上海正逢塑胶有限公司
PA66 美国杜邦 Minlon? 10B140 BK061
DuPont Performance Polymers Minlon? 10B140 BK061 Nylon 66 (Unverified Data**) 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.50 g/cc | 0.0542 lb/in3 | DAM; ISO 1183 |
| 填料含量 | 40 % | 40 % | DAM |
| Water Absorption | 1.6 %
@Temperature 23.0 °C
|
1.6 %
@Temperature 73.4 °F
|
Equilibrium 50%RH; DAM; ISO 62, Similar to |
| 5.0 %
@Temperature 23.0 °C
|
5.0 %
@Temperature 73.4 °F
|
Saturation, immersed; DAM; ISO 62, Similar to |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(断裂) | 54.0 MPa
@Temperature 23.0 °C
|
7830 psi
@Temperature 73.4 °F
|
50%RH; ISO 527 |
| 82.0 MPa
@Temperature 23.0 °C
|
11900 psi
@Temperature 73.4 °F
|
DAM; ISO 527 | |
| 伸长率 (断裂) | 3.5 %
@Temperature 23.0 °C
|
3.5 %
@Temperature 73.4 °F
|
DAM; ISO 527 |
| 9.0 %
@Temperature 23.0 °C
|
9.0 %
@Temperature 73.4 °F
|
50%RH; ISO 527 | |
| 拉伸模量 | 3.80 GPa
@Temperature 23.0 °C
|
551 ksi
@Temperature 73.4 °F
|
50%RH; ISO 527 |
| 6.60 GPa
@Temperature 23.0 °C
|
957 ksi
@Temperature 73.4 °F
|
DAM; ISO 527 | |
| 悬壁梁缺口冲击强度 | 3.50 kJ/m2
@Temperature 23.0 °C
|
1.67 ft-lb/in2
@Temperature 73.4 °F
|
DAM; ISO 180/1A |
| 4.00 kJ/m2
@Temperature 23.0 °C
|
1.90 ft-lb/in2
@Temperature 73.4 °F
|
50%RH; ISO 180/1A | |
| 简支梁无缺口冲击强度 | 3.50 J/cm2
@Temperature 23.0 °C
|
16.7 ft-lb/in2
@Temperature 73.4 °F
|
DAM; ISO 179/1eU |
| 6.00 J/cm2
@Temperature 23.0 °C
|
28.6 ft-lb/in2
@Temperature 73.4 °F
|
50%RH; ISO 179/1eU | |
| 简支梁缺口冲击强度 | 0.350 J/cm2
@Temperature 23.0 °C
|
1.67 ft-lb/in2
@Temperature 73.4 °F
|
DAM; ISO 179/1eA |
| 0.450 J/cm2
@Temperature 23.0 °C
|
2.14 ft-lb/in2
@Temperature 73.4 °F
|
50%RH; ISO 179/1eA |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 相比耐漏电起痕指数(CTI) | = 600 V
@Temperature 23.0 °C
|
= 600 V
@Temperature 73.4 °F
|
DAM; UL 746A |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 熔融温度 | 263 °C | 505 °F | 10°C/min; DAM; ISO 11357-1/-3 |
| 载荷下热变形温度(0.46 MPa) | 240 °C | 464 °F | DAM; ISO 75-1/-2 |
| 载荷下热变形温度(1.8 MPa) | 170 °C | 338 °F | DAM; ISO 75-1/-2 |
| UL RTI | 105 °C
@Thickness 0.710 mm
|
221 °F
@Thickness 0.0280 in
|
DAM; UL 746B |
| 120 °C
@Thickness 3.00 mm
|
248 °F
@Thickness 0.118 in
|
DAM; UL 746B | |
| 120 °C
@Thickness 1.50 mm
|
248 °F
@Thickness 0.0591 in
|
DAM; UL 746B | |
| UL RTI，机械冲击 | 65.0 °C
@Thickness 0.710 mm
|
149 °F
@Thickness 0.0280 in
|
DAM; UL 746B |
| 105 °C
@Thickness 1.50 mm
|
221 °F
@Thickness 0.0591 in
|
DAM; UL 746B | |
| 115 °C
@Thickness 3.00 mm
|
239 °F
@Thickness 0.118 in
|
DAM; UL 746B | |
| UL RTI，机械无冲击 | 65.0 °C
@Thickness 0.710 mm
|
149 °F
@Thickness 0.0280 in
|
DAM; UL 746B |
| 115 °C
@Thickness 1.50 mm
|
239 °F
@Thickness 0.0591 in
|
DAM; UL 746B | |
| 115 °C
@Thickness 3.00 mm
|
239 °F
@Thickness 0.118 in
|
DAM; UL 746B | |
| 可燃性(UL94) | HB
@Thickness 1.50 mm
|
HB
@Thickness 0.0591 in
|
DAM; UL94 |
| HB
@Thickness 0.710 mm
|
HB
@Thickness 0.0280 in
|
DAM; UL94 | |
| HB
@Thickness 3.00 mm
|
HB
@Thickness 0.118 in
|
DAM; UL94 | |
| HB
@Thickness 3.00 mm
|
HB
@Thickness 0.118 in
|
DAM; IEC 60695-11-10 | |
| HB
@Thickness 1.50 mm
|
HB
@Thickness 0.0591 in
|
DAM; IEC 60695-11-10 | |
| HB
@Thickness 0.710 mm
|
HB
@Thickness 0.0280 in
|
DAM; IEC 60695-11-10 |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工（熔体）温度 | 285 - 305 °C | 545 - 581 °F | DAM |
| 295 °C | 563 °F | DAM; Optimum | |
| 模具温度 | 70.0 - 120 °C | 158 - 248 °F | DAM |
| 100 °C | 212 °F | DAM; optimum | |
| 干燥温度 | 80.0 °C | 176 °F | DAM |
| 干燥时间 | 2.00 - 4.00 hour | 2.00 - 4.00 hour | DAM |
| 水分含量 | = 0.20 % | = 0.20 % | DAM |
| 材料描述 | 测试方法 | |
|---|---|---|
| 外观 | Black Color | DAM |
| Drying Recommended | Yes, if moisture content of resin exceeds recommended level | DAM |
| Filler | Mineral filler | DAM |
| 形式 | Pellets | DAM |
| Generic | Nylon 66 | DAM |
| Material Status | Current | DAM |
| 部件标识代码 | PA66-MD40 | ISO 11469; DAM |
| Polymer Family | Polyamide | DAM |
| Polymer Type | PA66 | DAM |
| 加工方法 | Injection Molding | DAM |
| 产品分类 | Low Warp Resins | DAM |
| Mineral Reinforced Resins | DAM | |
| Mineral Reinforced Resins | DAM | |
| 树脂识别 | PA66-MD40 | ISO 1043; DAM |
| 符合RoHS指令 | Contact Manufacturer | DAM |
