HDPE ALATHON M5010 

Alathon M5010 is a medium molecular weight high density polyethylene copolymer for use in blown film applications.

Regulatory Status: M5010 meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. This regulation allows for, among other things, the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Certain limitations or conditions of use may apply. Contact your Equistar sales representative for more information.

Certain recommendations for processing M5010 can only be made when the processing conditions, equipment and end use are provided; however, Equistar recommends that samples be produced and that users conduct their own testing in order to make their own independent determination that M5010 is suitable and safe for their intended use and applications.

This product is from the former Equistar product line.

Physical Properties	Metric	English	Comments
Density	0.947 g/cc	0.0342 lb/in3	ASTM D1505
Thickness	63.5 microns	2.50 mil
Melt Flow	1.0 g/10 min	1.0 g/10 min	ASTM D1238
Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	23.4 MPa	3400 psi	ASTM D882
Film Tensile Strength at Yield, TD	26.9 MPa	3900 psi	ASTM D882
Film Elongation at Break, MD	700 %	700 %	ASTM D882
Film Elongation at Break, TD	1000 %	1000 %	ASTM D882
Secant Modulus, MD	0.717 GPa	104 ksi	ASTM E111

HDPE ALATHON M5010 

基本特性：高密度聚乙烯是一种不透明白色腊状材料，比重比水轻，比重为0.941~0.960，柔软而且有韧性，但比LDPE略硬，也略能伸长，无毒，无味。

燃烧特性：易燃，离火后能继续燃烧，火焰上端呈黄色，下端呈蓝色，燃烧时会熔融，有液体滴落，无黑烟冒出，同时，发出石蜡燃烧时发出的气味。

主要优点：耐酸碱，耐有机溶剂，电绝缘性优良，低温时，仍能保持一定的韧性。表面硬度，拉伸强度，刚性等机械强度都高于LDPE，接近于PP，比PP韧，但表面光洁度不如PP。

主要缺点：机械性能差，透气差，易变形，易老化，易发脆，脆性低于PP，易应力开裂，表面硬度低，易刮伤。难印刷，印刷时，需进行表面放电处理，不能电镀，表面无光泽。

主要用途：

高密度聚乙烯树脂可采用注射、挤出、吹塑和旋转成型等方法成型塑料制品。采用注射成型可成型出各种类型的容器、工业配件、医用品、玩具、壳体、瓶塞和护罩等制品。采用吹塑成型可成型各种中空容器、超薄型薄膜等。采用挤出成型可成型管材、拉伸条带、捆扎带、单丝、电线和电缆护套等。

另外，还可成型建筑用装饰板、百叶窗、合成木材、合成纸、合成膜和成型钙塑制品等。

HDPE ALATHON M5010 我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！