上海正逢塑胶有限公司
PA66 美国杜邦 Minlon? 10B140 NC010
DuPont Performance Polymers Minlon? 10B140 NC010 Nylon 66 (Unverified Data**) 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.50 g/cc | 0.0542 lb/in3 | DAM; ISO 1183 |
| 吸水率 | 5.0 %
@Thickness 2.00 mm
|
5.0 %
@Thickness 0.0787 in
|
DAM; Sim. to ISO 62 |
| 水分吸收 | 1.60 %
@Thickness 2.00 mm
|
1.60 %
@Thickness 0.0787 in
|
DAM; Sim. to ISO 62 |
| 线性成型收缩率,Flow | 0.012 cm/cm | 0.012 in/in | DAM; ISO 294-4 2577 |
| 线性成型收缩率，横向 | 0.012 cm/cm | 0.012 in/in | DAM; ISO 294-4 2577 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 洛氏硬度（M 级） | 95 | 95 | DAM; ISO 2039-2 |
| 洛氏硬度（R 级） | 121 | 121 | DAM; ISO 2039-2 |
| 抗张强度(断裂) | 55.0 MPa | 7980 psi | 50%RH; ISO 527-1/-2 |
| 85.0 MPa | 12300 psi | DAM; ISO 527-1/-2 | |
| 伸长率 (断裂) | 4.0 % | 4.0 % | DAM; ISO 527-1/-2 |
| 9.0 % | 9.0 % | 50%RH; ISO 527-1/-2 | |
| 拉伸模量 | 3.80 GPa | 551 ksi | 50%RH; ISO 527-1/-2 |
| 6.60 GPa | 957 ksi | DAM; ISO 527-1/-2 | |
| 剪切模量 | 0.427 GPa
@Temperature 150 °C
|
61.9 ksi
@Temperature 302 °F
|
DAM; Dynamic; ISO 11403-1 -2 |
| 0.544 GPa
@Temperature 110 °C
|
78.9 ksi
@Temperature 230 °F
|
DAM; Dynamic; ISO 11403-1 -2 | |
| 1.226 GPa
@Temperature 62.0 °C
|
177.8 ksi
@Temperature 144 °F
|
DAM; Dynamic; ISO 11403-1 -2 | |
| 2.393 GPa
@Temperature 10.0 °C
|
347.1 ksi
@Temperature 50.0 °F
|
DAM; Dynamic; ISO 11403-1 -2 | |
| 2.504 GPa
@Temperature -20.0 °C
|
363.2 ksi
@Temperature -4.00 °F
|
DAM; Dynamic; ISO 11403-1 -2 | |
| 2.692 GPa
@Temperature -50.0 °C
|
390.4 ksi
@Temperature -58.0 °F
|
DAM; Dynamic; ISO 11403-1 -2 | |
| 简支梁无缺口冲击强度 | 3.50 J/cm2 | 16.7 ft-lb/in2 | DAM; ISO 179/1eU |
| 5.50 J/cm2 | 26.2 ft-lb/in2 | 50%RH; ISO 179/1eU | |
| 2.50 J/cm2
@Temperature -30.0 °C
|
11.9 ft-lb/in2
@Temperature -22.0 °F
|
DAM; ISO 179/1eU | |
| 2.50 J/cm2
@Temperature -30.0 °C
|
11.9 ft-lb/in2
@Temperature -22.0 °F
|
50%RH; ISO 179/1eU | |
| 简支梁缺口冲击强度 | 0.350 J/cm2 | 1.67 ft-lb/in2 | DAM; ISO 179/1eA |
| 0.400 J/cm2 | 1.90 ft-lb/in2 | 50%RH; ISO 179/1eA | |
| 0.200 J/cm2
@Temperature -30.0 °C
|
0.952 ft-lb/in2
@Temperature -22.0 °F
|
50%RH; ISO 179/1eA | |
| 0.300 J/cm2
@Temperature -30.0 °C
|
1.43 ft-lb/in2
@Temperature -22.0 °F
|
DAM; ISO 179/1eA | |
| 拉伸蠕变模量(1 hr) | 3500 MPa
@Time 3600 sec
|
508000 psi
@Time 1.00 hour
|
50%RH; ISO 899-1 |
| 拉伸蠕变模量(1000 hr) | 2100 MPa
@Time 3.60e+6 sec
|
305000 psi
@Time 1000 hour
|
50%RH; ISO 899-1 |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 体积电阻率 | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | 50%RH; IEC 60093 |
| 表面电阻 | = 1.00e+15 ohm | = 1.00e+15 ohm | 50%RH; IEC 60093 |
| 介电常数 | 3.9
@Frequency 1.00e+6 Hz
|
3.9
@Frequency 1.00e+6 Hz
|
DAM; IEC 60250 |
| 4.5
@Frequency 1.00e+6 Hz
|
4.5
@Frequency 1.00e+6 Hz
|
50%RH; IEC 60250 | |
| 4.5
@Frequency 100 Hz
|
4.5
@Frequency 100 Hz
|
DAM; IEC 60250 | |
| 9.4
@Frequency 100 Hz
|
9.4
@Frequency 100 Hz
|
50%RH; IEC 60250 | |
| 介电强度 | 40.0 kV/mm | 1020 kV/in | DAM; IEC 60243-1 |
| 耗散因数 | 0.011
@Frequency 100 Hz
|
0.011
@Frequency 100 Hz
|
DAM; IEC 60250 |
| 0.023
@Frequency 1.00e+6 Hz
|
0.023
@Frequency 1.00e+6 Hz
|
DAM; IEC 60250 | |
| 0.055
@Frequency 1.00e+6 Hz
|
0.055
@Frequency 1.00e+6 Hz
|
50%RH; IEC 60250 | |
| 0.21
@Frequency 100 Hz
|
0.21
@Frequency 100 Hz
|
50%RH; IEC 60250 | |
| 相比耐漏电起痕指数(CTI) | 575 V | 575 V | DAM; IEC 60112 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线形热膨胀系数 - 流动 | 65.0 μm/m-°C | 36.1 μin/in-°F | DAM; ISO 11359-1/-2 |
| 线性热膨胀系数,横向流动 | 90.0 μm/m-°C | 50.0 μin/in-°F | DAM; ISO 11359-1/-2 |
| 熔融温度 | 263 °C | 505 °F | DAM; 10°C/min; ISO 11357-1/-3 |
| 载荷下热变形温度(0.46 MPa) | 240 °C | 464 °F | DAM; ISO 75-1/-2 |
| 载荷下热变形温度(1.8 MPa) | 170 °C | 338 °F | DAM; ISO 75-1/-2 |
| 可燃性(UL94) | HB
@Thickness 0.700 mm
|
HB
@Thickness 0.0276 in
|
DAM; IEC 60695-11-10 |
