东莞市佳盼塑胶原料有限公司
厂价销售POM美国杜邦100P 增韧POM 提供UL黄卡
Component - Plastics | E41938 | |
E I DUPONT DE NEMOURS CO INC | ||
ENGINEERING POLYMERS, CHESTNUT RUN PLAZA, PO BOX 80713, WILMINGTON DE 19880-0713 | ||
100P, 500P, 900P, 1700P | ||
Acetal Polyoxymethylene (POM), "Delrin", furnished as pellets |
Min Thk | Flame | RTI | RTI | RTI | |||
Color | (mm) | Class | HWI | HAI | Elec | Imp | Str |
ALL | 0.75 | HB | 4 | 0 | 50 | 50 | 50 |
1.5 | HB | 4 | 0 | 110 | 85 | 90 | |
3.0 | HB | 3 | 0 | 110 | 90 | 95 |
Comparative Tracking Index (CTI): | 0 | Inclined Plane Tracking (IPT): | - |
Dielectric Strength (kV/mm): | - | Volume Resistivity (10xohm-cm): | - |
High-Voltage Arc Tracking Rate (HVTR): | 0 | High Volt, Low Current Arc Resis (D495): | 5 |
Dimensional Stability (%): | - |
NOTE - | (1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) Material designations may be prefixed by "ZYT" for Zytel or "MIN" for Minlon or "DEL" for Delrin or "CRA" for Crastin or "RYN" for Rynite or "ETPV" for ETPV or "SOR" for Sorona grades. |
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. |
Report Date:1977-08-30 Last Revised:2015-06-25 |
POM美国杜邦100P物性介绍
Delrin? 100P NC010 物性表
基本信息
黄卡编号 E41938-257616
添加剂 润滑剂脱模
特性 润滑
用途 片材型材
机构评级 UL未评级
形式 粒子
加工方法 挤出片材挤出成型型材挤出成型注射成型