东莞市佳盼塑胶原料有限公司
杜邦DuPont 耐磨 POM 500CL 用于抗磨耗的机械零件一手货源 提供UL黄卡原厂带拖 提供COA，一级代理价格 厂家价格，代理电话
POM塑胶原料用途
1.汽车工业方面：制造汽车泵，汽化器部件，动力阀万向节轴承曲轴卡扣输油管轴承马达齿轮，把手，仪表板，汽车窗升降机装置，电开关安全扣等（附图）
2.机械制造业：齿轮驱动轴链条阀门阀杆螺母轴承凸轮叶轮滚轮喷头导轨衬套管接头和机械结构件等传动部件
3.电子电气家用电器领域：制造插头，开关按扭继电器洗衣机滑轮盒式磁带的轴和轮壳电子计机外壳以及电视机，洗衣机电冰箱电话机收录机洗碟机的各种零部件等
4.精密仪器方面：制造架子支撑架罩体摩擦垫板以及钟表，相机其它精密仪器的零件
5.工业与消费品：用于耐腐蚀的消防水龙头，钢笔的笔杆和笔套玩具，梳子，拉链睫毛油棒等。
一手货源 免费试料质量保证。
随便提供UL认证、FDA认证、材质、ISO、ASTM物性资料、ROHS(SGS)报告、物质安全资料表(MSDS)物性、报价、UL报告、RoSH标准、SGS检测报告等）...
公司长期回收工厂剩余美国杜邦POM 500CL塑胶原料。欢迎来电详谈！
美国杜邦POM 500CL 提供UL黄卡介绍
| Component - Plastics | E41938 | |
| E I DUPONT DE NEMOURS CO INC | ||
| ENGINEERING POLYMERS, CHESTNUT RUN PLAZA, PO BOX 80713, WILMINGTON DE 19880-0713 | ||
| 500CL | ||
| Acetal Polyoxymethylene (POM), "Delrin", furnished as pellets | ||
| Min Thk | Flame | RTI | RTI | RTI | |||
| Color | (mm) | Class | HWI | HAI | Elec | Imp | Str |
| NC, BK | 0.75 | HB | 4 | 0 | 50 | 50 | 50 |
| 1.5 | HB | 3 | 0 | 100 | 80 | 85 | |
| 3.0 | HB | 3 | 0 | 100 | 80 | 85 |
| Comparative Tracking Index (CTI): | 0 | Inclined Plane Tracking (IPT): | - |
| Dielectric Strength (kV/mm): | 27 | Volume Resistivity (10xohm-cm): | 13 |
| High-Voltage Arc Tracking Rate (HVTR): | 0 | High Volt, Low Current Arc Resis (D495): | 5 |
| Dimensional Stability (%): | 0 |
| NOTE - | (1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) Material designations may be prefixed by "ZYT" for Zytel or "MIN" for Minlon or "DEL" for Delrin or "CRA" for Crastin or "RYN" for Rynite or "ETPV" for ETPV or "SOR" for Sorona grades. |
| ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. |
| Report Date:1983-11-30 Last Revised:2012-06-21 |
| IEC and ISO Test Methods | ||||
| Test Name | Test Method | Units | Thk (mm) | Value |
| Flammability | IEC 60695-11-10 | Class (color) | 0.75 | HB75 (NC, BK) |
| 1.5 | HB75 (NC, BK) | |||
| 3.0 | HB40 (NC, BK) | |||
| Glow-Wire Flammability (GWFI) | IEC 60695-2-12 | C | - | - |
| Glow-Wire Ignition (GWIT) | IEC 60695-2-13 | C | - | - |
| IEC Comparative Tracking Index | IEC 60112 | Volts (Max) | - | - |
| IEC Ball Pressure | IEC 60695-10-2 | C | - | - |
| ISO Heat Deflection (1.80 MPa) | ISO 75-2 | C | - | - |
| ISO Tensile Strength | ISO 527-2 | MPa | - | - |
| ISO Flexural Strength | ISO 178 | MPa | - | - |
| ISO Tensile Impact | ISO 8256 | kJ/m2 | - | - |
| ISO Izod Impact | ISO 180 | kJ/m2 | - | - |
| ISO Charpy Impact | ISO 179-2 | kJ/m2 | - | - |
POM 500CL产品应用
POM 900P产品仓库实拍
