Teflon? PFA 940HP Plus
全氟烷氧基
产品说明：
For inventory control purposes product name may be followed by an X.
Products labeled PFA 940HP Plus and PFA 940HP Plus X are equivalent and all information in this document is applicable to both.
Typical Application
With a typical MIT folding endurance of 300,000* cycles, DuPont? Teflon ? PFA 940HP Plus is designed to withstand repeated flexing and aggressive chemical stress-cracking agents. Applications for Teflon ? PFA 940HP Plus include fluid handling components for high-performance chemical delivery systems, as well as tubing, unsupported pipe linings for the production of ultra-pure chemicals, and semiconductor components where purity in the parts-per-billion range is critical.
Description
DuPont? Teflon ? PFA 940HP Plus is a premium fluoroplastic resin available in pellet form. Teflon ? PFA 940HP Plus possess-es the same exceptional chemical resistance, high purity, and protection against ionic contamination as Teflon ? PFA HP grades with the added benefits of improved flex life (typical MIT flex of 300,000*) and chemical stress-crack resistance. Teflon ? PFA 940HP Plus meets the increasingly stringent requirements for ultra-reliable and non-contaminating parts, as well as unmatched HCl permeation resistance. The improved flex life and chemical resistance will reduce the cost of ownership of high purity fluid handling systems by reducing downtime caused by mechanical or chemical stresses. Additionally, parts molded with Teflon ? PFA 940HP Plus have improved clarity and a smooth finish, which can further help prevent buildup of microbial contamination in water handling systems. Table 1 shows the typical property data for Teflon ? PFA 940HP Plus.
This special purpose resin has a relatively high melt flow rate (typical MFR of 16), which permits higher extrusion speed and easier processing. The enhanced resistance to environmental stress-cracking makes Teflon ? PFA 940HP Plus a preferred resin when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. Additionally, the enhanced purity of Teflon ? PFA 940HP Plus makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Examples are in semiconductor manufacture, fluid handling systems for industry or life sciences, and instrumentation for precise measurements of fluid systems. Teflon ? PFA 940HP Plus combines the processing ease of conventional thermoplastics with the properties similar to those of polytetrafluoroethylene.
With Teflon ? PFA 940HP Plus, components can last longer under dynamic loads and resist damage caused by ozonated fluids and fluorosurfactants. Combined with excellent chemical, permeation, and stress-crack resistance, this durability leads to a reduced cost of ownership. The high purity and fully fluorinated molecule end groups of Teflon ? PFA 940HP Plus can reduce contamination to protect process yields.
Properly processed products made from neat Teflon ? PFA 940HP Plus resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes and excellent weather resistance.
In a flame situation, products of Teflon ? PFA 940HP Plus resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
Teflon ? PFA 940HP Plus meets the requirements of ASTM D3307, Type IV
Teflon? PFA 940HP Plus 物性表
| 基本信息 |
|
| 特性 |
纯度高 低摩擦系数 低吸湿性 低烟度 高 ESCR（抗应力开裂） 良好的电气性能 良好的柔韧性 流动性高 耐化学性良好 耐气候影响性能良好 耐热性，中等 热稳定性，良好 韧性良好 中等透明度 |
| 用途 |
|
| 形式 |
|
| 加工方法 |
|
| 物理性能 |
额定值 |
单位制 |
测试方法 |
| 比重 |
2.14 |
g/cm3 |
ASTM D792 |
| 熔流率（熔体流动速率） (372°C/5.0 kg) |
16 |
g/10 min |
ASTM D3307, ISO 12086 |
| 吸水率 (24 hr) |
< 0.030 |
% |
ASTM D570 |
| 硬度 |
额定值 |
单位制 |
测试方法 |
| 肖氏硬度 (邵氏 D) |
55 |
|
ASTM D2240, ISO 868 |
| 机械性能 |
额定值 |
单位制 |
测试方法 |
| 抗张强度 |
|
|
ASTM D3307, ISO 12086 |
| 23°C |
28.0 |
MPa |
ASTM D3307, ISO 12086 |
| 200°C |
11.0 |
MPa |
ASTM D3307, ISO 12086 |
| 伸长率 |
|
|
ASTM D3307, ISO 12086 |
| 断裂, 23°C |
310 |
% |
ASTM D3307, ISO 12086 |
| 断裂, 200°C |
450 |
% |
ASTM D3307, ISO 12086 |
| 弯曲模量 |
|
|
ASTM D790, ISO 178 |
| 23°C |
650 |
MPa |
ASTM D790, ISO 178 |
| 200°C |
60.0 |
MPa |
ASTM D790, ISO 178 |
| 热性能 |
额定值 |
单位制 |
测试方法 |
| 熔融温度 |
290 |
°C |
ASTM D4591 |
| 电气性能 |
额定值 |
单位制 |
测试方法 |
| 体积电阻率 |
1.0E 18 |
ohms·cm |
ASTM D257, ISO 1325 |
| 介电强度 |
|
|
|
| 0.250 mm 1 |
80 |
kV/mm |
ASTM D149 |
| 0.250 mm |
80 |
kV/mm |
IEC 60243-1 |
| 介电常数 (1 MHz) |
2.03 |
|
ASTM D150, IEC 60250 |
| 耗散因数 (1 MHz) |
< 2.0E-4 |
|
ASTM D150, IEC 60250 |
| 可燃性 |
额定值 |
单位制 |
测试方法 |
| UL 阻燃等级 2 |
V-0 |
|
UL 94 |
| 极限氧指数 |
> 95 |
% |
ASTM D2863, ISO 4589-2 |
| 补充信息 |
额定值 |
单位制 |
测试方法 |
| Critical Shear Rate (372°C) |
56.0 |
sec^-1 |
|
| MIT Folding Endurance 3(200.0 μm) |
3.0E 5 |
Cycles |
ASTM D2176 |
| Weather and Chemical Resistance: Outstanding |
|
|
|
| 备注 |
| 1 . |
方法A（短时间） |
| 2 . |
These results are based on laboratory tests under controlled conditions and do not reflect performance under actual fire conditions, current rating is a typical theoretical value. |
| 3 . |
Depending on fabrication conditions |
