东莞市广裕塑胶原料有限公司
德国朗盛PA66 AKV15 15%玻纤增强 高强度PA66
Lanxess Durethan? AKV 15 000000 Nylon 66, 15% Glass Fiber
Polymer,Thermoplastic,Nylon,Nylon 66,Nylon 66, 20% Glass Fiber Filled
Lanxess
产品说明:
PA 66, injection molding grade, 15% glass fibers
Lanxess Durethan? AKV 15 000000 Nylon 66, 15% Glass Fiber 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.23 g/cc | 0.0444 lb/in3 | ISO 1183 |
| 吸水率 | 7.0 % | 7.0 % | Test Sim. to ISO 62 |
| 平衡吸湿 | 2.4 % | 2.4 % | 23°C/50% R.H.; Test Sim. to ISO 62 |
| 粘度测试 | 146 cm3/g | 146 cm3/g | Viscosity number; ISO 307, 1157, 1628 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(断裂) | 90.0 MPa | 13100 psi | Conditioned; ISO 527-1/-2 |
| 125 MPa | 18100 psi | ISO 527-1/-2 | |
| 伸长率 (断裂) | 3.0 % | 3.0 % | ISO 527-1/-2 |
| 8.0 % | 8.0 % | Conditioned; ISO 527-1/-2 | |
| 拉伸模量 | 4.10 GPa | 595 ksi | Conditioned; ISO 527-1/-2 |
| 6.70 GPa | 972 ksi | ISO 527-1/-2 | |
| 简支梁无缺口冲击强度 | 4.00 J/cm2
@Temperature -30.0 °C
|
19.0 ft-lb/in2
@Temperature -22.0 °F
|
ISO 179/1eU |
| 4.00 J/cm2
@Temperature -30.0 °C
|
19.0 ft-lb/in2
@Temperature -22.0 °F
|
Conditioned; ISO 179/1eU | |
| 4.00 J/cm2
@Temperature 23.0 °C
|
19.0 ft-lb/in2
@Temperature 73.4 °F
|
ISO 179/1eU | |
| 5.00 J/cm2
@Temperature 23.0 °C
|
23.8 ft-lb/in2
@Temperature 73.4 °F
|
Conditioned; ISO 179/1eU | |
| 简支梁缺口冲击强度 | = 1.00 J/cm2
@Temperature -30.0 °C
|
= 4.76 ft-lb/in2
@Temperature -22.0 °F
|
ISO 179/1eA |
| = 1.00 J/cm2
@Temperature -30.0 °C
|
= 4.76 ft-lb/in2
@Temperature -22.0 °F
|
Conditioned; ISO 179/1eA | |
| = 1.00 J/cm2
@Temperature 23.0 °C
|
= 4.76 ft-lb/in2
@Temperature 73.4 °F
|
ISO 179/1eA | |
| = 1.00 J/cm2
@Temperature 23.0 °C
|
= 4.76 ft-lb/in2
@Temperature 73.4 °F
|
Conditioned; ISO 179/1eA |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 体积电阻率 | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | Conditioned; IEC 60093 |
| 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | IEC 60093 | |
| 表面电阻 | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 |
| 介电常数 | 4.0
@Frequency 1.00e+6 Hz
|
4.0
@Frequency 1.00e+6 Hz
|
Conditioned; IEC 60250 |
| 4.0
@Frequency 1.00e+6 Hz
|
4.0
@Frequency 1.00e+6 Hz
|
IEC 60250 | |
| 4.0
@Frequency 100 Hz
|
4.0
@Frequency 100 Hz
|
IEC 60250 | |
| 9.0
@Frequency 100 Hz
|
9.0
@Frequency 100 Hz
|
Conditioned; IEC 60250 | |
| 介电强度 | 30.0 kV/mm | 762 kV/in | Conditioned; IEC 60243-1 |
| 35.0 kV/mm | 889 kV/in | IEC 60243-1 | |
| 耗散因数 | 0.0080
@Frequency 100 Hz
|
0.0080
@Frequency 100 Hz
|
IEC 60250 |
| 0.015
@Frequency 1.00e+6 Hz
|
0.015
@Frequency 1.00e+6 Hz
|
IEC 60250 | |
| 0.070
@Frequency 1.00e+6 Hz
|
0.070
@Frequency 1.00e+6 Hz
|
Conditioned; IEC 60250 | |
| 0.13
@Frequency 100 Hz
|
0.13
@Frequency 100 Hz
|
Conditioned; IEC 60250 | |
| 相比耐漏电起痕指数(CTI) | 600 V | 600 V | IEC 60112 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线形热膨胀系数 - 流动 | 40.0 μm/m-°C | 22.2 μin/in-°F | ISO 11359-1/-2 |
| 线性热膨胀系数,横向流动 | 90.0 μm/m-°C | 50.0 μin/in-°F | ISO 11359-1/-2 |
| 熔融温度 | 263 °C | 505 °F | 10°C/min; ISO 11357-1/-3 |
| 载荷下热变形温度(0.46 MPa) | 250 °C | 482 °F | ISO 75-1/-2 |
| 载荷下热变形温度(1.8 MPa) | 250 °C | 482 °F | ISO 75-1/-2 |
| 载荷下热变形温度(8.0 MPa) | 70.0 °C | 158 °F | ISO 75-1/-2 |
| 可燃性(UL94) | HB
@Thickness 1.60 mm
|
HB
@Thickness 0.0630 in
|
IEC 60695-11-10 |
| HB
@Thickness 3.20 mm
|
HB
@Thickness 0.126 in
|
IEC 60695-11-10 | |
| 极限氧指数 | 22 % | 22 % | ISO 4589-1/-2 |
| 材料描述 | 测试方法 | |
|---|---|---|
| Additives | Release agent | |
| 形式 | Pellets | |
| ISO Shortname | ISO 1874-PA66, MR, 14-070, GF15 | |
| 加工 | Injection molding | |
| 区域 | Asia Pacific | |
| Europe | ||
| Near East/Africa | ||
| North America | ||
| South and Central America |
