东莞市广裕塑胶原料有限公司
巴斯夫食品级PES E3010 食品级 透明 耐高温 通过FDA/LFGB认证
BASF Ultrason E 3010 PES
Polymer,Thermoplastic,Polyethersulfone (PES)
BASF
产品说明:
Ultrason E 3010 is an unfilled, higher viscosity injection molding and extrusion PES grade, tougher and with improved chemical resistance.
BASF Ultrason E 3010 PES 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.37 g/cc | 0.0495 lb/in3 | ISO 1183 |
| 吸水率 | 2.2 % | 2.2 % | ISO 62 |
| 平衡吸湿 | 0.80 % | 0.80 % | 23°C/50% R.H.; ISO 62 |
| 粘度测试 | 66 cm3/g | 66 cm3/g | Viscosity number |
| 线性成型收缩率,Flow | 0.0085 cm/cm | 0.0085 in/in | ISO Data |
| 线性成型收缩率，横向 | 0.0090 cm/cm | 0.0090 in/in | ISO Data |
| 熔体流动速率 | 35 g/10 min
@Load 10.0 kg, Temperature 360 °C
|
35 g/10 min
@Load 22.0 lb, Temperature 680 °F
|
ISO 1133 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 球压硬度 | 154 MPa | 22300 psi | ISO 2039-1 |
| 抗张强度(断裂) | 90.0 MPa | 13100 psi | 5mm/min; ISO 527-2 |
| 抗张强度 | 23.0 MPa
@Strain 1.00 %, Temperature 160 °C
|
3340 psi
@Strain 1.00 %, Temperature 320 °F
|
ISO 527 |
| 25.0 MPa
@Strain 1.00 %, Temperature 23.0 °C
|
3630 psi
@Strain 1.00 %, Temperature 73.4 °F
|
ISO 527 | |
| 41.0 MPa
@Strain 2.00 %, Temperature 160 °C
|
5950 psi
@Strain 2.00 %, Temperature 320 °F
|
ISO 527 | |
| 42.0 MPa
@Strain 2.00 %, Temperature 23.0 °C
|
6090 psi
@Strain 2.00 %, Temperature 73.4 °F
|
ISO 527 | |
| 50.0 MPa
@Strain 3.00 %, Temperature 160 °C
|
7250 psi
@Strain 3.00 %, Temperature 320 °F
|
ISO 527 | |
| 73.0 MPa
@Strain 4.00 %, Temperature 23.0 °C
|
10600 psi
@Strain 4.00 %, Temperature 73.4 °F
|
ISO 527 | |
| 90.0 MPa
@Strain 6.00 %, Temperature 23.0 °C
|
13100 psi
@Strain 6.00 %, Temperature 73.4 °F
|
ISO 527 | |
| 抗张强度(屈服) | 90.0 MPa | 13100 psi | 50mm/min; ISO 527-2 |
| 50.0 MPa
@Temperature 140 °C
|
7250 psi
@Temperature 284 °F
|
||
| 65.0 MPa
@Temperature 100 °C
|
9430 psi
@Temperature 212 °F
|
||
| 75.0 MPa
@Temperature 60.0 °C
|
10900 psi
@Temperature 140 °F
|
||
| 85.0 MPa
@Temperature 20.0 °C
|
12300 psi
@Temperature 68.0 °F
|
||
| 伸长率 (断裂) | 6.7 % | 6.7 % | 5mm/min; ISO 527-2 |
| 屈服伸长率 | 6.7 % | 6.7 % | 50mm/min; ISO 527-2 |
| 0.40 %
@Time 3600 sec, Pressure 10.0 MPa
|
0.40 %
@Time 1.00 hour, Pressure 1450 psi
|
140°C; ISO 899 | |
| 0.50 %
@Pressure 10.0 MPa, Time 360000 sec
|
0.50 %
@Pressure 1450 psi, Time 100 hour
|
140°C; ISO 899 | |
| 0.50 %
@Time 3600 sec, Pressure 10.0 MPa
|
0.50 %
@Time 1.00 hour, Pressure 1450 psi
|
ISO 899 | |
| 0.50 %
@Time 3600 sec, Pressure 10.0 MPa
|
0.50 %
@Time 1.00 hour, Pressure 1450 psi
|
ISO 899 | |
| 0.55 %
@Pressure 10.0 MPa, Time 360000 sec
|
0.55 %
@Pressure 1450 psi, Time 100 hour
|
ISO 899 | |
| 0.55 %
@Pressure 10.0 MPa, Time 360000 sec
|
0.55 %
@Pressure 1450 psi, Time 100 hour
|
ISO 899 | |
| 0.60 %
@Pressure 10.0 MPa, Time 3.60e+7 sec
|
0.60 %
@Pressure 1450 psi, Time 10000 hour
|
ISO 899 | |
| 0.60 %
@Time 3600 sec, Pressure 15.0 MPa
|
0.60 %
@Time 1.00 hour, Pressure 2180 psi
|
140°C; ISO 899 | |
| 0.60 %
@Pressure 10.0 MPa, Time 3.60e+6 sec
|
0.60 %
@Pressure 1450 psi, Time 1000 hour
|
140°C; ISO 899 | |
| 0.60 %
@Pressure 10.0 MPa, Time 3.60e+7 sec
|
0.60 %
@Pressure 1450 psi, Time 10000 hour
|
ISO 899 | |
| 0.70 %
@Pressure 1.52 MPa, Time 360000 sec
|
0.70 %
@Pressure 220 psi, Time 100 hour
|
140°C; ISO 899 | |
| 0.80 %
@Time 3600 sec, Pressure 20.0 MPa
|
0.80 %
@Time 1.00 hour, Pressure 2900 psi
|
140°C; ISO 899 | |
| 0.90 %
@Time 3600 sec, Pressure 20.0 MPa
|
0.90 %
@Time 1.00 hour, Pressure 2900 psi
|
ISO 899 | |
| 0.90 %
@Time 3600 sec, Pressure 20.0 MPa
|
0.90 %
@Time 1.00 hour, Pressure 2900 psi
|
ISO 899 | |
| 1.0 %
@Pressure 20.0 MPa, Time 360000 sec
|
1.0 %
@Pressure 2900 psi, Time 100 hour
|
ISO 899 | |
| 1.0 %
@Pressure 20.0 MPa, Time 360000 sec
|
1.0 %
@Pressure 2900 psi, Time 100 hour
|
ISO 899 | |
| 1.0 %
@Pressure 15.0 MPa, Time 360000 sec
|
1.0 %
@Pressure 2180 psi, Time 100 hour
|
140°C; ISO 899 | |
| 1.1 %
@Pressure 20.0 MPa, Time 360000 sec
|
1.1 %
@Pressure 2900 psi, Time 100 hour
|
140°C; ISO 899 | |
| 1.1 %
@Time 3600 sec, Pressure 25.0 MPa
|
1.1 %
@Time 1.00 hour, Pressure 3630 psi
|
140°C; ISO 899 | |
| 1.2 %
@Pressure 20.0 MPa, Time 3.60e+7 sec
|
1.2 %
@Pressure 2900 psi, Time 10000 hour
|
ISO 899 | |
| 1.2 %
@Pressure 20.0 MPa, Time 3.60e+7 sec
|
1.2 %
@Pressure 2900 psi, Time 10000 hour
|
ISO 899 | |
| 1.4 %
@Time 3600 sec, Pressure 30.0 MPa
|
1.4 %
@Time 1.00 hour, Pressure 4350 psi
|
ISO 899 | |
| 1.4 %
@Time 3600 sec, Pressure 30.0 MPa
|
1.4 %
@Time 1.00 hour, Pressure 4350 psi
|
ISO 899 | |
| 1.5 %
@Pressure 30.0 MPa, Time 360000 sec
|
1.5 %
@Pressure 4350 psi, Time 100 hour
|
ISO 899 | |
| 1.5 %
@Pressure 30.0 MPa, Time 360000 sec
|
1.5 %
@Pressure 4350 psi, Time 100 hour
|
ISO 899 | |
| 1.5 %
@Time 3600 sec, Pressure 30.0 MPa
|
1.5 %
@Time 1.00 hour, Pressure 4350 psi
|
140°C; ISO 899 | |
| 1.5 %
@Pressure 20.0 MPa, Time 3.60e+6 sec
|
1.5 %
@Pressure 2900 psi, Time 1000 hour
|
140°C; ISO 899 | |
| 1.6 %
@Pressure 25.0 MPa, Time 360000 sec
|
1.6 %
@Pressure 3630 psi, Time 100 hour
|
140°C; ISO 899 | |
| 1.9 %
@Pressure 30.0 MPa, Time 3.60e+7 sec
|
1.9 %
@Pressure 4350 psi, Time 10000 hour
|
ISO 899 | |
| 1.9 %
@Pressure 30.0 MPa, Time 3.60e+7 sec
|
1.9 %
@Pressure 4350 psi, Time 10000 hour
|
ISO 899 | |
| 2.0 %
@Time 3600 sec, Pressure 40.0 MPa
|
2.0 %
@Time 1.00 hour, Pressure 5800 psi
|
ISO 899 | |
| 2.0 %
@Time 3600 sec, Pressure 40.0 MPa
|
2.0 %
@Time 1.00 hour, Pressure 5800 psi
|
ISO 899 | |
| 2.1 %
@Pressure 25.0 MPa, Time 3.60e+6 sec
|
2.1 %
@Pressure 3630 psi, Time 1000 hour
|
140°C; ISO 899 | |
| 2.2 %
@Pressure 30.0 MPa, Time 360000 sec
|
2.2 %
@Pressure 4350 psi, Time 100 hour
|
140°C; ISO 899 | |
| 2.3 %
@Pressure 40.0 MPa, Time 360000 sec
|
2.3 %
@Pressure 5800 psi, Time 100 hour
|
ISO 899 | |
| 2.3 %
@Pressure 40.0 MPa, Time 360000 sec
|
2.3 %
@Pressure 5800 psi, Time 100 hour
|
ISO 899 | |
| 2.7 %
@Pressure 40.0 MPa, Time 3.60e+7 sec
|
2.7 %
@Pressure 5800 psi, Time 10000 hour
|
ISO 899 | |
| 2.7 %
@Time 3600 sec, Pressure 50.0 MPa
|
2.7 %
@Time 1.00 hour, Pressure 7250 psi
|
ISO 899 | |
| 2.7 %
@Pressure 40.0 MPa, Time 3.60e+7 sec
|
2.7 %
@Pressure 5800 psi, Time 10000 hour
|
ISO 899 | |
| 2.7 %
@Time 3600 sec, Pressure 50.0 MPa
|
2.7 %
@Time 1.00 hour, Pressure 7250 psi
|
ISO 899 | |
| 3.0 %
@Pressure 30.0 MPa, Time 3.60e+6 sec
|
3.0 %
@Pressure 4350 psi, Time 1000 hour
|
140°C; ISO 899 | |
| 3.1 %
@Pressure 50.0 MPa, Time 360000 sec
|
3.1 %
@Pressure 7250 psi, Time 100 hour
|
ISO 899 | |
| 3.1 %
@Pressure 50.0 MPa, Time 360000 sec
|
3.1 %
@Pressure 7250 psi, Time 100 hour
|
ISO 899 | |
| 3.6 %
@Pressure 50.0 MPa, Time 3.60e+7 sec
|
3.6 %
@Pressure 7250 psi, Time 10000 hour
|
ISO 899 | |
| 3.6 %
@Pressure 50.0 MPa, Time 3.60e+7 sec
|
3.6 %
@Pressure 7250 psi, Time 10000 hour
|
ISO 899 | |
| Creep Strength | 5.00 MPa
@Time 3.60e+7 sec
|
725 psi
@Time 10000 hour
|
in water at 95°C |
| 8.00 MPa
@Time 3.60e+6 sec
|
1160 psi
@Time 1000 hour
|
in water at 95°C | |
| 16.0 MPa
@Time 360000 sec
|
2320 psi
@Time 100 hour
|
in water at 95°C | |
| 30.0 MPa
@Time 36000 sec
|
4350 psi
@Time 10.0 hour
|
in water at 95°C | |
| 弹性模量 | 2.25 GPa
@Temperature 140 °C
|
326 ksi
@Temperature 284 °F
|
ISO 527 |
| 2.40 GPa
@Temperature 100 °C
|
348 ksi
@Temperature 212 °F
|
ISO 527 | |
| 2.50 GPa
@Temperature 60.0 °C
|
363 ksi
@Temperature 140 °F
|
ISO 527 | |
| 2.55 GPa
@Temperature 20.0 °C
|
370 ksi
@Temperature 68.0 °F
|
ISO 527 | |
| 拉伸模量 | 2.70 GPa | 392 ksi | ISO 527-2 |
| 弯曲模量 | 2.70 GPa | 392 ksi | ISO 178 |
| 剪切模量 | 0.200 GPa
@Temperature 225 °C
|
29.0 ksi
@Temperature 437 °F
|
ISO 6721 |
| 0.900 GPa
@Temperature 200 °C
|
131 ksi
@Temperature 392 °F
|
ISO 6721 | |
| 0.950 GPa
@Temperature 100 °C
|
138 ksi
@Temperature 212 °F
|
ISO 6721 | |
| 1.00 GPa
@Temperature 50.0 °C
|
145 ksi
@Temperature 122 °F
|
ISO 6721 | |
| 悬壁梁缺口冲击强度 | 15.7 kJ/m2 | 7.50 ft-lb/in2 | ISO 180/A |
食品医疗包装部：食品级医疗级PP，PE，PVC，ABS，PC，PC/ABS，PA6，PA66，,PA6T，PA9T，PAMXD6，IXEF，PA11，PA12，PBT，PET,PPS，LCP，PPSU，PSU，PVDF，PEEK，TPU，TPV，TPE，食品级降解塑料（PBAT，PLA，PBS，PBST）等。
免费提供原料：物性表，UL黄卡，随货同行(提供)SGS,MSDS,FDA,LFGB,USP,COA,PFOS,REACH, ROSH/SONY等资料。
