商品 详情
供应杜邦pa66+pa6 共聚尼龙 74G33J 33%玻纤增强 高刚性

¥ 25

  • ≥ 25 起订量
  • 10000 KG 总供应
  • 江苏 苏州 所在地
苏州寅旭塑化有限公司
产品详情

Zytel? 74G33J NC010

NYLON RESIN
(PA66+PA6)-GF33
CHARACTERISTICS
Regional availability
Processing
Injection Molding
PRODUCT TEXT

Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

 

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

 

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Zytel? 74G33J NC010 is a 33% glass reinforced nylon 66 and nylon 6 comelt resin.

PRODUCT INFORMATION

DRY/COND.
TEST NORM
Resin Identification
PA66+PA6-GF33
ISO 1043
Part Marking Code
>PA66+PA6-GF33<
ISO 11469
ISO designation
ISO 16396-(PA66+PA6),GF33,M1GN,S14-100
-

REGULATORY

Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Molding shrinkage, parallel
0.2/-
%
ISO 294-4, 2577
Molding shrinkage, normal
0.8/-
%
ISO 294-4, 2577

MECHANICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Tensile Modulus
10000/-
MPa
ISO 527-1/-2
Stress at break
185/-
MPa
ISO 527-1/-2
Strain at break
3.5/-
%
ISO 527-1/-2
Flexural Modulus
-/5000
MPa
ISO 178
Charpy impact strength, 73°F
95/-
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
14/-
kJ/m2
ISO 179/1eA
Izod notched impact strength, -40°F
10/10
kJ/m2
ISO 180/1A
Poisson's ratio
0.34/-
-
-

THERMAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
250/*
°C
ISO 11357-1/-3
Temp. of deflection under load, 260 psi
220/*
°C
ISO 75-1/-2
RTI, electrical, 30mil
65
°C
UL 746B
RTI, electrical, 60mil
65
°C
UL 746B
RTI, electrical, 120mil
65
°C
UL 746B
RTI, impact, 30mil
65
°C
UL 746B
RTI, impact, 60mil
65
°C
UL 746B
RTI, impact, 120mil
65
°C
UL 746B
RTI, strength, 30mil
65
°C
UL 746B
RTI, strength, 60mil
65/*
°C
UL 746B
RTI, strength, 120mil
65
°C
UL 746B

FLAMMABILITY

DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
HB/*
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
Burning Behav. at thickness h
HB/*
class
IEC 60695-11-10
Thickness tested
0.81/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
<80
mm/min
ISO 3795 (FMVSS 302)

OTHER PROPERTIES

DRY/COND.
UNIT
TEST NORM
Density
1390/-
kg/m3
ISO 1183

INJECTION

DRY/COND.
UNIT
Drying Recommended
yes
Drying Temperature
80
°C
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
290
°C
Min. melt temperature
280
°C
Max. melt temperature
300
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
100
°C
Min. mold temperature
70
°C
Max. mold temperature
120
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm
Ejection temperature
210
°C

CHEMICAL MEDIA RESISTANCE

Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
Hydrochloric Acid (36% by mass), 23°C
Nitric Acid (40% by mass), 23°C
Sulfuric Acid (38% by mass), 23°C
Sulfuric Acid (5% by mass), 23°C
Chromic Acid solution (40% by mass), 23°C
Bases
Sodium Hydroxide solution (35% by mass), 23°C
Sodium Hydroxide solution (1% by mass), 23°C
Ammonium Hydroxide solution (10% by mass), 23°C
Alcohols
Isopropyl alcohol, 23°C
Methanol, 23°C
Ethanol, 23°C
Hydrocarbons
n-Hexane, 23°C
Toluene, 23°C
iso-Octane, 23°C
Ketones
Acetone, 23°C
Ethers
Diethyl ether, 23°C
Mineral oils
SAE 10W40 multigrade motor oil, 23°C
SAE 10W40 multigrade motor oil, 130°C
SAE 80/90 hypoid-gear oil, 130°C
Insulating Oil, 23°C
Standard Fuels
ISO 1817 Liquid 1 - E5, 60°C
ISO 1817 Liquid 2 - M15E4, 60°C
ISO 1817 Liquid 3 - M3E7, 60°C
ISO 1817 Liquid 4 - M15, 60°C
Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C
Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 90°C
Diesel fuel (pref. ISO 1817 Liquid F), >90°C
Salt solutions
Sodium Chloride solution (10% by mass), 23°C
Sodium Hypochlorite solution (10% by mass), 23°C
Sodium Carbonate solution (20% by mass), 23°C
Sodium Carbonate solution (2% by mass), 23°C
Zinc Chloride solution (50% by mass), 23°C
Other
Ethyl Acetate, 23°C
Hydrogen peroxide, 23°C
DOT No. 4 Brake fluid, 130°C
Ethylene Glycol (50% by mass) in water, 108°C
1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C
50% Oleic acid + 50% Olive Oil, 23°C
Water, 23°C
Water, 90°C
Phenol solution (5% by mass), 23°C


首页 塑料原料 / PA6 / PA6
相关产品
店内推荐
首页
店铺
拨打电话 立即报价
发送询价单
采购商品:
采购数量:
联系信息:
公司名称:
采购说明:
 
您的询盘第一时间将不发送给其他供应商,但该供应商24 小时未响应情况下,仍将为您分配更合适供应商
图形验证:
图形验证码 换一换
验证码校验