东莞市广裕塑胶原料有限公司
德固赛食品级PMMA ZK30 食品级PMMA 家用电器,卫生洁具应用，
Plexiglas? Resist zk30
聚甲基丙烯酸甲酯-丙烯酸
Evonik Industries AG
产品说明：
Product Profile:
PLEXIGLAS? Resist zk30 is an amorphous, impact-modified thermoplastic molding compound (PMMA-I).
Typical properties of impact-modified PLEXIGLAS? molding compounds are:
PLEXIGLAS? Resist zk30 is characterized by the following special properties:
Application:
Used for injection molding. Profile extrusion or coextrusion are also possible.
Examples:
lighting fixtures, writing and drawing utensils, domestic appliances and sanitaryware
PLEXIGLAS? Resist zk30 is an amorphous, impact-modified thermoplastic molding compound (PMMA-I).
Typical properties of impact-modified PLEXIGLAS? molding compounds are:
- excellent transmission and clarity
- brilliant appearance
- the pleasant feel and sound of the moldings.
PLEXIGLAS? Resist zk30 is characterized by the following special properties:
- good break resistance and impact strength
- improved resistance to stress cracking
- certified dishwasher resistance
- AMECA listing.
Application:
Used for injection molding. Profile extrusion or coextrusion are also possible.
Examples:
lighting fixtures, writing and drawing utensils, domestic appliances and sanitaryware
Plexiglas? Resist zk30 物性表
| 基本信息 | |
|---|---|
| 添加剂 |
|
| 特性 |
|
| 用途 |
|
| 形式 |
|
| 加工方法 |
|
| 多点数据 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 1.15 | g/cm3 | ISO 1183 |
| 溶化体积流率（MVR）(230°C/3.8 kg) | 1.40 | cm3/10min | ISO 1133 |
| 吸水率(平衡, 23°C, 50% RH) | 0.34 | % | ISO 62 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 拉伸模量 | 2000 | MPa | ISO 527-2/1 |
| 拉伸应力(屈服) | 51.0 | MPa | ISO 527-2/50 |
| 拉伸应变(屈服) | 4.5 | % | ISO 527-2/50 |
| 标称拉伸断裂应变 | 27 | % | ISO 527-2 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 简支梁无缺口冲击强度(23°C) | 55 | kJ/m2 | ISO 179/1eU |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 热变形温度 | |||
| 0.45 MPa, 未退火 | 96.0 | °C | ISO 75-2/B |
| 1.8 MPa, 未退火 | 91.0 | °C | ISO 75-2/A |
| 玻璃转化温度 | 114 | °C | ISO 11357-2 |
| 维卡软化温度 | 98.0 | °C | ISO 306/B50 |
| 线形热膨胀系数 - 流动(0 到 50°C) | 1.1E-4 | cm/cm/°C | ISO 11359-2 |
| 可燃性 | 额定值 | 测试方法 | |
|---|---|---|---|
| UL 阻燃等级(1.60 mm) | HB | UL 94 |
| 光学性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 折射率 | 1.490 | ISO 489 | |
| 透射率1 | 90.0 | % | ISO 13468-2 |
| 注射 | 额定值 | 单位制 | |
|---|---|---|---|
| 干燥温度 | 88.0 | °C | |
| 干燥时间 | 2.0 到 3.0 | hr | |
| 加工（熔体）温度 | 230 到 240 | °C | |
| 模具温度 | 50.0 到 70.0 | °C |
| 备注 | |
|---|---|
| 1 . | D65 |
