商品 详情
供应杜邦73G35HSL BK262 35%玻纤增强PA6

¥ 25

  • ≥ 25 起订量
  • 10000 KG 总供应
  • 江苏 苏州 所在地
苏州寅旭塑化有限公司
全部商品 进入店铺
产品详情

Zytel? 73G35HSL BK262

NYLON RESIN
PA6-GF35
CHARACTERISTICS
Processing
Injection Molding
Delivery form
Pellets
Additives
Lubricants, Release agent
Special characteristics
Heat stabilized or stable to heat
PRODUCT TEXT

Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

 

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

 

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

 

Zytel? 73G35HSL BK262 is a 35% glass fiber reinforced, heat stabilized, black polyamide 6 resin for injection molding.

 

PRODUCT INFORMATION

DRY/COND.
TEST NORM
Resin Identification
PA6-GF35
ISO 1043
Part Marking Code
>PA6-GF35<
ISO 11469
ISO designation
ISO 16396-PA6,GF35,M1CGHR,S14-110
-

REGULATORY

Regulatory Information Sheet (RIS)
SVHC Declaration
ZYTEL - SVHC Statement
Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Viscosity number
143/*
cm3/g
ISO 307, 1157, 1628
Molding shrinkage, parallel
0.1/-
%
ISO 294-4, 2577
Molding shrinkage, normal
0.6/-
%
ISO 294-4, 2577

MECHANICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Tensile Modulus
11000/6500
MPa
ISO 527-1/-2
Stress at break
190/120
MPa
ISO 527-1/-2
Strain at break
3.2/6
%
ISO 527-1/-2
Flexural Modulus
9500/6000
MPa
ISO 178
Flexural Strength
280/150
MPa
ISO 178
Tensile creep modulus, 1h
*/6000DS
MPa
ISO 899-1
Tensile creep modulus, 1000h
*/5000DS
MPa
ISO 899-1
Charpy impact strength, 73°F
85/90
kJ/m2
ISO 179/1eU
Charpy impact strength, -22°F
90/90
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
14/22
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -22°F
10/10
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°C
11/12
kJ/m2
ISO 179/1eA
Puncture energy, 73°F
3/6
J
ISO 6603-2
Izod notched impact strength, 73°F
13/20
kJ/m2
ISO 180/1A
Poisson's ratio
0.34/0.35
-
-
DS: Derived from similar grade

THERMAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
221/*
°C
ISO 11357-1/-3
Glass transition temperature, 18°F/min
55/-
°C
ISO 11357-1/-2
Temp. of deflection under load, 260 psi
208/*
°C
ISO 75-1/-2
Temp. of deflection under load, 65 psi
220/*
°C
ISO 75-1/-2
Vicat softening temperature, 90°F/h, 11 lbf
215/*
°C
ISO 306
Coeff. of linear therm. expansion, parallel
19/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
100/*
E-6/K
ISO 11359-1/-2
RTI, electrical, 60mil
65
°C
UL 746B
RTI, impact, 60mil
65
°C
UL 746B
RTI, strength, 60mil
65/*
°C
UL 746B

FLAMMABILITY

DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
HB/*
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
24
mm/min
ISO 3795 (FMVSS 302)

OTHER PROPERTIES

DRY/COND.
UNIT
TEST NORM
Humidity absorption, 80mil
2.1/*
%
Sim. to ISO 62
Water absorption, 80mil
5.8/*
%
Sim. to ISO 62
Density
1410/-
kg/m3
ISO 1183
Water Absorption, Immersion 24h
1/*1
%
Sim. to ISO 62
1: wall thickness 3mm

INJECTION

DRY/COND.
UNIT
Drying Recommended
yes
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
270
°C
Min. melt temperature
260
°C
Max. melt temperature
280
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
100
°C
Min. mold temperature
70
°C
Max. mold temperature
120
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm

CHEMICAL MEDIA RESISTANCE

Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
Hydrochloric Acid (36% by mass), 23°C
Nitric Acid (40% by mass), 23°C
Sulfuric Acid (38% by mass), 23°C
Sulfuric Acid (5% by mass), 23°C
Chromic Acid solution (40% by mass), 23°C
Bases
Sodium Hydroxide solution (35% by mass), 23°C
Sodium Hydroxide solution (1% by mass), 23°C
Ammonium Hydroxide solution (10% by mass), 23°C
Alcohols
Isopropyl alcohol, 23°C
Methanol, 23°C
Ethanol, 23°C
Hydrocarbons
n-Hexane, 23°C
Toluene, 23°C
iso-Octane, 23°C
Ketones
Acetone, 23°C
Ethers
Diethyl ether, 23°C
Mineral oils
SAE 10W40 multigrade motor oil, 23°C
SAE 10W40 multigrade motor oil, 130°C
SAE 80/90 hypoid-gear oil, 130°C
Insulating Oil, 23°C
Motor oil OS206 304 Ref.Eng.Oil, ISP, 135°C
Automatic hypoid-gear oil Shell Donax TX, 135°C
Standard Fuels
ISO 1817 Liquid 1 - E5, 60°C
ISO 1817 Liquid 2 - M15E4, 60°C
ISO 1817 Liquid 3 - M3E7, 60°C
ISO 1817 Liquid 4 - M15, 60°C
Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C
Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 90°C
Diesel fuel (pref. ISO 1817 Liquid F), >90°C
Salt solutions
Sodium Chloride solution (10% by mass), 23°C
Sodium Hypochlorite solution (10% by mass), 23°C
Sodium Carbonate solution (20% by mass), 23°C
Sodium Carbonate solution (2% by mass), 23°C
Zinc Chloride solution (50% by mass), 23°C
Other
Ethyl Acetate, 23°C
Hydrogen peroxide, 23°C
DOT No. 4 Brake fluid, 130°C
Ethylene Glycol (50% by mass) in water, 108°C
1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C
50% Oleic acid + 50% Olive Oil, 23°C
Water, 23°C
Water, 90°C
Phenol solution (5% by mass), 23°C

DIAGRAMS

Viscosity-shear rate Zytel? 73G35HSL BK262 1E2 1E3 1E4 Shear rate in 1/s 1E1 1E2 1E3 Viscosity in Pa.s 260 °C 270 °C 280 °C 290 °C 300 °C
Shearstress-shear rate Zytel? 73G35HSL BK262 1E2 1E3 1E4 Shear rate in 1/s 1E4 1E5 1E6 Shearstress in Pa 260 °C 270 °C 280 °C 290 °C 300 °C
Dynamic Tensile modulus-temperature Zytel? 73G35HSL BK262 (dry) -100 0 100 200 Temperature in °C 1E0 1E1 1E2 1E3 1E4 1E5 Dyn. Tensile modulus in MPa 0 0.02 0.04 0.06 0.08 0.1 tan d 1E-2 1E-1 1E0 1E1 1E2 1E3 E'' MPa
Stress-strain Zytel? 73G35HSL BK262 (dry) B - Break 0 5 10 15 Strain in % 0 100 200 300 Stress in MPa B B B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C 180 °C 200 °C
Stress-strain Zytel? 73G35HSL BK262 (cond.) B - Break 0 2 4 6 8 Strain in % 0 100 200 300 Stress in MPa B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Secant modulus-strain Zytel? 73G35HSL BK262 (dry) B - Break 0 5 10 15 Strain in % 0 5000 10000 15000 Secant modulus in MPa B B B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C 180 °C 200 °C
Secant modulus-strain Zytel? 73G35HSL BK262 (cond.) B - Break 0 2 4 6 8 Strain in % 0 5000 10000 15000 Secant modulus in MPa B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Stress-strain (isochronous) 23 °C Zytel? 73G35HSL BK262 (cond.) 0 1 2 3 Strain in % 0 20 40 60 Stress in MPa 1 h 10 h 100 h 1000 h 10000 h
Creep modulus-time 23 °C Zytel? 73G35HSL BK262 (cond.) 1E0 1E1 1E2 1E3 1E4 Time in h 2000 3000 4000 5000 6000 Creep modulus in MPa 10 MPa 20 MPa 30 MPa 40 MPa 50 MPa 55 MPa
Stress-strain (isochronous) 150 °C Zytel? 73G35HSL BK262 (dry) 0 1 2 3 4 Strain in % 0 10 20 30 40 50 Stress in MPa 1 h 10 h 100 h 1000 h
Creep modulus-time 150 °C Zytel? 73G35HSL BK262 (dry) 1E0 1E1 1E2 1E3 Time in h 1000 1500 2000 2500 Creep modulus in MPa 5 MPa 10 MPa 15 MPa 20 MPa 25 MPa 30 MPa 35 MPa 40 MPa
Tensile modulus-temperature Zytel? 73G35HSL BK262 (dry) -100 0 100 200 Temperature in °C 1E3 1E4 1E5 Tensile modulus in MPa
Tensile modulus-temperature Zytel? 73G35HSL BK262 (cond.) -50 0 50 100 150 Temperature in °C 1E3 1E4 1E5 Tensile modulus in MPa
Coeff. of linear thermal expansion Zytel? 73G35HSL BK262 -100 0 100 200 Temperature in °C 12 14 16 18 20 22 CLTEp in E-6/K -50 0 50 100 150 200 CLTEn in E-6/K
Tensile Fatigue, 10Hz, R=0.1 @ 4 mm Zytel? 73G35HSL BK262 (cond.) 1E2 1E3 1E4 1E5 1E6 1E7 Cycles 40 50 60 70 80 Stress in MPa 150 °C
LTHA-Stress at Break 4 mm Zytel? 73G35HSL BK262 0 2000 4000 6000 8000 Time in h 0 50 100 150 200 StressB in MPa 140 °C 180 °C 190 °C 210 °C
LTHA-Strain at Break 4 mm Zytel? 73G35HSL BK262 0 2000 4000 6000 8000 Time in h 0 1 2 3 4 StrainB in % 140 °C 180 °C 190 °C 210 °C

首页 塑料原料 / PA6 / PA6
相关产品
店内推荐
首页
店铺
拨打电话 立即报价
发送询价单
采购商品:
采购数量:
吨
联系信息:
公司名称:
采购说明:
 
您的询盘第一时间将不发送给其他供应商，但该供应商24 小时未响应情况下，仍将为您分配更合适供应商
图形验证:
图形验证码 换一换
验证码校验