EL-Lene? H5840B

Technical Datasheet |Supplied by SCG Chemicals

EL-Lene? H5840B by SCG Chemicals is a recyclable high density polyethylene (HDPE) grade. Exhibits high environmental stress cracking resistance (ESCR), good surface appearance, good processibility and good printability. EL-Lene? H5840B is insoluble in water and suitable for processing by blow molding extrusion. Recommended for chemical bottles, chemical drums, lube oil bottles, brake fluid bottles, personal and homecare bottles. Complies with U.S FDA 21 CFR 177.1520.

Physical	Nominal Value	Unit	Test Method
Density		g/cm3	ASTM D1505
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg		g/10 min
190°C/21.6 kg		g/10 min
Environmental Stress-Cracking Resistance (ESCR)(122°F, 25% Igepal, Compression Molded, F50)		hr	ASTM D1693B
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield		psi
Break		psi
Tensile Elongation(Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact(73°F)		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature		°F	ASTM D746
Vicat Softening Temperature		°F	ASTM D1525
Melting Temperature		°F	ASTM D2117

HDPE EL-LENE H5840B 我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！

我司供应其它品牌原料:

通用型塑胶原料种类如下：

ABS ABS高胶粉 ADPOLY AS(SAN) CA CAB EAA EVA GPPS HDPE HIPS LDPE LLDPE MBS MDPE MS MVLDPE(茂金属) PP PVC ULDPE

工程塑胶原料种类如下：

PA （尼龙）类 ： 包括PA6 PA66 PA12 PA11 PA612 PA610 PA46

高耐温材料 ：LCP PEEK PEI PPA PTFE PVDF

合金类： PA ABS PC ABS PA PTFE POM PTFE PC/TPFE PBT/ABS PBT/ASA PBT/F/PTFE PBT/PC PBT/PET

高刚性材料类： POM 以有 POM加各种填充合金

热塑弹性体： BR EMA CPE OBCs POE PBE POP SBR SBS SEBS SURLYN SIS SSBR TPE TPEE TPO TPR TPSIV TPU TPV TPX