东莞市佳盼塑胶原料有限公司
美国杜邦POM FG900P 润滑型POM 易脱模一级代理价格 厂家价格代理电话汽车内部件一手货源 免费试料质量保证。
随便提供UL认证、FDA认证、材质、ISO、ASTM物性资料、ROHS(SGS)报告、物质安全资料表(MSDS)物性、报价、UL报告、RoSH标准、SGS检测报告等）...
公司长期回收工厂剩余美国杜邦POM FG900P塑胶原料。欢迎来电详谈！
美国杜邦POM FG900P物性表
Delrin? FG900P NC010 物性表
| 基本信息 | |
|---|---|
| 黄卡编号 | |
| 添加剂 |
|
| 特性 |
|
| 机构评级 |
|
| 形式 |
|
| 加工方法 |
|
| 多点数据 |
|
| 部件标识代码 (ISO 11469) |
|
| 树脂ID (ISO 1043) |
|
POM塑胶原料FG900P密度
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 其它性能 | IZOD冲击强度 | 73℉ | ASTM D-256 | 0.7 | ft.lb/in |
| 基本性能 | 密度 | ASTM D-792 | 1.42 |
||
美国杜邦POM FG900P热性能
| 热性能 | 热变形温度 | 1.8MPa | ASTM D-648 | 136 | ℃ |
| 熔点 | ASTM D-2133 | 347 | ℉ | ||
| 线性热膨胀系数 | -40 to85℉ | ASTM D-696 | 5.6 | 10-5in/in.℉ | |
| 可燃烧性 | UL-94 | 94HB | |||
| 线性热膨胀系数 | -40 to29℃ | ASTM D-696 | 10.1 | 10-5m/m.℃ | |
| 热变形温度 | 0.5MPa | ASTM D-648 | 172 | ℃ | |
| 热变形温度 | 264psi | ASTM D-648 | 277 | ℉ | |
| 熔点 | ASTM D-2133 | 175 | ℃ | ||
| 热变形温度 | 66psi | ASTM D-648 | 342 | ℉ |
POM FG900P UL黄卡报告
| Component - Plastics | E41938 | |
| E I DUPONT DE NEMOURS CO INC | ||
| ENGINEERING POLYMERS, CHESTNUT RUN PLAZA, PO BOX 80713, WILMINGTON DE 19880-0713 | ||
| FG100P, FG500P, FG900P | ||
| Acetal Polyoxymethylene (POM), "Delrin", furnished as pellets | ||
| Min Thk | Flame | RTI | RTI | RTI | |||
| Color | (mm) | Class | HWI | HAI | Elec | Imp | Str |
| ALL | 0.75 | HB | 4 | 0 | 50 | 50 | 50 |
| 1.5 | HB | 4 | 0 | 110 | 85 | 90 | |
| 3.0 | HB | 3 | 0 | 110 | 90 | 95 |
| Comparative Tracking Index (CTI): | 0 | Inclined Plane Tracking (IPT): | - |
| Dielectric Strength (kV/mm): | - | Volume Resistivity (10xohm-cm): | - |
| High-Voltage Arc Tracking Rate (HVTR): | 0 | High Volt, Low Current Arc Resis (D495): | 5 |
| Dimensional Stability (%): | - |
| NOTE - | (1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) Material designations may be prefixed by "ZYT" for Zytel or "MIN" for Minlon or "DEL" for Delrin or "CRA" for Crastin or "RYN" for Rynite or "ETPV" for ETPV or "SOR" for Sorona grades. |
| ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. |
| Report Date:1977-08-30 Last Revised:2011-04-14 |
| IEC and ISO Test Methods | ||||
| Test Name | Test Method | Units | Thk (mm) | Value |
| Flammability | IEC 60695-11-10 | Class (color) | 0.75 | HB75 (ALL) |
| 1.5 | HB75 (ALL) | |||
| 3.0 | HB40 (ALL) | |||
| Glow-Wire Flammability (GWFI) | IEC 60695-2-12 | C | - | - |
| Glow-Wire Ignition (GWIT) | IEC 60695-2-13 | C | - | - |
| IEC Comparative Tracking Index | IEC 60112 | Volts (Max) | - | - |
| IEC Ball Pressure | IEC 60695-10-2 | C | - | - |
| ISO Heat Deflection (1.80 MPa) | ISO 75-2 | C | - | - |
| ISO Tensile Strength | ISO 527-2 | MPa | - | - |
| ISO Flexural Strength | ISO 178 | MPa | - | - |
| ISO Tensile Impact | ISO 8256 | kJ/m2 | - | - |
| ISO Izod Impact | ISO 180 | kJ/m2 | - | - |
| ISO Charpy Impact | ISO 179-2 | kJ/m2 | - | - |
