东莞市佳盼塑胶原料有限公司
POM/500AF/美国杜邦
- 生产企业： 美国杜邦
①原料描述部分
| 规格级别 | 耐磨, 增强 其它 注塑 | 外观颜色 | |
|---|---|---|---|
| 该料用途 | 齿轮、衬套、凸轮和其它耐磨擦的应用。 | ||
| 备注说明 | 加工特性：一般等级,添加20% TEFLON3纤维，表面润滑。 产品特性：与500相似的物理性能，但有超低的磨擦系数与高度耐磨耗率。 | ||
POM 500AF UL黄卡介绍
| Component - Plastics | E41938 | |
| E I DUPONT DE NEMOURS CO INC | ||
| ENGINEERING POLYMERS, CHESTNUT RUN PLAZA, PO BOX 80713, WILMINGTON DE 19880-0713 | ||
| 500AF, 100AF | ||
| Acetal Polyoxymethylene/Polytetrafluoroethylene (POM/PTFE), "Delrin", furnished as pellets | ||
| Min Thk | Flame | RTI | RTI | RTI | |||
| Color | (mm) | Class | HWI | HAI | Elec | Imp | Str |
| ALL | 1.5 | HB | 4 | 0 | 105 | 85 | 90 |
| 3.0 | HB | 2 | 0 | 105 | 85 | 90 |
| Comparative Tracking Index (CTI): | 0 | Inclined Plane Tracking (IPT): | - |
| Dielectric Strength (kV/mm): | - | Volume Resistivity (10xohm-cm): | - |
| High-Voltage Arc Tracking Rate (HVTR): | 0 | High Volt, Low Current Arc Resis (D495): | 4 |
| Dimensional Stability (%): | - |
| NOTE - | (1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) Material designations may be prefixed by "ZYT" for Zytel or "MIN" for Minlon or "DEL" for Delrin or "CRA" for Crastin or "RYN" for Rynite or "ETPV" for ETPV or "SOR" for Sorona grades. |
| ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. |
| Report Date:1977-08-30 Last Revised:2013-06-12 |
| IEC and ISO Test Methods | ||||
| Test Name | Test Method | Units | Thk (mm) | Value |
| Flammability | IEC 60695-11-10 | Class (color) | 1.5 | HB75 (ALL) |
| 3.0 | HB40 (ALL) | |||
| Glow-Wire Flammability (GWFI) | IEC 60695-2-12 | C | - | - |
| Glow-Wire Ignition (GWIT) | IEC 60695-2-13 | C | - | - |
| IEC Comparative Tracking Index | IEC 60112 | Volts (Max) | - | - |
| IEC Ball Pressure | IEC 60695-10-2 | C | - | - |
| ISO Heat Deflection (1.80 MPa) | ISO 75-2 | C | - | - |
| ISO Tensile Strength | ISO 527-2 | MPa | - | - |
| ISO Flexural Strength | ISO 178 | MPa | - | - |
| ISO Tensile Impact | ISO 8256 | kJ/m2 | - | - |
| ISO Izod Impact | ISO 180 | kJ/m2 | - | - |
| ISO Charpy Impact | ISO 179-2 | kJ/m2 | - | - |
POM 500AF产品用途介绍
POM塑胶原料各种性能和型号
东莞佳盼公司风雨10年，专业经营POM塑料性能：增强加纤POM，耐磨POM，导电POM，高抗冲POM，抗紫外线POM，增韧POM，食品级POM，抗静电POM等，货源充足，现货供应，价格实惠，欢迎新老客户前来订购。
POM 511DP NC010 |
热稳定，中等粘度 |
POM 511KM NC000 |
低磨损磨蚀POM |
POM 520MP NC010 |
含20%PTFE润滑剂，低磨擦系数，耐磨损，中等粘度 |
POM 525GR NC000 |
加20%玻璃纤维增强，高刚性，抗蠕变，中等粘度 |
POM 527UV BK701 |
紫外线稳定剂，抗撞击，高刚性，抗蠕变，中等粘度 |
POM 527UV NC010 |
紫外线稳定剂，抗撞击，高刚性，抗蠕变，中等粘度 |
POM 527UVE NC010 |
紫外线稳定剂，脱模剂，低挥发 |
POM 527UVE RD402 |
紫外线稳定剂，红色 |
POM 570 NC000 |
加20%玻璃纤维增强，高强度，中等粘度 |
POM 577 BK000 |
加20%玻璃纤维增强，抗紫外线，高强度，中等粘度 |
POM 900P BK602 |
尺寸稳定，耐疲劳，高强度，低粘度 |
POM 900P NC010 |
热稳定，尺寸稳定，耐疲劳，高强度，低粘度 |
POM 911DP BK402 |
热稳定，尺寸稳定，低粘度 |
POM 911DP NC010 |
热稳定，尺寸稳定，低粘度 |
POM FG100AL NC010 |
抗撞击，耐磨损，高粘度，食品级 |
POM FG100P NC010 |
抗撞击，耐疲劳，高强度，高粘度，食品级 |
POM FG100TL NC010 |
含1.5%PTFE润滑剂，耐磨损，高强度，高粘度，食品级 |
POM FG150 NC010 |
高抗撞击，耐疲劳，高强度，高粘度，食品级 |
