盖板模具是选用工程聚丙烯pp，是选用注塑机的生产工艺，盖板模具都是根据客户要求定制的，所以尺寸规格符合工程要求，水泥盖板的生产工艺比较简单，直接将按比例混合的混凝土放入到盒子中，然后震动平台震动几秒，放在平整的地面上，经过风干，脱模，如果为了增加模具内侧的光滑程度，可以在模具内侧涂抹废机油，水泥制品的破损率，这是比较简单的生产工艺

The cover plate mould is made of Engineering polypropylene PP and injection moulding machine. The cover plate mould is customized according to the customer"s requirements, so the size and specifications meet the engineering requirements. The production process of the cement cover plate is relatively simple. pvcguancai.89ix.comjinshuguan.89ix.comgaoyaguan.89ix.comtanceqi.89ix.comxguangji.89ix.comjianc

eyii.89ix.comThe concrete mixed in proportion is directly put into the box, then the platform is shaken for several seconds and placed on the flat ground after a day"s air-drying. In order to increase the smoothness of the inner part of the mould, waste oil can be smeared on the inner part of the mould to reduce the damage rate of cement products. This is a relatively simple production process.