东莞市恒磊塑胶有限公司
ABS MAGNUM 1150 EM
MAGNUM? ABS resins are thermoplastic material which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ABS resin are available in a wide range of melt flow rates, impact strength and heat resistance for both high and low gloss applications manufactured by injection molding, sheet or profile extrusion and thermoforming processes. The automotive grades of MAGNUM ABS resins offer a wide range of gloss, viscosities, impact strength and heat properties for use in numerous automotive applications. Melt flow rates from 1 to 12 g/10 min, impact strengths from 2.5 to 12 ft-lb/in and heat distortion temperatures from 165 to 190°F are available. Available primarily as natural plus concentrates, MAGNUM ABS resins are used in a wide variety of automotive applications including structural instrument panels, consoles, pillars and exterior trim parts requiring painting and plating. Within the MAGNUM ABS product line, MAGNUM 1150 EM ABS resin is a high impact, medium heat, low gloss resin. MAGNUM? 1150 EM has improved low temperature impact strength over standard grades of ABS. MAGNUM? 1150 EM is used in applications like pillars and instrument panel trim.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.03g/cc | 0.0372lb/in3 | ASTM D792 |
| Moisture Absorption | = 10.0 % | = 10.0 % | |
| Linear Mold Shrinkage, Flow | 0.0060-0.0070cm/cm | 0.0060-0.0070in/in | ASTM D955 |
| Melt Flow | 0.90g/10 min @Load 3.80 kg, Temperature 230 °C |
0.90g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Yield | 36.5MPa @Thickness 3.20 mm |
5290psi @Thickness 0.126 in |
51 mm/min; ASTM D638 |
| Elongation at Break | 30 % @Thickness 3.20 mm |
30 % @Thickness 0.126 in |
51 mm/min; ASTM D638 |
| Elongation at Yield | 3.0 % @Thickness 3.20 mm |
3.0 % @Thickness 0.126 in |
51 mm/min; ASTM D638 |
?ABS MAGNUM 1150 EM
特性：
ABS同PS一样是一种加工性能优良的热塑性塑料，可用通用的加工方法加工。 ABS的熔体流动性比PVC和PC好，但比PE、PA及PS差，与POM和HIPS类似；ABS的流动特性属非牛顿流体，其熔体粘度对加工温度和剪切速率都有关系，但对剪切速率更为敏感。
ABS的热稳定性好，不易出现降解现象。ABS的吸水性较高，加工前应进行干燥处理。一般制品的干燥条件为温度80~85℃，时间2~4h；对特殊要求的制品（如电镀）的干燥条件为温度70~80℃，时间18~18h。 ABS制品在加工中易产生内应力，内应力的大小可通过浸入冰乙酸中检验；如应力太大和制品对应力开裂绝对禁止，应进行退火处理，具体条件为放于70~80℃的热风循环干燥箱内2~4h，再冷却至室温即可。
用途 ：
ABS树脂的最大应用领域是汽车、电子电器和建材。汽车领域的使用包括汽车仪表板、车身外板、内装饰板、方向盘、隔音板、门锁、保险杠、通风管等很多部件。在电器方面则广泛应用于电冰箱、电视机、洗衣机、空调器、计算机、复印机等电子电器中。建材方面，ABS管材、ABS卫生洁具、ABS装饰板广泛应用于建材工业。此外ABS还广泛的应用于包装、家具、体育和娱乐用品、机械和仪表工业中。 ABS树脂广泛应用于汽车工业.电器仪表工业和机械工业中,常作齿轮,汽车配件,挡泥板,扶手,冰箱内衬,叶片,轴承,把手,管道,接头,仪表壳,仪表板,盆安全帽等:在家用电器和家用电子设备的应用前景更广阔,如电视机,收录机,冰箱,冷柜,洗衣机,空调机,吸尘器和各种小家电器材:日用品有鞋,包,各种旅游箱,办公设备,玩具及各种容器等,低发泡的ABS能代替木材,适合作建材,家具和家庭用品。
?ABS MAGNUM 1150 EM 我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
