东莞市樟木头柯瑞达塑胶经营部
SABIC Innovative Plastics Cycoloy? CY9650 PC ABS
Polymer,Thermoplastic,ABS Polymer,Polycarbonate/ABS Alloy, Unreinforced,Polycarbonate (PC)
SABIC Innovative Plastics (GE Plastics)
产品说明:
| 材料描述 | 测试方法 | |
|---|---|---|
| Ball Pressure Test, 75°C/- 2°C | Pass | IEC 60695-10-2 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线形热膨胀系数 - 流动 | 70.0 μm/m-°C
@Temperature -40.0 - 40.0 °C
|
38.9 μin/in-°F
@Temperature -40.0 - 104 °F
|
ASTM E 831 |
| 80.0 μm/m-°C
@Temperature -40.0 - 40.0 °C
|
44.4 μin/in-°F
@Temperature -40.0 - 104 °F
|
ISO 11359-2 | |
| 线性热膨胀系数,横向流动 | 70.0 μm/m-°C
@Temperature -40.0 - 40.0 °C
|
38.9 μin/in-°F
@Temperature -40.0 - 104 °F
|
ASTM E 831 |
| 80.0 μm/m-°C
@Temperature -40.0 - 40.0 °C
|
44.4 μin/in-°F
@Temperature -40.0 - 104 °F
|
ISO 11359-2 | |
| 导热系数 | 0.200 W/m-K | 1.39 BTU-in/hr-ft2-°F | ISO 8302 |
| 载荷下热变形温度(0.46 MPa) | 126 °C | 259 °F | Flatw 80*10*4 sp=64mm; ISO 75/Bf |
| 载荷下热变形温度(1.8 MPa) | 105 °C | 221 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |
| 107 °C
@Thickness 3.20 mm
|
225 °F
@Thickness 0.126 in
|
unannealed; ASTM D 648 | |
| 维卡软化温度 | 126 °C | 259 °F | Rate B/50; ASTM D 1525 |
| 126 °C | 259 °F | Rate B/50; ISO 306 | |
| 127 °C | 261 °F | Rate B/120; ISO 306 | |
| UL RTI | 60.0 °C | 140 °F | UL 746B |
| UL RTI，机械冲击 | 60.0 °C | 140 °F | UL 746B |
| UL RTI，机械无冲击 | 60.0 °C | 140 °F | UL 746B |
| 可燃性(UL94) | HB
@Thickness 1.50 mm
|
HB
@Thickness 0.0591 in
|
UL 94 |
| HB
@Thickness 3.00 mm
|
HB
@Thickness 0.118 in
|
2nd value; UL 94 |
PC ABS, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat Aging
This data was supplied by SABIC-IP for the Americas region.
SABIC Innovative Plastics Cycoloy? CY9650 PC ABS 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 比重 | 1.14 g/cc | 1.14 g/cc | ASTM D 792 |
| 密度 | 1.14 g/cc | 0.0412 lb/in3 | ISO 1183 |
| 平衡吸湿 | 0.15 % | 0.15 % | 23°C / 50% RH; ISO 62 |
| 饱和吸水率 | 0.40 %
@Temperature 23.0 °C
|
0.40 %
@Temperature 73.4 °F
|
ISO 62 |
| 粘度 | 170000 cP
@Temperature 260 °C
|
170000 cP
@Temperature 500 °F
|
melt; 1500 sec-1; ISO 11443 |
| 线性成型收缩率,Flow | 0.0050 - 0.0070 cm/cm
@Thickness 3.20 mm
|
0.0050 - 0.0070 in/in
@Thickness 0.126 in
|
SABIC Method |
| 线性成型收缩率，横向 | 0.0050 - 0.0070 cm/cm
@Thickness 3.20 mm
|
0.0050 - 0.0070 in/in
@Thickness 0.126 in
|
SABIC Method |
| 熔体流动速率 | 25 g/10 min
@Load 5.00 kg, Temperature 260 °C
|
25 g/10 min
@Load 11.0 lb, Temperature 500 °F
|
[cm^3/10 min] Melt Volume Rate; ISO 1133 |
| 26 g/10 min
@Load 5.00 kg, Temperature 260 °C
|
26 g/10 min
@Load 11.0 lb, Temperature 500 °F
|
ASTM D 1238 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(断裂) | 53.0 MPa | 7690 psi | Type I, 50 mm/min; ASTM D 638 |
| 53.0 MPa | 7690 psi | 50 mm/min; ISO 527 | |
| 抗张强度(屈服) | 54.0 MPa | 7830 psi | Type I, 50 mm/min; ASTM D 638 |
| 54.0 MPa | 7830 psi | 50 mm/min; ISO 527 | |
| 伸长率 (断裂) | 120 % | 120 % | Type I, 50 mm/min; ASTM D 638 |
| 120 % | 120 % | 50 mm/min; ISO 527 | |
| 屈服伸长率 | 4.5 % | 4.5 % | Type I, 50 mm/min; ASTM D 638 |
| 4.5 % | 4.5 % | 50 mm/min; ISO 527 | |
| 拉伸模量 | 2.25 GPa | 326 ksi | 1 mm/min; ISO 527 |
| 2.30 GPa | 334 ksi | 5 mm/min; ASTM D 638 | |
| 弯曲强度 | 82.0 MPa | 11900 psi | 2 mm/min; ISO 178 |
| 89.0 MPa | 12900 psi | 1.3 mm/min, 50 mm span; ASTM D 790 | |
| 弯曲模量 | 2.20 GPa | 319 ksi | 2 mm/min; ISO 178 |
| 2.30 GPa | 334 ksi | 1.3 mm/min, 50 mm span; ASTM D 790 | |
| 悬壁梁缺口冲击强度 | 4.30 J/cm
@Temperature -30.0 °C
|
8.06 ft-lb/in
@Temperature -22.0 °F
|
ASTM D 256 |
| 5.90 J/cm
@Temperature 23.0 °C
|
11.1 ft-lb/in
@Temperature 73.4 °F
|
ASTM D 256 | |
| 30.0 kJ/m2
@Temperature -30.0 °C
|
14.3 ft-lb/in2
@Temperature -22.0 °F
|
80*10*3; ISO 180/1A | |
| 65.0 kJ/m2
@Temperature 23.0 °C
|
30.9 ft-lb/in2
@Temperature 73.4 °F
|
80*10*3; ISO 180/1A | |
| 简支梁缺口冲击强度 | 3.00 J/cm2
@Temperature -30.0 °C
|
14.3 ft-lb/in2
@Temperature -22.0 °F
|
V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA |
| 6.50 J/cm2
@Temperature 23.0 °C
|
30.9 ft-lb/in2
@Temperature 73.4 °F
|
V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA | |
| 冲击试验 | 55.0 J
@Temperature 23.0 °C
|
40.6 ft-lb
@Temperature 73.4 °F
|
Instrumented Impact Total Energy; ASTM D 3763 |
| 67.0 J
@Temperature -30.0 °C
|
49.4 ft-lb
@Temperature -22.0 °F
|
Instrumented Impact Total Energy; ASTM D 3763 |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 体积电阻率 | = 1.00e 15 ohm-cm | = 1.00e 15 ohm-cm | IEC 60093 |
| 表面电阻 | = 1.00e 15 ohm | = 1.00e 15 ohm | ROA; IEC 60093 |
| 介电强度 | 17.0 kV/mm
@Thickness 3.20 mm
|
432 kV/in
@Thickness 0.126 in
|
in oil; IEC 60243-1 |
| 25.0 kV/mm
@Thickness 1.60 mm
|
635 kV/in
@Thickness 0.0630 in
|
in oil; IEC 60243-1 | |
| 35.0 kV/mm
@Thickness 0.800 mm
|
889 kV/in
@Thickness 0.0315 in
|
in oil; IEC 60243-1 |
温馨提示：
我司产品均可免费提供详细物性表(英文和中文版)、加工参数表、ROHS、SGS、MSDS、UL及FDA等认证相关资料；可免费为客户分析样版并提供原料型号咨询服务(可免费帮客户翻译英文资料)；如需试料、了解产品相关信息及当日报价，敬请来电、来邮或在线咨询，我们将竭诚为您服务！
郑重承诺:本公司所销售原料全部为原厂原包正牌料、杜绝一切副牌料、水口料以次充好。
