东莞市崀峰塑胶原料有限公司
Vydyne 88X-D
聚酰胺66/6共聚物
Ascend Performance Materials Operations LLC
产品说明：
Vydyne 88X-D is medium-viscosity PA66/6 random copolymer used for injection-molding applications. It provides benefits of high flow, fast cycles and good surface finish of the final parts. This copolymer is specifically designed to be used in application that requires high strength, good toughness, good surface lubricity and abrasion resistance.
Vydyne 88X-D is available in natural color, and it is the product of choice for low-yellowness-required applications. Vydyne 88X-D maintains the chemical resistance typical of PA66/6 to many chemicals, machine and motor oils, solvents and gasoline.
Typical Applications/End Uses:
Vydyne 88X-D is available in natural color, and it is the product of choice for low-yellowness-required applications. Vydyne 88X-D maintains the chemical resistance typical of PA66/6 to many chemicals, machine and motor oils, solvents and gasoline.
Typical Applications/End Uses:
Vydyne 88X-D has been used in many injection-molding applications such as cable ties/tie straps, terminal blocks, bearings, bushings, cams, electrical connectors and housings and many other hardware and general consumer-industrial parts.
Vydyne 88X-D 物性表
| 基本信息 | |
|---|---|
| 添加剂 |
|
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| RoHS 合规性 |
|
| UL文件号 |
|
| 外观 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
|---|---|---|---|---|
| 密度 | 1.14 | -- | g/cm3 | ISO 1183 |
| 收缩率 | ISO 294-4 | |||
| 垂直流动方向 : 23°C, 2.00 mm | 1.8 | -- | % | ISO 294-4 |
| 流动方向 : 23°C, 2.00 mm | 1.8 | -- | % | ISO 294-4 |
| 吸水率 | ISO 62 | |||
| 23°C, 24 hr | 1.4 | -- | % | ISO 62 |
| 平衡, 23°C, 50% RH | 2.8 | -- | % | ISO 62 |
| 机械性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
|---|---|---|---|---|
| 拉伸模量(23°C) | 3400 | 1800 | MPa | ISO 527-2 |
| 拉伸应力 | ISO 527-2 | |||
| 屈服, 23°C | 86.0 | 60.0 | MPa | ISO 527-2 |
| 断裂, 23°C | 50.0 | 40.0 | MPa | ISO 527-2 |
| 拉伸应变(屈服, 23°C) | 5.0 | 10 | % | ISO 527-2 |
| 标称拉伸断裂应变(23°C) | 27 | 50 | % | ISO 527-2 |
| 弯曲模量(23°C) | 2900 | 980 | MPa | ISO 178 |
| 弯曲强度(23°C) | 90.0 | 30.0 | MPa | ISO 178 |
| 泊松比 | 0.40 | -- | ISO 527-2 |
| 冲击性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
|---|---|---|---|---|
| 简支梁缺口冲击强度 | ISO 179/1eA | |||
| -30°C | 5.0 | 5.0 | kJ/m2 | ISO 179/1eA |
| 23°C | 6.0 | 30 | kJ/m2 | ISO 179/1eA |
| 简支梁无缺口冲击强度 | ISO 179/1eU | |||
| -30°C | 无断裂 | 无断裂 | ISO 179/1eU | |
| 23°C | 无断裂 | 无断裂 | ISO 179/1eU | |
| 悬壁梁缺口冲击强度 | ISO 180 | |||
| -30°C | 5.0 | 5.0 | kJ/m2 | ISO 180 |
| 23°C | 6.0 | 30 | kJ/m2 | ISO 180 |
| 热性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
|---|---|---|---|---|
| 热变形温度 | ||||
| 0.45 MPa, 未退火 | 183 | -- | °C | ISO 75-2/B |
| 1.8 MPa, 未退火 | 62.0 | -- | °C | ISO 75-2/A |
| 熔融温度 | 253 | -- | °C | ISO 11357-3 |
| 线形热膨胀系数 | ISO 11359-2 | |||
| 流动 : 23 到 55°C, 2.00 mm | 1.0E-4 | -- | cm/cm/°C | ISO 11359-2 |
| 横向 : 23 到 55°C, 2.00 mm | 1.0E-4 | -- | cm/cm/°C | ISO 11359-2 |
| RTI Elec | UL 746 | |||
| 0.400 mm | 130 | -- | °C | UL 746 |
| 0.710 mm | 130 | -- | °C | UL 746 |
| 1.50 mm | 130 | -- | °C | UL 746 |
| 3.00 mm | 130 | -- | °C | UL 746 |
| RTI Imp | UL 746 | |||
| 0.400 mm | 75.0 | -- | °C | UL 746 |
| 0.710 mm | 75.0 | -- | °C | UL 746 |
| 1.50 mm | 75.0 | -- | °C | UL 746 |
| 3.00 mm | 75.0 | -- | °C | UL 746 |
| RTI | UL 746 | |||
| 0.400 mm | 75.0 | -- | °C | UL 746 |
| 0.710 mm | 85.0 | -- | °C | UL 746 |
| 1.50 mm | 85.0 | -- | °C | UL 746 |
| 3.00 mm | 85.0 | -- | °C | UL 746 |
| 电气性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
|---|---|---|---|---|
| 体积电阻率(0.750 mm) | 1.0E+10 | -- | ohms·cm | IEC 60093 |
| 介电强度(1.00 mm) | 26 | -- | kV/mm | IEC 60243 |
| 耐电弧性(3.00 mm) | PLC 5 | -- | ASTM D495 | |
| 漏电起痕指数(3.00 mm) | 600 | -- | V | IEC 60112 |
| 高电弧燃烧指数(HAI) | UL 746 | |||
| 0.710 mm | PLC 0 | -- | UL 746 | |
| 1.50 mm | PLC 0 | -- | UL 746 | |
| 3.00 mm | PLC 0 | -- | UL 746 | |
| 高电压电弧起痕速率 (HVTR) | PLC 0 | -- | UL 746 | |
| 热丝引燃 (HWI) | UL 746 | |||
| 0.710 mm | PLC 4 | -- | UL 746 | |
| 1.50 mm | PLC 3 | -- | UL 746 | |
| 3.00 mm | PLC 3 | -- | UL 746 |
| 可燃性 | 干燥 | 调节后的 | 单位制 | 测试方法 |
|---|---|---|---|---|
| UL 阻燃等级 | UL 94 | |||
| 0.400 mm | V-2 | -- | UL 94 | |
| 0.710 mm | V-2 | -- | UL 94 | |
| 1.50 mm | V-2 | -- | UL 94 | |
| 3.00 mm | V-2 | -- | UL 94 | |
| 灼热丝易燃指数 | IEC 60695-2-12 | |||
| 0.710 mm | 800 | -- | °C | IEC 60695-2-12 |
| 1.50 mm | 800 | -- | °C | IEC 60695-2-12 |
| 3.00 mm | 930 | -- | °C | IEC 60695-2-12 |
| 热灯丝点火温度 | IEC 60695-2-13 | |||
| 0.710 mm | 700 | -- | °C | IEC 60695-2-13 |
| 1.50 mm | 700 | -- | °C | IEC 60695-2-13 |
| 3.00 mm | 700 | -- | °C | IEC 60695-2-13 |
| 极限氧指数 | 28 | -- | % | ISO 4589-2 |
| 注射 | 干燥 | 单位制 | |
|---|---|---|---|
| 干燥温度 | 70.0 | °C | |
| 干燥时间 | 1.0 到 3.0 | hr | |
| 建议的最大回制料比例 | 25 | % | |
| 料筒后部温度 | 250 到 270 | °C | |
| 料筒中部温度 | 260 到 275 | °C | |
| 料筒前部温度 | 270 到 280 | °C | |
| 射嘴温度 | 270 到 290 | °C | |
| 加工（熔体）温度 | 275 到 290 | °C | |
| 模具温度 | 65.0 到 95.0 | °C |
VYDYNE 00XFS Ascend Performance Materials Operations LLC 尼龙66/6
VYDYNE 21SPF1 Ascend Performance Materials Operations LLC 尼龙66
VYDYNE 25WSP Ascend Performance Materials Operations LLC 尼龙66
VYDYNE 22HSP Ascend Performance Materials Operations LLC 尼龙66
VYDYNE 21SPF Ascend Performance Materials Operations LLC 尼龙66
VYDYNE 41 Ascend Performance Materials Operations LLC 尼龙66
VYDYNE 21SPG1 Ascend Performance Materials Operations LLC 尼龙66
VYDYNE 21X1 Ascend Performance Materials Operations LLC 尼龙66
VYDYNE 21Z Ascend Performance Materials Operations LLC 尼龙66
VYDYNE 21ZLV Ascend Performance Materials Operations LLC 尼龙66
