苏州寅旭塑化有限公司
Zytel PLS95G35DH1 NC010(PRELIMINARY)
ZYTEL? PLUS NYLON RESIN
PA66/6T-GF35
CHARACTERISTICS
Processing
Injection Molding
Delivery form
Pellets
Additives
Release agent
Special characteristics
Heat stabilized or stable to heat
PRODUCT TEXT
Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.
The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Zytel? PLS95G35DH1 NC010 is a high flow, 35% glass fiber reinforced, DuPont? SHIELD protected polyamide resin for injection molding. It provides excellent surface appearance, excellent welding, excellent fatigue retention and exceptional resistance to hot air and hot oil.
PRODUCT INFORMATION
DRY/COND.
TEST NORM
Resin Identification
PA66/6T-GF35
ISO 1043
Part Marking Code
>PA66/6T-GF35<
ISO 11469
ISO designation
ISO 16396-PA66/6T,GF35,M1GHNR,S12-110
-
REGULATORY
Substance of Very High Concern Report
RHEOLOGICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Viscosity number
125/*
cm3/g
ISO 307, 1157, 1628
Molding shrinkage, parallel
0.1/-
%
ISO 294-4, 2577
Molding shrinkage, normal
0.6/-
%
ISO 294-4, 2577
MECHANICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Tensile Modulus
11000/8000
MPa
ISO 527-1/-2
Stress at break
209/148
MPa
ISO 527-1/-2
Strain at break
3.1/5.4
%
ISO 527-1/-2
Charpy impact strength, 73°F
80/100
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
12/14
kJ/m2
ISO 179/1eA
Ball indentation hardness, H 961/30
285/-
MPa
ISO 2039-1
Poisson's ratio
0.34/0.34
-
-
THERMAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
269/*
°C
ISO 11357-1/-3
Glass transition temperature, 18°F/min
65/-
°C
ISO 11357-1/-2
Temp. of deflection under load, 260 psi
249/*
°C
ISO 75-1/-2
FLAMMABILITY
DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
HB/*
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
25
mm/min
ISO 3795 (FMVSS 302)
ELECTRICAL PROPERTIES
DRY/COND.
TEST NORM
Comparative tracking index
600/-
IEC 60112
OTHER PROPERTIES
DRY/COND.
UNIT
TEST NORM
Humidity absorption, 80mil
1.8/*
%
Sim. to ISO 62
Water absorption, 80mil
6/*
%
Sim. to ISO 62
Density
1430/-
kg/m3
ISO 1183
INJECTION
DRY/COND.
UNIT
Drying Recommended
yes
Drying Temperature
80
°C
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
285
°C
Min. melt temperature
280
°C
Max. melt temperature
290
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
100
°C
Min. mold temperature
70
°C
Max. mold temperature
120
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm
Ejection temperature
210
°C
CHEMICAL MEDIA RESISTANCE
Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
