东莞市广裕塑胶原料有限公司
医用级IXEF美国苏威 GS-1022 50%玻璃纤维 高刚性 FDA USP抗伽马辐射医疗级IXEF
Ixef? GS-1022
聚丙烯酰胺
50% 玻璃纤维增强材料
Solvay Specialty Polymers
产品说明：
Ixef? GS-1022 is a 50% glass-fiber reinforced grade of polyarylamide (PARA) available in several colors. Parts molded from these colored resins can withstand high-energy gamma radiation without significant change in appearance and physical properties. Ixef? GS-1022 resins demonstrate no evidence of cytotoxicity, sensitization, intracutaneous reactivity or acute systemic toxicity, based on biocompatibility testing as defined by ISO 10993-1.
This resin offers superior strength and stiffness combined with outstanding surface gloss and exceptional flow and is well suited for medical applications, such as single use surgical instruments and structural device housings, and applications in food service equipment.
Colors available:
- Brown: GS-1022 BN01
- Blue: GS-1022 BU01
- Green: GS-1022 GN01
- Grey: GS-1022 GY01
- Grey: GS-1022 GY02
- Grey: GS-1022 GY51
- White: GS-1022 WH01
This resin offers superior strength and stiffness combined with outstanding surface gloss and exceptional flow and is well suited for medical applications, such as single use surgical instruments and structural device housings, and applications in food service equipment.
Colors available:
- Brown: GS-1022 BN01
- Blue: GS-1022 BU01
- Green: GS-1022 GN01
- Grey: GS-1022 GY01
- Grey: GS-1022 GY02
- Grey: GS-1022 GY51
- White: GS-1022 WH01
Ixef? GS-1022 物性表
| 基本信息 | |
|---|---|
| 填料/增强材料 |
|
| 添加剂 |
|
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| RoHS 合规性 |
|
| 外观 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 1.78 | g/cm3 | ISO 1183 |
| 收缩率 | 0.10 到 0.30 | % | ISO 294-4 |
| 吸水率(23°C, 24 hr) | 0.16 | % | ISO 62 |
| 吸水性 - Equil, 65% RH | 1.5 | % | 内部方法 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 拉伸模量 | 22000 | MPa | ISO 527-2 |
| 拉伸应力(断裂) | 265 | MPa | ISO 527-2 |
| 拉伸应变(断裂) | 1.8 | % | ISO 527-2 |
| 弯曲模量 | 22000 | MPa | ISO 178 |
| 弯曲应力 | 380 | MPa | ISO 178 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 无缺口伊佐德冲击强度 | 50 | kJ/m2 | ISO 180 |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 热变形温度(1.8 MPa, 未退火) | 230 | °C | ISO 75-2/A |
| 线形热膨胀系数 - 流动 | 1.5E-5 | cm/cm/°C | ISO 11359-2 |
| 补充信息 |
|---|
| Property values for individual batches will vary within specification limits. Values shown are typical of Ixef GS-1022/WH01 resin; other colorants may alter values.There will be a shift in color when comparing pre-gamma sterilization and postgamma sterilization colors. It is also expected that the colors will revert to some degree, back toward the as-molded color. Lighter colors may display the greatest variation. |
| 注射 | 额定值 | 单位制 | |
|---|---|---|---|
| 干燥温度 | 120 | °C | |
| 干燥时间 | 0.50 到 1.5 | hr | |
| 料筒后部温度 | 250 到 260 | °C | |
| 料筒前部温度 | 260 到 290 | °C | |
| 射嘴温度 | 260 到 290 | °C | |
| 加工（熔体）温度 | 280 | °C | |
| 模具温度 | 120 到 140 | °C | |
| 注射速度 | 快速 |
| 注射说明 |
|---|
| Hot runners: 250° to 260°C (482° to 500°F)StorageIxef? compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Ixef? resins be dried prior to molding following the recommendations found in this datasheet and/or in the Ixef? processing guide. |
?
