美国首诺PA66 VYDYNE R543 产品说明:
Vydyne R543 is general purpose, 43% glass-fiber reinforced PA66 resin. Available in natural, it is an injection-molding grade resin that is lubricated for machine feed, flow and mold release.
Glass-reinforced Vydyne resins provide a higher heat distortion temperature, better resistance to creep, higher impact and better dimensional stability when compared with unreinforced PA66. This product has good chemical resistance to a broad range of chemicals, including many aliphatic and aromatic hydrocarbons found in most solvents, gasoline, hydraulic fluids, greases and machine oils.
Vydyne R543 resin has tensile strength and modulus properties just below aluminum and zinc and can replace these metals in numerous applications due to an excellent balance of properties. Reduction in production costs, energy consumption and part weight are key advantages of Vydyne glass-reinforced PA66 resins over aluminum and/or zinc die-cast parts.
物理性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
---|---|---|---|---|
密度 | 1.50 | -- | g/cm3 | ISO 1183 |
收缩率 | ISO 294-4 | |||
垂直流动方向 : 23°C, 2.00 mm | 0.90 | -- | % | ISO 294-4 |
流动方向 : 23°C, 2.00 mm | 0.40 | -- | % | ISO 294-4 |
吸水率 | ISO 62 | |||
23°C, 24 hr | 0.60 | -- | % | ISO 62 |
平衡, 23°C, 50% RH | 1.5 | -- | % | ISO 62 |
机械性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
---|---|---|---|---|
拉伸模量(23°C) | 14800 | 11300 | MPa | ISO 527-2 |
拉伸应力(断裂, 23°C) | 225 | 170 | MPa | ISO 527-2 |
拉伸应变(断裂, 23°C) | 3.0 | 4.0 | % | ISO 527-2 |
弯曲模量(23°C) | 12500 | 9400 | MPa | ISO 178 |
弯曲应力(23°C) | 340 | 250 | MPa | ISO 178 |
泊松比 | 0.40 | -- | ISO 527-2 |
美国首诺PA66 VYDYNE R543
PA66塑胶原料为半透明、白色或黑色结晶形聚合物,具有可塑性。密度1.15g/cm3。熔点252℃。脆化温度-30℃。热分解温度大于350℃。 连续耐热80-120℃,平衡吸水率2.5%。能耐酸、碱、大多数无机盐水溶液、卤代烷、烃类、酯类、酮类等腐蚀,但易容于苯酚、甲酸等极性溶剂。具有优良的耐磨性、自润滑性,机械强度较高。但吸水性较大,因而尺寸稳定性较差。
特性
PA66在聚酰胺材料中有较高的熔点。它是一种半晶体-晶体材料。PA66在较高温度也能保持较强的强度和刚度。PA66在成型后仍然具有吸湿性,其程度主要取决于材料的组成、壁厚以及环境条件。在产品设计时,一定要考虑吸湿性对几何稳定性的影响。
为了提高PA66的机械特性,经常加入各种各样的改性剂。玻璃就是最常见的添加剂,有时为了提高抗冲击性还加入合成橡胶,如EPDM和SBR等。PA66的粘性较低,因此流动性很好(但不如PA6)。这个性质可以用来加工很薄的元件。它的粘度对温度变化很敏感。PA66的收缩率在1%~2%之间,加入玻璃纤维添加剂可以将收缩率降低到0.2%~1% 。收缩率在流程方向和与流程方向相垂直方向上的相异是较大的。A66 Zytel 塑胶原料性能特点? PA66是PA系列中机械强度最高、应用最广的品种,因其结晶度高,故其刚性、耐热性都较高超声波可焊接低分子量经润滑可加工性良好良好的成型性能良好的电气性能流动性高耐化学性良好耐磨损性良好耐疲劳性能耐油性能耐油脂性能生产阶段快脱模性能良好等;