苏州寅旭塑化有限公司
Zytel? FR7026V0F BK001
NYLON RESIN
PA66 FR(30)
CHARACTERISTICS
Processing
Injection Molding
Delivery form
Pellets
Additives
Release agent, Flame retardant
Special characteristics
Flame retardant
PRODUCT TEXT
Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.
The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Zytel? FR7026V0F BK001is an unreinforced, flame retardant, heat stabilized, polyamide 66 resin for injection molding. It does not contain elemental phosphorous or heavy metals and uses an halogen free flame retardant package. Non-Chlorine & Non-Bromine Material. Compliant with UL 746H/C-IC
PRODUCT INFORMATION
DRY/COND.
TEST NORM
Resin Identification
PA66-FR(30)
ISO 1043
Part Marking Code
>PA66-FR(30)<
ISO 11469
ISO designation
ISO 16396-PA66,FR(30),M1CF1G1R,S14-040
-
REGULATORY
Substance of Very High Concern Report
RHEOLOGICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Molding shrinkage, parallel
0.9/-
%
ISO 294-4, 2577
Molding shrinkage, normal
1.0/-
%
ISO 294-4, 2577
MECHANICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Tensile Modulus
3700/2000
MPa
ISO 527-1/-2
Yield stress
*/55
MPa
ISO 527-1/-2
Yield strain
*/20
%
ISO 527-1/-2
Stress at break
80/*
MPa
ISO 527-1/-2
Nominal strain at break
*/30
%
ISO 527-1/-2
Strain at break
2.5/*
%
ISO 527-1/-2
Charpy impact strength, 73°F
80/110
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
3.2/7
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -22°F
3/2
kJ/m2
ISO 179/1eA
Izod notched impact strength, 73°F
4.4/-
kJ/m2
ISO 180/1A
Ball indentation hardness, H 358/30
-/110
MPa
ISO 2039-1
Poisson's ratio
0.36/0.4
-
-
THERMAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
260/*
°C
ISO 11357-1/-3
Temp. of deflection under load, 260 psi
80/*
°C
ISO 75-1/-2
Temp. of deflection under load, 65 psi
230/*
°C
ISO 75-1/-2
Ball pressure test
220/-DS
°C
IEC 60695-10-2
Thermal conductivity of melt
0.17
W/(m K)
-
Spec. heat capacity of melt
2590
J/(kg K)
-
RTI, electrical, 30mil
130
°C
UL 746B
RTI, electrical, 60mil
130
°C
UL 746B
RTI, electrical, 120mil
130
°C
UL 746B
RTI, impact, 30mil
95
°C
UL 746B
RTI, impact, 60mil
95
°C
UL 746B
RTI, impact, 120mil
95
°C
UL 746B
RTI, strength, 30mil
110
°C
UL 746B
RTI, strength, 60mil
110/*
°C
UL 746B
RTI, strength, 120mil
110
°C
UL 746B
DS: Derived from similar grade
FLAMMABILITY
DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
V-0/*
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
Burning Behav. at thickness h
V-0/*
class
IEC 60695-11-10
Thickness tested
0.82/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
Oxygen index
39/*
%
ISO 4589-1/-2
Glow Wire Flammability Index, 15mil
960/-
°C
IEC 60695-2-12
Glow Wire Flammability Index, 30mil
960/-
°C
IEC 60695-2-12
Glow Wire Flammability Index, 60mil
960/-
°C
IEC 60695-2-12
Glow Wire Flammability Index, 120mil
960/-
°C
IEC 60695-2-12
Glow Wire Ignition Temperature, 30mil
960/-
°C
IEC 60695-2-13
Glow Wire Ignition Temperature, 15mil
960/-
°C
IEC 60695-2-12
Glow Wire Ignition Temperature, 60mil
960/-
°C
IEC 60695-2-13
Glow Wire Ignition Temperature, 120mil
960/-
°C
IEC 60695-2-13
FMVSS Class
DNIDS
-
ISO 3795 (FMVSS 302)
DS: Derived from similar grade
ELECTRICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Surface resistivity
*/>1E15
Ohm
IEC 62631-3-2
Electric strength
31/-
kV/mm
IEC 60243-1
Comparative tracking index
600/-
-
IEC 60112
Comparative tracking index
0/-
PLC
UL 746A
OTHER PROPERTIES
DRY/COND.
UNIT
TEST NORM
Humidity absorption, 80mil
2.5/*
%
Sim. to ISO 62
Water absorption, 80mil
8/*
%
Sim. to ISO 62
Density
1160/-
kg/m3
ISO 1183
Water Absorption, Immersion 24h
1.8/*1
%
Sim. to ISO 62
1: wall thickness 2mm
INJECTION
DRY/COND.
UNIT
Drying Recommended
yes
Drying Temperature
80
°C
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
280
°C
Min. melt temperature
270
°C
Max. melt temperature
290
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
70
°C
Min. mold temperature
50
°C
Max. mold temperature
90
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm
Ejection temperature
210
°C
CHEMICAL MEDIA RESISTANCE
Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
Hydrochloric Acid (36% by mass), 23°C
Nitric Acid (40% by mass), 23°C
Sulfuric Acid (38% by mass), 23°C
Sulfuric Acid (5% by mass), 23°C
Chromic Acid solution (40% by mass), 23°C
Bases
Sodium Hydroxide solution (35% by mass), 23°C
Sodium Hydroxide solution (1% by mass), 23°C
Ammonium Hydroxide solution (10% by mass), 23°C
Alcohols
Isopropyl alcohol, 23°C
Methanol, 23°C
Ethanol, 23°C
Hydrocarbons
n-Hexane, 23°C
Toluene, 23°C
iso-Octane, 23°C
Ketones
Acetone, 23°C
Ethers
Diethyl ether, 23°C
Mineral oils
SAE 10W40 multigrade motor oil, 23°C
SAE 10W40 multigrade motor oil, 130°C
SAE 80/90 hypoid-gear oil, 130°C
Insulating Oil, 23°C
Standard Fuels
ISO 1817 Liquid 1 - E5, 60°C
ISO 1817 Liquid 2 - M15E4, 60°C
ISO 1817 Liquid 3 - M3E7, 60°C
ISO 1817 Liquid 4 - M15, 60°C
Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C
Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 90°C
Diesel fuel (pref. ISO 1817 Liquid F), >90°C
Salt solutions
Sodium Chloride solution (10% by mass), 23°C
Sodium Hypochlorite solution (10% by mass), 23°C
Sodium Carbonate solution (20% by mass), 23°C
Sodium Carbonate solution (2% by mass), 23°C
Zinc Chloride solution (50% by mass), 23°C
Other
Ethyl Acetate, 23°C
Hydrogen peroxide, 23°C
DOT No. 4 Brake fluid, 130°C
Ethylene Glycol (50% by mass) in water, 108°C
1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C
50% Oleic acid + 50% Olive Oil, 23°C
Water, 23°C
Water, 90°C
Phenol solution (5% by mass), 23°C
