![2.jpg](https://image.51pla.com/uploadpic/20191025/1151/1571975513759835624919511.jpg)
SABIC HDPE M864SE
高密度聚乙烯
产品说明:
SABIC? HDPE M864SE is an UV stabilized, high density polyethylene injection moulding grade with a narrow molecular weight distribution. It is typically used for injection moulding applications where rigidity, toughness and warp resistance are required.
Typical applications.
SABIC? HDPE M864SE is typically used for the manufacture of injection moulded cases, crates, trays, industrial pails and other similar items.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
![150.jpg](https://img.51pla.com/uploadpm/2021/0317/1443/f761dd8388aa417d91cb108af3d83a84.jpg)
![HDPE.jpg HDPE.jpg](https://image.51pla.com/uploadpic/20191023/1335/1571808954683288459927843.jpg)
![7.jpg 7.jpg](https://image.51pla.com/uploadpic/20191023/1356/1571810200804714836661989.jpg)
SABIC HDPE M864SE 物性表
基本信息 |
|
添加剂 |
|
特性 |
- 高密度
- 抗弯曲
- 抗紫外线性能良好
- 韧性良好
- 窄分子量分布
- 中等硬度
|
用途 |
|
加工方法 |
|
物理性能 |
额定值 |
单位制 |
测试方法 |
密度 |
0.964 |
g/cm3 |
ISO 1183 |
熔流率(熔体流动速率) |
|
|
ISO 1133 |
190°C/2.16 kg |
8.0 |
g/10 min |
ISO 1133 |
190°C/5.0 kg |
22 |
g/10 min |
ISO 1133 |
抗环境应力开裂 1(60°C, 3.00 mm, Rhodacal-DS10, 模压成型) |
90.0 |
hr |
内部方法 |
硬度 |
额定值 |
单位制 |
测试方法 |
肖氏硬度 (邵氏 D, 模压成型) |
65 |
|
ISO 868 |
机械性能 |
额定值 |
单位制 |
测试方法 |
拉伸模量 (2.00 mm, 模压成型) |
1450 |
MPa |
ISO 527-2/1BA/50 |
拉伸应力 |
|
|
ISO 527-2/1BA/50 |
屈服, 2.00 mm, 模压成型 |
32.0 |
MPa |
ISO 527-2/1BA/50 |
断裂, 2.00 mm, 模压成型 |
15.0 |
MPa |
ISO 527-2/1BA/50 |
拉伸应变 (断裂, 2.00 mm, 模压成型) |
> 200 |
% |
ISO 527-2/1BA/50 |
弯曲模量 (2.00 mm, 模压成型) |
1700 |
MPa |
ISO 178 |
弯曲应力 (2.00 mm, 模压成型) |
32.0 |
MPa |
ISO 178 |
冲击性能 |
额定值 |
单位制 |
测试方法 |
悬壁梁缺口冲击强度 (23°C, 模压成型) |
4.0 |
kJ/m2 |
ISO 180/A |
热性能 |
额定值 |
单位制 |
测试方法 |
热变形温度 (0.45 MPa, 未退火) |
95.0 |
°C |
ISO 75-2/B |
维卡软化温度 |
129 |
°C |
ISO 306/A |
溶融温度(DSC) |
135 |
°C |
ISO 11357-3 |
Enthalpy Change |
229 |
J/g |
ISO 11357-3 |
注射 |
额定值 |
单位制 |
|
加工(熔体)温度 |
230 到 275 |
°C |
|
模具温度 |
32.0 到 38.0 |
°C |
|
注塑压力 |
69.0 到 89.0 |
MPa |
|
![物性表.jpg 物性表.jpg](https://image.51pla.com/uploadpic/20191025/1153/157197563797579942705848.jpg)