东莞市融泰得新材料有限公司
Ingeo? 6201D
聚乳酸
NatureWorks? LLC
产品说明：
Ingeo biopolymer 6201D, a NatureWorks LLC product, is a thermoplastic fiber-grade resin derived primarily from annually renewable resources. Available in pellet form, 6201D is designed for extrusion into mechanically drawn staple fibers or continuous filament, using conventional fiber spinning and drawing equipment. 6201D is typically well suited for fiber processes where lower fiber shrinkage is desired: partially orientated yarn (POY), fully drawn yarn (FDY), staple fibers, and continuous filament. Ingeo biopolymer 6201D can be converted into a broad range of fiber products.
Potential applications for PLA polymer 6201D include:
Woven and knitted continuous filament apparel
Woven and knitted, intimate
Staple blend fabrics including blends with cotton, wool, and other fibers
Woven and knitted fabrics and netting for civil engineering applications
Home furnishings
| 基本信息 | |
|---|---|
| 特性 |
|
| 用途 |
|
| 机构评级 |
|
| 形式 |
|
| 加工方法 |
|
Ingeo? 6201D 物性表
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 比重 | 1.24 | g/cm3 | ASTM D792 |
| 熔流率（熔体流动速率） (210°C/2.16 kg) | 15 到 30 | g/10 min | ASTM D1238 |
| 收缩性 | ASTM D2102 | ||
| Boiling Water | 5.0 到 15 | % | ASTM D2102 |
| Hot Air : 130°C 1 | 5.0 到 15 | % | ASTM D2102 |
| 相对粘度 | 3.10 | 内部方法 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 弹性模量 | 30.0 到 40.0 | g/denier | ASTM D2256 |
| 补充信息 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| Denier - per filament | > 0.500 | ||
| Elongation of Fibers | 10 到 70 | % | ASTM D2256 |
| Tenacity of Fibers | 2.50 到 5.00 | g/denier | ASTM D2256 |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 玻璃转化温度 | 55.0 到 60.0 | °C | ASTM D3417 |
| 结晶峰温度 (DSC) | 155 到 170 | °C | ASTM D3418 |
| 充模分析 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 熔体密度 (230°C) | 1.08 | g/cm3 |
| 挤出 | 额定值 | 单位制 | |
|---|---|---|---|
| 干燥温度 | 80.0 | °C | |
| 干燥时间 | 4.0 到 6.0 | hr | |
| 建议的水分含量 | <5.0e-3 | % | |
| 熔体温度 | 220 到 240 | °C |
| 备注 | |
|---|---|
| 1 . | 10 min |
