10对科隆模块，10对科龙模块，10对科隆条，10对科龙条

科隆模块介绍

1、卡接模块与科隆LSA-PLUS系列模块兼容。

2、接触点的设计基于气密性原理，和线缆之间获得可靠连接。

3、尺寸：(H x W x D): 122.5mm x 21.5mm x 40.5mm (10对)

4、使用环境条件：温度5~40℃；相对湿度＜85%（ 30℃）；大气压力70~106KPa

5、拉脱力：锡青铜，镀银（20~40uinch）适用线径为0.4~0.6mm，成端后拉脱力不小于25N。

6、阻燃性：塑料件采用PBT或阻燃ABS，其燃烧性能应达到GB/T 5169.7-1985标准。

7、绝缘电阻：在标准大气压下，任一不相连的两接线端子间，其绝缘电阻不小于1000MΩ。

8、端子间接触电阻：在标准大气压下，任一不相连的两接线端子间接触电阻不大于7mΩ。

9、成端接触电阻：在标准的试验条件下导线与端子的成端接触电阻不大于3mΩ。

10、寿命：卡接寿命不小于200次。

11、类型及规格：10对，不可断类型。　 可引入0.4~0.6mm线径单股铜芯塑料线缆，卡接模块可提供站场用户、地区用户通信配线及通信设备线对的防护。模块上可进行用户间跳接线，也可供引入柜内元器件相互间连接配线使用。模块具有开断内外线功能，并可安装保安单元或保安排，供用户作电路过压、过流保护使用。模块化设计，安装方便。

10 pairs of Cologne module, 10 pairs of Cologne module, Cologne bar, Cologne bar

Introduction to Cologne module

1. The card module is compatible with Cologne lsa-plus series modules.

2. The design of the contact point is based on the principle of air tightness, and the reliable connection between the contact point and the cable is obtained.

3. Size: (H x W x D): 122.5mm x 21.5mm x 40.5mm (10 pairs)

4. Environmental conditions: temperature 5 ~ 40 ℃; Relative humidity 85% (30 ℃); Atmospheric pressure 70 ~ 106kpa

5. Pull off force: tin bronze, silver plated (20 ~ 40uinch), applicable wire diameter is 0.4 ~ 0.6mm, pull off force after finishing is not less than 25N.

6. Flame retardancy: PBT or flame retardant ABS shall be used for plastic parts, and its combustion performance shall reach GB / T 5169.7-1985 standard.

7. Insulation resistance: under standard atmospheric pressure, the insulation resistance between any two unconnected terminals shall not be less than 1000m Ω。 8. Contact resistance between terminals: under standard atmospheric pressure, the contact resistance between any two unconnected terminals shall not be greater than 7m Ω。

9. Terminal contact resistance: under standard test conditions, the terminal contact resistance between conductor and terminal is not more than 3m Ω。

10. Service life: not less than 200 times.

11. Type and specification: 10 pairs, unbreakable type. 0.4 ~ 0.6 mm Single Strand copper core plastic cable can be introduced, and the clamping module can provide the protection of communication wiring and communication equipment pair for station users and regional users. The module can be used for jump wiring between users, and can also be used for connecting wiring between components in the lead-in cabinet. The module has the function of breaking internal and external wires, and can be installed with security unit or security arrangement, which can be used by users for circuit overvoltage and overcurrent protection. Modular design, easy installation.