苏州腾旺国际贸易有限公司
DuPont Performance Polymers Zytel? FN714 NC010A Nylon 66
Polymer,Thermoplastic,Nylon,Nylon 66
DuPont Performance Polymers
产品说明:
Zytel? FN714 NC010A is an impact modified, very flexible, plasticizer free polyamide 66 resin having good heat aging and chemical resistance.
Information provided by DuPont Performance Polymers
DuPont Performance Polymers Zytel? FN714 NC010A Nylon 66 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.02 g/cc | 0.0368 lb/in3 | DAM; ISO 1183 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(断裂) | 29.0 MPa
@Temperature 23.0 °C
|
4210 psi
@Temperature 73.4 °F
|
DAM; ISO 527 |
| 抗张强度(屈服) | 29.0 MPa
@Temperature 23.0 °C
|
4210 psi
@Temperature 73.4 °F
|
DAM; ISO 527 |
| 伸长率 (断裂) | >= 50 %
@Temperature 23.0 °C
|
>= 50 %
@Temperature 73.4 °F
|
DAM; nominal; ISO 527 |
| 190 %
@Temperature 23.0 °C
|
190 %
@Temperature 73.4 °F
|
DAM; nominal; ISO 527 | |
| 220 %
@Temperature 23.0 °C
|
220 %
@Temperature 73.4 °F
|
DAM; ISO 527 | |
| 拉伸模量 | 0.475 GPa
@Temperature 23.0 °C
|
68.9 ksi
@Temperature 73.4 °F
|
DAM; ISO 527 |
| 弯曲模量 | 0.575 GPa
@Temperature 23.0 °C
|
83.4 ksi
@Temperature 73.4 °F
|
DAM; ISO 178 |
| 悬壁梁缺口冲击强度 | NB
@Temperature 23.0 °C
|
NB
@Temperature 73.4 °F
|
DAM; ISO 180/1A |
| 简支梁缺口冲击强度 | 9.50 J/cm2
@Temperature 23.0 °C
|
45.2 ft-lb/in2
@Temperature 73.4 °F
|
DAM; ISO 179/1eA |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 熔融温度 | 263 °C | 505 °F | 10°C/min; DAM; ISO 11357-1/-3 |
| 载荷下热变形温度(0.46 MPa) | 55.0 °C | 131 °F | DAM; ISO 75-1/-2 |
| 载荷下热变形温度(1.8 MPa) | 45.0 °C | 113 °F | DAM; ISO 75-1/-2 |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工（熔体）温度 | 285 °C | 545 °F | DAM; Optimum; Extrusion |
| 285 °C | 545 °F | DAM; Optimum; Injection Molding | |
| 275 - 295 °C | 527 - 563 °F | DAM; Extrusion | |
| 275 - 295 °C | 527 - 563 °F | DAM; Injection Molding | |
| 模具温度 | 60.0 °C | 140 °F | DAM; optimum; Injection Molding |
| 40.0 - 80.0 °C | 104 - 176 °F | DAM; Injection Molding | |
| 干燥温度 | 80.0 °C | 176 °F | DAM; Extrusion |
| 80.0 °C | 176 °F | DAM; Injection Molding | |
| 干燥时间 | 2.00 - 4.00 hour | 2.00 - 4.00 hour | DAM; Injection Molding |
| 4.00 - 6.00 hour | 4.00 - 6.00 hour | DAM; Extrusion | |
| 水分含量 | <= 0.050 % | <= 0.050 % | DAM; Extrusion |
| <= 0.20 % | <= 0.20 % | DAM; Injection Molding |
| 材料描述 | 测试方法 | |
|---|---|---|
| 外观 | Natural Color | DAM |
| 特性 | Chemical Resistance, Good | DAM |
| Chemical Resistance, Good | DAM | |
| Flexibility, Good | DAM | |
| Flexibility, Good | DAM | |
| Heat Aging Resistance, Good | DAM | |
| Heat Aging Resistance, Good | DAM | |
| Impact Modified | DAM | |
| Impact Modified | DAM | |
| 形式 | Pellets | DAM |
| Generic | Nylon 66 | DAM |
| Material Status | Current | DAM |
| 部件标识代码 | >PA66-F< | ISO 11469; DAM |
| 加工方法 | Injection Molding | DAM |
| 产品分类 | Toughened Resins | DAM |
| Unreinforced Resins | DAM | |
| Region Available - Global | Yes | DAM |
| 树脂识别 | PA66-F | ISO 1043; DAM |
| 符合RoHS指令 | Contact Manufacturer | DAM |
