features are a relatively high melt flow rate (typical MFR of 14) and properties that make it suitable for a variety of processes and demanding end uses. Table 1 shows the typical property data for Teflon ? PFA 340.
Teflon ? PFA 340 is used when traditional extrusion and molding processes are required for producing products with the superior properties of a fluoroplastic resin. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ? PFA 340 can be used to improve processing rates. Compared with other fluoroplastics, creep resistance at high service temperatures provides a superior balance and level of end-use properties. Teflon ? PFA 340 combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene.
Properly processed products made from neat Teflon ? PFA 340 resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.
In a flame situation, products of Teflon ? PFA 340 resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
Teflon ? PFA 340 meets the requirements of ASTM D3307, Type I
Teflon? PFA 340 物性表
基本信息 | |
---|---|
黄卡编号 | |
特性 |
|
用途 |
|
形式 |
|
加工方法 |
|
物理性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
比重 | 2.15 | g/cm3 | ASTM D792 |
熔流率(熔体流动速率)(372°C/5.0 kg) | 14 | g/10 min | ASTM D3307, ISO 12086 |
吸水率(24 hr) | 0.030 | % | ASTM D570 |
硬度 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
肖氏硬度(邵氏 D) | 55 | ASTM D2240, ISO 868 |
机械性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
抗张强度 | ASTM D3307, ISO 12086 | ||
23°C | 25.0 | MPa | ASTM D3307, ISO 12086 |
250°C | 12.0 | MPa | ASTM D3307, ISO 12086 |
伸长率 | ASTM D3307, ISO 12086 | ||
断裂, 23°C | 300 | % | ASTM D3307, ISO 12086 |
断裂, 250°C | 480 | % | ASTM D3307, ISO 12086 |
弯曲模量 | ASTM D790, ISO 178 | ||
23°C | 590 | MPa | ASTM D790, ISO 178 |
250°C | 55.0 | MPa | ASTM D790, ISO 178 |
热性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
熔融温度 | 305 | °C | ASTM D4591 |
美国杜邦PFA 340 挤出级 电气性能良好 绝缘材料 压缩模塑 注射成型
PFA物料性能
1、 为少量全氟丙基全氟乙烯基醚与聚四氟乙烯的共聚物。熔融粘结性增强,溶体粘度下降,而性能与聚四氟乙烯相比无变化。此种树脂可以直接采用普通热塑性成型方法加工成制品。
2、长期使用温度-196--260摄氏度,有卓越的耐化学腐蚀性,对所有化学品都耐腐蚀,摩擦系数在塑料中最低,还有很好的电性能,其电绝缘性不受温度影响,有“塑料王”之称。
3、其耐化学药品性与聚四氟乙烯相似,比偏氟乙烯好。
4、其抗蠕变性和压缩强度均比聚四氟乙烯好,拉伸强度高,伸长率可达100-300%。介电性好,耐辐射性能优异。阻燃性达V0级。
5、适于制作耐腐蚀件,减磨耐磨件、密封件、绝缘件和医疗器械零件。
6、高温电线、电缆绝缘层,防腐设备、密封材料、泵阀衬套,和化学容器。
成型性能
1.结晶料,吸湿小。可采用通常得热塑性塑料得加工方法加工成制品。
2.流动性差,极易分解,分解时产生腐蚀气体。宜严格控制成型温度不要超过475摄氏度,模具应加热至150-200摄氏度,浇注系统对料流阻力应小。
3.半透明粒料,注塑、挤出成型。成型温度350-400摄氏度,475摄氏度以上容易引起变色或发生气泡。并注意脱模会较困难。
4、因熔融的材料对金属有腐蚀作用,长期生产,模具需要电镀铬处理。
全氟烷氧基树脂
PFA树脂相对来说是比较新的可熔融加工的氟塑料。
PFA的熔点大约为580F,密度为2.13— 2.16g/cc(克/立方厘米)。PFA与 PTFE和FEP相似,但在302T以上时,机械性能略优于FEP,且可在高达500F下的温度下使用,它的耐化学品性与PTFE相当。PFA的产品形式有用于模塑和挤塑的粒状产品,用于旋转模塑和涂料的粉状产品;其半成品有膜、板、棒和管材。美国市场经销的PFA树脂有DUPOut公司的Teflon牌、Daikin公司的Neoflon牌、Ansimont公司的Hthen牌、HOechst Celanese公司的 Hostafl牌。PFA的用途与FEP类似。
广裕塑胶现货供应:PP,PE,PVC,ABS,PC,PC/ABS,PA6,PA66,,PA6T,PA9T,PAMXD6,IXEF,PA11,PA12,PBT,PET,PPS,LCP,PEI,PPSU,PSU,氟树脂 (PVDF,PFA,PTFE,FEP,ECTFE ),PEEK,TPU,TPV,TPE,食品级降解塑料(PBAT,PLA,PBS,PBST)等。
免费提供原料:物性表,UL黄卡,随货同行(提供)SGS,MSDS,FDA,LFGB,USP,COA,PFOS,REACH, ROSH/SONY等资料。