PPA 美国阿莫科 Amodel® AT-1001L 低翘曲性耐磨损性良好耐低温冲击|价格|厂家|多少钱-全球塑胶网-移动端

PPA 美国阿莫科 Amodel? AT-1001L

Amodel? AT-1001L 物性表

基本信息
添加剂	冲击改性剂润滑剂脱模
特性	冲击改性低翘曲性耐低温冲击耐化学性良好耐磨损性良好热水可成型性润滑延展性
用途	工业部件工业应用机器/机械部件金属取代汽车电子汽车领域的应用石油/天然气用品通用外壳
RoHS 合规性	联系制造商
外观	自然色
形式	粒子
加工方法	水温模具注塑成型注射成型
多点数据	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1)

物理性能	额定值	单位制	测试方法
密度	1.11	g/cm3	ISO 1183/A
收缩率			ASTM D955
流动	1.7 到 2.2	%	ASTM D955
横向流动	1.9 到 2.1	%	ASTM D955
吸水率(24 hr)	0.75	%	ASTM D570

机械性能	额定值	单位制	测试方法
拉伸模量	1900	MPa	ASTM D638
抗张强度(断裂)	62.1	MPa	ASTM D638
伸长率			ASTM D638
屈服	6.0	%	ASTM D638
断裂	30	%	ASTM D638
弯曲模量	2210	MPa	ASTM D790
弯曲强度	96.5	MPa	ASTM D790
泊松比	0.35		ASTM E132

冲击性能	额定值	单位制	测试方法
悬壁梁缺口冲击强度			ASTM D256
-40°C	750	J/m	ASTM D256
23°C	1100	J/m	ASTM D256

热性能	额定值	单位制	测试方法
载荷下热变形温度(1.8 MPa, 退火, 3.18 mm)	120	°C	ASTM D648
熔融温度	310	°C

补充信息
Penetration Impact, ASTM D3763, 73°F, Maximum Load: 1100 lbsPenetration Impact, ASTM D3763, 73°F, Total Energy Absorbed: 40 ft-lbsPenetration Impact, ASTM D3763, 73°F, Energy to Maximum Load: 30 ft-lbsPenetration Impact, ASTM D3763, -10°F, Total Energy Absorbed: 40 ft-lbsPenetration Impact, ASTM D3763, -10°F, Maximum Load: 1260 lbsPenetration Impact, ASTM D3763, -10°F, Energy to Maximum Load: 30 ft-lbs

补充信息

Penetration Impact, ASTM D3763, 73°F, Maximum Load: 1100 lbsPenetration Impact, ASTM D3763, 73°F, Total Energy Absorbed: 40 ft-lbsPenetration Impact, ASTM D3763, 73°F, Energy to Maximum Load: 30 ft-lbsPenetration Impact, ASTM D3763, -10°F, Total Energy Absorbed: 40 ft-lbsPenetration Impact, ASTM D3763, -10°F, Maximum Load: 1260 lbsPenetration Impact, ASTM D3763, -10°F, Energy to Maximum Load: 30 ft-lbs

注射	额定值	单位制
干燥温度	110	°C
干燥时间	4.0	hr
建议的最大水分含量	0.045	%
料斗温度	79.4	°C
料筒后部温度	304 到 318	°C
料筒前部温度	316 到 329	°C
加工（熔体）温度	321 到 343	°C
模具温度	65.6 到 110	°C

注射说明
Storage: Amodel? compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel? resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel? processing guide.

注射说明

Storage: Amodel? compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel? resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel? processing guide.