东莞市常平平治塑胶原料贸易行
Asaflex 800S
苯乙烯-丁二烯-苯乙烯嵌段共聚物
AKelastomers
产品说明：
Injection & extrusion molding grade. For molded products with superior rigidity, and good surface appearance. It is supplied in pellet form.
Containers, stationery goods, toys, and consumer goods.
Containers, stationery goods, toys, and consumer goods.
|
|
| 用途 |
|
| 外观 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 1.02 | g/cm3 | ISO 1183 |
| 熔流率（熔体流动速率） (200°C/5.0 kg) | 6.0 | g/10 min | ISO 1133 |
| 收缩率 | 0.20 到 0.80 | % | |
| 吸水率 (23°C, 24 hr) | < 0.10 | % | ISO 62 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 洛氏硬度 (R 计秤) | 78 | ISO 2039-2 | |
| 肖氏硬度 (邵氏 D) | 75 | ISO 868 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 拉伸应力 (屈服) | 41.0 | MPa | ISO 527-2/5 |
| 拉伸应变 (断裂) | 12 | % | ISO 527-2/5 |
| 弯曲模量 | 2250 | MPa | ISO 178 |
| 弯曲应力 | 54.0 | MPa | ISO 178 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 简支梁缺口冲击强度 (完全断裂) | 1.1 | kJ/m2 | ISO 179 |
| 简支梁无缺口冲击强度 (完全断裂) | 23 | kJ/m2 | ISO 179 |
| Grade | MFR*1 | Flexural Modulus |
Vicat Softening Point*2 |
Haze*3 | Applications |
|---|---|---|---|---|---|
| 800S | 6 | 2250 | 96 | 3.0 | Food PackagingMedicalTransparent Molded Products |
| 805 | 10 | 1550 | 91 | 0.5 | FootwearMedicalTransparent Molded Products |
| 810 | 5 | 1400 | 83 | 1.2 | Polymer ModificationAdhesives and SealantsFootwearTransparent Molded Products |
| 815 | 6 | 1200 | 82 | 0.5 | Food PackagingPolymer Modification |
| 825 | 6 | 1200 | 82 | 0.5 | Polymer ModificationFootwearTransparent Molded Products |
| 830 | 6 | 1100 | 72 | 2.0 | Polymer ModificationTransparent Molded Products |
| 835 | 6 | 1100 | 72 | 2.0 | Food PackagingPolymer Modification |
| 840 | 7 | 1500 | 81 | 1.2 | Polymer ModificationTransparent Molded Products |
| 845 | 7 | 1500 | 81 | 1.2 | Food PackagingPolymer Modification |
*1 200°C, 5kgf
*2 10 N Load, 50 K/h
*3 2mm Thick Plate
