苏州寅旭塑化有限公司
Zytel尼龙树脂的共同特点包括机械和物理性能，如高机械强度，优良的刚度和韧性平衡，良好的高温性能，良好的电气和易燃性，良好的耐磨性和耐化学性。此外，Zytel尼龙树脂有不同的改性和增强等级，为特定的工艺和最终用途创造了各种各样的产品。Zytel尼龙树脂，包括大多数阻燃等级，提供着色能力。Zytel尼龙树脂具有良好的熔体稳定性，正常情况下可以回收处理得当的生产废料。如果不能回收利用，杜邦建议，作为首选选择，焚化与能量回收(-31kJ/g碱性聚合物)在适当装备的设施。对于处置，必须遵守当地的规定。Zytel尼龙树脂通常用于苛刻的应用在汽车，家具，家用电器，体育用品和建筑行
70G13L Zytel? 70G13L是13%玻璃纤维增强聚酰胺66树脂注塑。颜色有本色NC010 和黑色
Zytel? 70G13L NC010
NYLON RESIN
PA66-GF13
CHARACTERISTICS
Processing
Injection Molding
Delivery form
Granules
Additives
Lubricants, Release agent
PRODUCT TEXT
Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.
The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Zytel? 70G13L is a 13% glass fiber reinforced polyamide 66 resin for injection molding.
CHARACTERISTICS
Processing
Injection Molding
Delivery form
Granules
Additives
Lubricants, Release agent
PRODUCT TEXT
Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.
The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Zytel? 70G13L is a 13% glass fiber reinforced polyamide 66 resin for injection molding.
PRODUCT INFORMATION
DRY/COND.
TEST NORM
Resin Identification
PA66-GF13
ISO 1043
Part Marking Code
>PA66-GF13<
ISO 11469
ISO designation
ISO 16396-PA66,GF13,M1GNR,S14-050
-
DRY/COND.
TEST NORM
Resin Identification
PA66-GF13
ISO 1043
Part Marking Code
>PA66-GF13<
ISO 11469
ISO designation
ISO 16396-PA66,GF13,M1GNR,S14-050
-
REGULATORY
Substance of Very High Concern Report
Substance of Very High Concern Report
RHEOLOGICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Molding shrinkage, parallel
0.7/-
%
ISO 294-4, 2577
Molding shrinkage, normal
1.2/-
%
ISO 294-4, 2577
DRY/COND.
UNIT
TEST NORM
Molding shrinkage, parallel
0.7/-
%
ISO 294-4, 2577
Molding shrinkage, normal
1.2/-
%
ISO 294-4, 2577
MECHANICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Tensile Modulus
5500/3500
MPa
ISO 527-1/-2
Stress at break
120/75
MPa
ISO 527-1/-2
Strain at break
3/13
%
ISO 527-1/-2
Flexural Modulus
4800/2900
MPa
ISO 178
Flexural Stress at 3.5%
165/90
MPa
ISO 178
Tensile creep modulus, 1h
*/3300
MPa
ISO 899-1
Tensile creep modulus, 1000h
*/2200
MPa
ISO 899-1
Charpy impact strength, 73°F
40/70
kJ/m2
ISO 179/1eU
Charpy impact strength, -22°F
40/30
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
5/6
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -22°F
4.5/4
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°F
4.5/4
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°C
4.5/4
kJ/m2
ISO 179/1eA
Izod notched impact strength, 73°F
4.5/4
kJ/m2
ISO 180/1A
Izod notched impact strength, -22°F
4.5/3
kJ/m2
ISO 180/1A
Izod notched impact strength, -40°F
4.5/3
kJ/m2
ISO 180/1A
Izod impact strength, 73°F
40/55
kJ/m2
ISO 180/1U
Izod impact strength, -22°F
35/28
kJ/m2
ISO 180/1U
Poisson's ratio
0.35/0.37
-
-
Abrasion resistance
10/*
mm3
ISO 4649
DRY/COND.
UNIT
TEST NORM
Tensile Modulus
5500/3500
MPa
ISO 527-1/-2
Stress at break
120/75
MPa
ISO 527-1/-2
Strain at break
3/13
%
ISO 527-1/-2
Flexural Modulus
4800/2900
MPa
ISO 178
Flexural Stress at 3.5%
165/90
MPa
ISO 178
Tensile creep modulus, 1h
*/3300
MPa
ISO 899-1
Tensile creep modulus, 1000h
*/2200
MPa
ISO 899-1
Charpy impact strength, 73°F
40/70
kJ/m2
ISO 179/1eU
Charpy impact strength, -22°F
40/30
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
5/6
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -22°F
4.5/4
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°F
4.5/4
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°C
4.5/4
kJ/m2
ISO 179/1eA
Izod notched impact strength, 73°F
4.5/4
kJ/m2
ISO 180/1A
Izod notched impact strength, -22°F
4.5/3
kJ/m2
ISO 180/1A
Izod notched impact strength, -40°F
4.5/3
kJ/m2
ISO 180/1A
Izod impact strength, 73°F
40/55
kJ/m2
ISO 180/1U
Izod impact strength, -22°F
35/28
kJ/m2
ISO 180/1U
Poisson's ratio
0.35/0.37
-
-
Abrasion resistance
10/*
mm3
ISO 4649
THERMAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
262/*
°C
ISO 11357-1/-3
Glass transition temperature, 18°F/min
80/-
°C
ISO 11357-1/-2
Temp. of deflection under load, 260 psi
235/*
°C
ISO 75-1/-2
Temp. of deflection under load, 65 psi
255/*
°C
ISO 75-1/-2
Vicat softening temperature, 90°F/h, 11 lbf
205/*
°C
ISO 306
Ball pressure test
220/-
°C
IEC 60695-10-2
Coeff. of linear therm. expansion, parallel
40/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
93/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Normal, -40-23°C
77/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Normal, 55-160°C
149/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Parallel, -40-23°C
42/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Parallel, 55-160°C
26/*
E-6/K
ISO 11359-1/-2
RTI, electrical, 30mil
125
°C
UL 746B
RTI, electrical, 60mil
125
°C
UL 746B
RTI, electrical, 120mil
125
°C
UL 746B
RTI, impact, 30mil
120
°C
UL 746B
RTI, impact, 60mil
120
°C
UL 746B
RTI, impact, 120mil
120
°C
UL 746B
RTI, strength, 30mil
125
°C
UL 746B
RTI, strength, 60mil
125/*
°C
UL 746B
RTI, strength, 120mil
125
°C
UL 746B
DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
262/*
°C
ISO 11357-1/-3
Glass transition temperature, 18°F/min
80/-
°C
ISO 11357-1/-2
Temp. of deflection under load, 260 psi
235/*
°C
ISO 75-1/-2
Temp. of deflection under load, 65 psi
255/*
°C
ISO 75-1/-2
Vicat softening temperature, 90°F/h, 11 lbf
205/*
°C
ISO 306
Ball pressure test
220/-
°C
IEC 60695-10-2
Coeff. of linear therm. expansion, parallel
40/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
93/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Normal, -40-23°C
77/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Normal, 55-160°C
149/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Parallel, -40-23°C
42/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, Parallel, 55-160°C
26/*
E-6/K
ISO 11359-1/-2
RTI, electrical, 30mil
125
°C
UL 746B
RTI, electrical, 60mil
125
°C
UL 746B
RTI, electrical, 120mil
125
°C
UL 746B
RTI, impact, 30mil
120
°C
UL 746B
RTI, impact, 60mil
120
°C
UL 746B
RTI, impact, 120mil
120
°C
UL 746B
RTI, strength, 30mil
125
°C
UL 746B
RTI, strength, 60mil
125/*
°C
UL 746B
RTI, strength, 120mil
125
°C
UL 746B
FLAMMABILITY
DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
HB/*
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
Burning Behav. at thickness h
HB/*
class
IEC 60695-11-10
Thickness tested
0.71/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
Oxygen index
24/*
%
ISO 4589-1/-2
Glow Wire Flammability Index, 30mil
650/-
°C
IEC 60695-2-12
Glow Wire Flammability Index, 60mil
650/-
°C
IEC 60695-2-12
Glow Wire Flammability Index, 120mil
800/-
°C
IEC 60695-2-12
Glow Wire Ignition Temperature, 30mil
675/-
°C
IEC 60695-2-13
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
27
mm/min
ISO 3795 (FMVSS 302)
DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
HB/*
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
Burning Behav. at thickness h
HB/*
class
IEC 60695-11-10
Thickness tested
0.71/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
Oxygen index
24/*
%
ISO 4589-1/-2
Glow Wire Flammability Index, 30mil
650/-
°C
IEC 60695-2-12
Glow Wire Flammability Index, 60mil
650/-
°C
IEC 60695-2-12
Glow Wire Flammability Index, 120mil
800/-
°C
IEC 60695-2-12
Glow Wire Ignition Temperature, 30mil
675/-
°C
IEC 60695-2-13
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
27
mm/min
ISO 3795 (FMVSS 302)
ELECTRICAL PROPERTIES
DRY/COND.
UNIT
TEST NORM
Relative permittivity, 100Hz
3.9/-
-
IEC 62631-2-1
Relative permittivity, 1MHz
3.2/-
-
IEC 62631-2-1
Dissipation factor, 100Hz
130/-
E-4
IEC 62631-2-1
Dissipation factor, 1MHz
150/-
E-4
IEC 62631-2-1
Volume resistivity
>1E13/-
Ohm.m
IEC 62631-3-1
Surface resistivity
*/1E15
Ohm
IEC 62631-3-2
Electric strength
25/-
kV/mm
IEC 60243-1
Electric Strength, Short Time, 2mm
25/-
kV/mm
IEC 60243-1
DRY/COND.
UNIT
TEST NORM
Relative permittivity, 100Hz
3.9/-
-
IEC 62631-2-1
Relative permittivity, 1MHz
3.2/-
-
IEC 62631-2-1
Dissipation factor, 100Hz
130/-
E-4
IEC 62631-2-1
Dissipation factor, 1MHz
150/-
E-4
IEC 62631-2-1
Volume resistivity
>1E13/-
Ohm.m
IEC 62631-3-1
Surface resistivity
*/1E15
Ohm
IEC 62631-3-2
Electric strength
25/-
kV/mm
IEC 60243-1
Electric Strength, Short Time, 2mm
25/-
kV/mm
IEC 60243-1
OTHER PROPERTIES
DRY/COND.
UNIT
TEST NORM
Humidity absorption, 80mil
2.2/*
%
Sim. to ISO 62
Water absorption, 80mil
7.6/*
%
Sim. to ISO 62
Density
1230/-
kg/m3
ISO 1183
Water Absorption, Immersion 24h
1.7/*1
%
Sim. to ISO 62
1: 3.2mm wall thickness
DRY/COND.
UNIT
TEST NORM
Humidity absorption, 80mil
2.2/*
%
Sim. to ISO 62
Water absorption, 80mil
7.6/*
%
Sim. to ISO 62
Density
1230/-
kg/m3
ISO 1183
Water Absorption, Immersion 24h
1.7/*1
%
Sim. to ISO 62
1: 3.2mm wall thickness
VDA PROPERTIES
DRY/COND.
UNIT
TEST NORM
Emission of organic compounds
6
μgC/g
VDA 277
DRY/COND.
UNIT
TEST NORM
Emission of organic compounds
6
μgC/g
VDA 277
INJECTION
DRY/COND.
UNIT
Drying Recommended
yes
Drying Temperature
80
°C
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
295
°C
Min. melt temperature
285
°C
Max. melt temperature
305
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
100
°C
Min. mold temperature
70
°C
Max. mold temperature
120
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm
Ejection temperature
210
°C
DRY/COND.
UNIT
Drying Recommended
yes
Drying Temperature
80
°C
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
295
°C
Min. melt temperature
285
°C
Max. melt temperature
305
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
100
°C
Min. mold temperature
70
°C
Max. mold temperature
120
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm
Ejection temperature
210
°C
CHEMICAL MEDIA RESISTANCE
Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
Hydrochloric Acid (36% by mass), 23°C
Nitric Acid (40% by mass), 23°C
Sulfuric Acid (38% by mass), 23°C
Sulfuric Acid (5% by mass), 23°C
Chromic Acid solution (40% by mass), 23°C
Bases
Sodium Hydroxide solution (35% by mass), 23°C
Sodium Hydroxide solution (1% by mass), 23°C
Ammonium Hydroxide solution (10% by mass), 23°C
Alcohols
Isopropyl alcohol, 23°C
Methanol, 23°C
Ethanol, 23°C
Hydrocarbons
n-Hexane, 23°C
Toluene, 23°C
iso-Octane, 23°C
Ketones
Acetone, 23°C
Ethers
Diethyl ether, 23°C
Mineral oils
SAE 10W40 multigrade motor oil, 23°C
SAE 10W40 multigrade motor oil, 130°C
SAE 80/90 hypoid-gear oil, 130°C
Insulating Oil, 23°C
Standard Fuels
ISO 1817 Liquid 1 - E5, 60°C
ISO 1817 Liquid 2 - M15E4, 60°C
ISO 1817 Liquid 3 - M3E7, 60°C
ISO 1817 Liquid 4 - M15, 60°C
Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C
Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 90°C
Diesel fuel (pref. ISO 1817 Liquid F), >90°C
Salt solutions
Sodium Chloride solution (10% by mass), 23°C
Sodium Hypochlorite solution (10% by mass), 23°C
Sodium Carbonate solution (20% by mass), 23°C
Sodium Carbonate solution (2% by mass), 23°C
Zinc Chloride solution (50% by mass), 23°C
Other
Ethyl Acetate, 23°C
Hydrogen peroxide, 23°C
DOT No. 4 Brake fluid, 130°C
Ethylene Glycol (50% by mass) in water, 108°C
1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C
50% Oleic acid + 50% Olive Oil, 23°C
Water, 23°C
Water, 90°C
Phenol solution (5% by mass), 23°C
Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
Hydrochloric Acid (36% by mass), 23°C
Nitric Acid (40% by mass), 23°C
Sulfuric Acid (38% by mass), 23°C
Sulfuric Acid (5% by mass), 23°C
Chromic Acid solution (40% by mass), 23°C
Bases
Sodium Hydroxide solution (35% by mass), 23°C
Sodium Hydroxide solution (1% by mass), 23°C
Ammonium Hydroxide solution (10% by mass), 23°C
Alcohols
Isopropyl alcohol, 23°C
Methanol, 23°C
Ethanol, 23°C
Hydrocarbons
n-Hexane, 23°C
Toluene, 23°C
iso-Octane, 23°C
Ketones
Acetone, 23°C
Ethers
Diethyl ether, 23°C
Mineral oils
SAE 10W40 multigrade motor oil, 23°C
SAE 10W40 multigrade motor oil, 130°C
SAE 80/90 hypoid-gear oil, 130°C
Insulating Oil, 23°C
Standard Fuels
ISO 1817 Liquid 1 - E5, 60°C
ISO 1817 Liquid 2 - M15E4, 60°C
ISO 1817 Liquid 3 - M3E7, 60°C
ISO 1817 Liquid 4 - M15, 60°C
Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C
Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 90°C
Diesel fuel (pref. ISO 1817 Liquid F), >90°C
Salt solutions
Sodium Chloride solution (10% by mass), 23°C
Sodium Hypochlorite solution (10% by mass), 23°C
Sodium Carbonate solution (20% by mass), 23°C
Sodium Carbonate solution (2% by mass), 23°C
Zinc Chloride solution (50% by mass), 23°C
Other
Ethyl Acetate, 23°C
Hydrogen peroxide, 23°C
DOT No. 4 Brake fluid, 130°C
Ethylene Glycol (50% by mass) in water, 108°C
1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C
50% Oleic acid + 50% Olive Oil, 23°C
Water, 23°C
Water, 90°C
Phenol solution (5% by mass), 23°C
